¿ªÔÆÌåÓý
I should have also mentioned there are dual check valves isolating the fresh water from back flowing into the water tanks and the Smart Control key pad is very user friendly. ?Whatever brand you decide upon, the admiral and the crew will love the upgrade.
Don Fleming From: [email protected] <[email protected]> on behalf of Oceans via groups.io <oceans100t@...>
Sent: Wednesday, February 26, 2025 8:36 PM To: [email protected] <[email protected]> Subject: Re: [SabreSailboat] Electric Head with Macerator ?
Tim,?
FYI, The SeaEra Toilet I installed allows for the macerator base to be rotated 90? in three directions. ?The Sea Water Models do have an anti-syphon valve (Series 188A, 288A, N388 and LF188A, LF288A, LFN388) as well as a shut off valve and a remote seawater
pump with separate filter/strainer. ?The Pressurized Fresh Water Model does not need the above items because it operates by way of the boat¡¯s pressure water system.
I¡¯m not?sure if it will fit in the 38 MkII, but the platform in the 38 MkI has a somewhat narrow depth where the unit fit well with no modification other than moving screw holes approximately1/4¨C1/2¡±.
The overboard discharge capability is independent of the operation of the toilet unit in any of its various configurations. ?Waste is macerated at the toilet base prior to being pumped to the holding tank.
Don Fleming
Duet
S-38-1 #77
Hudson River
From: [email protected] <[email protected]> on behalf of Tim Rivard via groups.io <tarivard@...>
Sent: Tuesday, February 25, 2025 9:16 PM To: [email protected] <[email protected]> Subject: Re: [SabreSailboat] Electric Head with Macerator ?
Thanks Don,
?
This is specific to the 38-II as the foot print is limited and I am wondering if you can mount the macerator 90 degrees to the bowl.
I think you can from what I have read online but wanted to see if anybody has done it yet.
?
It could possibly be hooked to starlink only for "flush mode" :-)
?
I won't be able to flush overboard as the boat is now compliant for the great lakes - I removed the y valve and it will only flush to the holding tank.
?
There is also no anti-siphon valve on the intake hose which I find strange.? I will be installing one.
?
Tim R
38MKII in refit
|
