ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
esc to dismiss
LCD display
|
I was wondering if anyone has used a small lcd display for there Shari node. ?Maybe in a 3d printed case?
|
Does the software support small (or any) displays? What would you want it to display? System stats (IP, temp)? Nodes linked to? There is no 'who's transmitting' info to display...
After IP, temp, and up time I'm not sure what else is important/useful to display...
toggle quoted message
Show quoted text
On Nov 22, 2024, at 14:05, jeff luce via groups.io <jefferyluce@...> wrote:
? I was wondering if anyone has used a small lcd display for there Shari node. ?Maybe in a 3d printed case?
|
Ken,
?
I would like to see that! Would it be on a 3.5 inch display? It sounds like it would look similar to the Zumspot Elite.
?
73’蝉
--
Dennis - KD9ULM
|
I was thinking hamvoip.? That runs a web server.
Does the software support small (or any) displays? What would you want it to display? System stats (IP, temp)? Nodes linked to? There is no 'who's transmitting' info to display...
After IP, temp, and up time I'm not sure what else is important/useful to display... Ken, N2VIP ? I was wondering if anyone has used a small lcd display for there Shari node.? Maybe in a 3d printed case?
|
Dennis,
It's not my idea, I just fleshed out what Jeff mentioned.
There is no 'contact info' to share, since there are no DMR IDs nor a database to query, so all it could really display is SHARI status info.
This does not, to the best of my knowledge, exist - I'm just discussing possibilities.
toggle quoted message
Show quoted text
On Nov 22, 2024, at 19:11, Dennis <dczajkowski@...> wrote:
? Ken,
?
I would like to see that! Would it be on a 3.5 inch display? It sounds like it would look similar to the Zumspot Elite.
?
73’蝉
--
Dennis - KD9ULM
|
Hello Dennis,
i am unsing that kind of LCD. But only a 2x16LCD. That shows me the connected TG and if its Online or not.
73 de OE9SAU
?
https://fm-funknetz.de/svxlink-remote-display/
|
|
|
Such a display could essentially show the same info that is available in Supermon, Allmon, or lsnode. If it were a nextion it would be possible to also enable simple commands like link and unlink. ?
I have such an interface on my mmdvm hotspot, it’s not that useful. Mostly a novelty. ?I only use it to power cycle the node.?
Honestly if you’re somewhere where you can stare at your node, you can just have a cheap tablet or old smartphone with a browser available to just access Supermon/Allmon/Allscan/etc.?
/jim N6KRJ?
toggle quoted message
Show quoted text
Dennis,
It's not my idea, I just fleshed out what Jeff mentioned.
There is no 'contact info' to share, since there are no DMR IDs nor a database to query, so all it could really display is SHARI status info.
This does not, to the best of my knowledge, exist - I'm just discussing possibilities. Ken, N2VIP ? Ken,
?
I would like to see that! Would it be on a 3.5 inch display? It sounds like it would look similar to the Zumspot Elite.
?
73’蝉
--
Dennis - KD9ULM
|
I like small displays on pi-star hotspots (0.96") so I can confirm it's on, running normally, internet connected, and what the ip address is. This is most important on a hotspot I may move between locations.
toggle quoted message
Show quoted text
On Nov 23, 2024, at 10:37, Jim N6KRJ via groups.io <n6krj@...> wrote:
?
Such a display could essentially show the same info that is available in Supermon, Allmon, or lsnode. If it were a nextion it would be possible to also enable simple commands like link and unlink. ?
I have such an interface on my mmdvm hotspot, it’s not that useful. Mostly a novelty. ?I only use it to power cycle the node.?
Honestly if you’re somewhere where you can stare at your node, you can just have a cheap tablet or old smartphone with a browser available to just access Supermon/Allmon/Allscan/etc.?
/jim N6KRJ?
Dennis,
It's not my idea, I just fleshed out what Jeff mentioned.
There is no 'contact info' to share, since there are no DMR IDs nor a database to query, so all it could really display is SHARI status info.
This does not, to the best of my knowledge, exist - I'm just discussing possibilities. Ken, N2VIP ? Ken,
?
I would like to see that! Would it be on a 3.5 inch display? It sounds like it would look similar to the Zumspot Elite.
?
73’蝉
--
Dennis - KD9ULM
|
?
Ken,
?
I’m in agreement with you on your points you mentioned. It doesn’t need to be flashy, just something simple with information that you mentioned.
Dennis - KD9ULM
|
This works! I've used it myself on hamvoip image
toggle quoted message
Show quoted text
I like small displays on pi-star hotspots (0.96") so I can confirm it's on, running normally, internet connected, and what the ip address is. This is most important on a hotspot I may move between locations. Ken, N2VIP ?
Such a display could essentially show the same info that is available in Supermon, Allmon, or lsnode. If it were a nextion it would be possible to also enable simple commands like link and unlink. ?
I have such an interface on my mmdvm hotspot, it’s not that useful. Mostly a novelty.? I only use it to power cycle the node.?
Honestly if you’re somewhere where you can stare at your node, you can just have a cheap tablet or old smartphone with a browser available to just access Supermon/Allmon/Allscan/etc.?
/jim N6KRJ?
---- On Fri, 22 Nov 2024 20:10:15 -0800 Ken N2VIP< ken@...> wrote ----
Dennis,
It's not my idea, I just fleshed out what Jeff mentioned.
There is no 'contact info' to share, since there are no DMR IDs nor a database to query, so all it could really display is SHARI status info.
This does not, to the best of my knowledge, exist - I'm just discussing possibilities. Ken, N2VIP ? Ken,
?
I would like to see that! Would it be on a 3.5 inch display? It sounds like it would look similar to the Zumspot Elite.
?
73’蝉
--
Dennis - KD9ULM
|
Dennis
Martin OE9SAU
Jim N6KRJ