¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. SHARI
  2. Topics

PI-HAt on A+ - 1 USB port

 

I have on order a pi-hat that I would like to use with a pi 3 A+ board. Be a great portable package.

I am seeing great documentation on the pi 3 B+ with pictures on were to solder the wires for the JST jack.

Is anyone using the pi-3 A+ with the one USB port and have pictures were these wires will solder to?

I do have the pi 3 B+ boards but would prefer the pi 3 A+.

Thanks

Dave/AD4UUI
 

Solder the red and black wires to the test pads associated with the two middle pins (Tp22 and TP23) of the USB connector.? Looking at a picture of the bottom of the board on the web, I think the black wire should be the test pad to the right when you are looking at the board such that the test pad is above the actual pin.(TP23).
 

¿ªÔÆÌåÓý

image0.jpeg

Like this or is it the other way around?

On Feb 5, 2023, at 10:55, N8AR <n8ar73@...> wrote:

?Solder the red and black wires to the test pads associated with the two middle pins (Tp22 and TP23) of the USB connector.? Looking at a picture of the bottom of the board on the web, I think the black wire should be the test pad to the right when you are looking at the board such that the test pad is above the actual pin.(TP23).

 

Hello Steve, Thanks very much for your response.? Attached is the picture on one of my Pi 3 A+ boards.? Showing PP23 and PP24.
Are these the same as TP23 and TP24.? I would solder to these two pins to the right of the PP22 and PP23 labels.

Picture attached

Thank you

Dave/AD4UU

RPI 3 A _.jpg

 

I think PP23 is Black (D-) and PP22 is Red (D+).? If that doesn't work just swap them
 

Thank you Steve and Luis for the picture, Helps a lot. Will give it a go when I get my pi-hat.

Thanks again.

Dave/AD4UU

On Sun, Feb 5, 2023 at 10:23 PM N8AR <n8ar73@...> wrote:
I think PP23 is Black (D-) and PP22 is Red (D+).? If that doesn't work just swap them

 

¿ªÔÆÌåÓý

This configuration works.?

Thanks Steve.?

image0.jpeg


On Feb 6, 2023, at 05:23, Dave Livesay <dmlad4uu@...> wrote:

?
Thank you Steve and Luis for the picture, Helps a lot. Will give it a go when I get my pi-hat.

Thanks again.

Dave/AD4UU

On Sun, Feb 5, 2023 at 10:23 PM N8AR <n8ar73@...> wrote:
I think PP23 is Black (D-) and PP22 is Red (D+).? If that doesn't work just swap them

1 - 7 of 7