Your only problem then is to find a sufficiently flat enough surface
on the outside hull above the keel to be able to mount the flange,
before you drill the hole. Scary thought.
--- In Sabresailboat@..., john kalinowski
<sabre32sailor@y...> wrote:
Too bad, the centerboard models have one built in for the factory
harpoon tool to "encourage" the board to go down when it sticks. For
the winter, you just unthread the cap...
Brooks Wright <bwright847@y...> wrote:
I have a fixed keel.
--- sailsabre34 <sailsabre34@y...> wrote:
--- In Sabresailboat@..., "bwright847"
<bwright847@y...>
wrote:Do have a CB or a fixed keel?
Okay, I'm aboard. Now how about a drain for the
bilge. I know some of
you have done this. I'm thinking it should go on
the vertical wall of
the bilge as far down by the top of the keel
(bottom of the bilge
where the bolts come out) as it will go. Any
suggestions?
Brooks Wright
S34 #31
__________________________________
Yahoo! FareChase: Search multiple travel sites in one click.
---------------------------------
YAHOO! GROUPS LINKS
Visit your group "Sabresailboat" on the web.
To unsubscribe from this group, send an email to:
Sabresailboat-unsubscribe@...
Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
---------------------------------
---------------------------------
Yahoo! FareChase - Search multiple travel sites in one click.
Michael Sims