开云体育

HI? ?i am? happy? to say? i went? thru? al the? ? instructions? to setup my? SHARI node i was? expecting? to hear a lot more? after? i finished.... what else? do i have? to do? to be

I believe what you are looking for is created in the /root/SA818.log file. Kind regards, Sean KO4YWF

I have one. I'm good on QRZ.

A few other tips with dvsm In the app setup for your local IP and your external IP I ran into an issue if I'm on the local WiFi I con't connect via my external IP. The other option is unchecked half

This is true, though I will say that it is advantageous to have another dedicated node (not necessarily a second physical Pi) if you want to use Analog_Reflector via USRP to communicate with HamVoIP

Doug, That's great, glad you got it working and glad you shared the summary. Ken, N2VIP

Thanks very much, Ryan!? In the end, I started over with a clean Hamvoip installation, set it up with simpleusb to be able to use my Yaesu handheld, setup Echolink and then Supermon.? Once that was

looking for a vhf one,, interested if you still have it... thanks

Hello, This link maybe helpful just google translate from tagalog to english. Two nodes in single sd card https://philippineallstarlink.net/news-updates-blogs/dalawang-node-sa-isang-raspberry-pi/ Sent

what I meant was you can use RF and "Soft-Phones"? to connect to the one Pi. You don't need one dedicated to RF and another for IAXRPT. Plus that will make your echolink experience easier. Also when

Hello Ryan, Thank you for your comment.? I was looking into it this morning, and it doesn't look too difficult to put two nodes on the same instance of Hamvoip.? Here is what I figure: rpt.conf -

Hello Ryan, Following up on my request from earlier this morning, I found a resource that may help me muddle through this: https://wiki.allstarlink.org/wiki/Two_Nodes_on_One_Server Thanks, Doug

A bit of an addendum on Echolink.? I did find a partial workaround: * Set up a permanent connection between the two nodes; * Set up Echolink on the first node (Node 1), using the instructions found

You only need one Pi to do all that. I have a second Pi wish a SHARI for mobile operations , example a few weeks back I took it to SeaSide, Or for SeaPac and hooked a openstub Jpole to it. So I could

Good morning, Just wanted to give an update.? I think all of my questions have been answered or resolved. * Since I had a spare Raspberry Pi, decided to set up two nodes using NNX

Thank you for the information - greatly appreciated - cheers!

Hello Patrick, Thank you for your suggestion.? I tried your settings and liked the transmitted audio, but was still getting some clipping on the voice telemetry.? So, I played around, and found a

SA818.log

You can turn the telemetry gain down, as others have suggested. However, I find that a much better fix is to turn down the Tx DSP Level setting in SimpleUSB. HamVoIP defaults to having this all the

You stated, "save the programmed parameters to a file in the root directory. " What, then, is the name of that file?