开云体育

True, but I constantly fiddle so I left that in there. -Michael Sent: Monday, February 13, 2023 8:09 PM To: [email protected] Subject: Re: [SHARI] Channel changing script Thanks for sharing this cool

Thanks for sharing this cool idea. This begs the question in my mind whether the SA818-prog script could be adapted to have an "unattended" mode, so that it could be reused for this type of

I cobbled together a simple script to change frequencies faster on the SHARI pi hat using DTMF. I had a need to be able to change it on the fly as some areas I frequent have interference and remoting

1) apt install raspberrypi-kernel-headers 2) For Debian 11: git clone https://github.com/encbar5/ASL-DAHDI.git --branch 5.9_kernel or for previous Debian: https://github.com/ke5gdb/ASL-DAHDI.git

It can happen to any radio. MY oldest FT60 is more than 12y old and in the past few months one of the keys has been acting finnicky. I probably need to pull it apart and do a cleaning. FT60 was well

This has been my experience as well, but I have only had a few hours of free time to work with it. I can say that the Libre looks like it would make a fine MMDVM for DMR etc, but it sure has a bad

I'm monitoring this thread from the sidelines. Just wondering if this old Allstar beta patch discussion is related to getting dahdi running on arm64? https://github.com/AllStarLink/ASL-DAHDI/pull/1

Wow, can you guide me on what you did? I tried installing DVSwitch with allstar using Buster image and even loading Raspbian on Libre le potato, then install DVS with Allstar. Same result dadhi fails

Hey Mark; I’m quickly beginning to suspect that you are right that this may be a radio specific issue with my VX-6 keypad. I’m able to control my node with DTMF tones sent from my FT-60 without

Download this file from the Files section of this group. /g/SHARI/files/Setting%20the%20RX%20Level%20in%20HamVOIP%20Allstar.pdf It will allow you to see your DTMF levels when setting

Hi Patrick. I’m continuing to experiment with RX levels and other settings in simple usb. And I have been able to improve things a bit. Thanks for the reply. 73. wrote:

Does lsusb from the bash shell command line show the CH340?

I'm trying to reprogram the SA818 on my Pi3U. After launching SA818-prog, it says "Testing serial communications" then, "No Serial Communication with the SA818 module" I've never had issues with SA818

Check your RX level and/or de-emphasis settings in simpleusb. My guess is that something is messed up with one or both of these.

The problem lies in the radio. I have the same problem with my FT1D Bill Paulus KD2EOY Vice President SCARA WWW.K2BR.COM Southern Counties Amateur Radio Association

I'm thinking that either the VX-6 keypad is extremely sensitive or you are inadvertently sending tones more than once. The fact that it works well with Supermon shows it's likely a keypad issue. I

Hey everyone; I've got a SHARI Pi3U and when I attempt to send DTMF commands from my Yaesu VX-6 ht, the asterisk CLI client shows duplicate DTMF characters received. For example, if I keyup and press

This configuration works. Thanks Steve.

Could you explain what you mean by this? I built DAHDI on aarch64 for Debian 11 running on a Raspi4, and it's been running this way for over a year.

That's the answer I was looking for.? Thanks! Mike VA6PLC