开云体育

Try the Parrot+ server 55553 I thought that’s the one he did try, and the one I mentioned was sending out a continuous 1K tone?

Hi. I experienced the exact same thing today. Had to unplug my node from power to get it to disconnect. So, must be a a server issue and not an issue on your end. Dave K3DFG Dave Gilbert Sales and

Sorry, I guess that is the one you tried. It works for me if that's any help.

Try the Parrot+ server 55553 [email protected]> wrote:

I just tried connecting and that sound you hear is a 1 kHz tone. I’ll let N2DYI know.

From: [email protected] <[email protected]> On Behalf Of Derek Velez KK4QGD via groups.io Hi I was testing a new HT and antenna set up on SHARI and I wanted to see how well it worked. I tried to connect

Hi I was testing a new HT and antenna set up on SHARI and I wanted to see how well it worked. I tried to connect my node to 55553 as recommended in the SHARI instructions to test the sound quality and

Where are you taking orders? 73 KO4NCC Jeff

Without sounding dumb how do I tell, the model I got was the pi3u? but beyond that I don't know. I've had the setup for about 4 years

Hi Brett. Great looking case.? Do you have more pics of the inside and how everything mounts up ? -Jeff

Here is what I found.? When you first start the ASL3 installation. it automatically installs updates but does not reboot.? Without the reboot, you get the connection failed message.? So do a reboot

And as soon as I hit send I decided to remove the console= again and it works. Sigh. -Michael Sent: Sunday, December 1, 2024 4:46 PM To: [email protected] Subject: [SHARI] New pi4 SHARI pihat I am

I am trying to program the frequency on a SHARI pihat. It's a pi4 I loaded ASL3 Tried without and then added the console=serial0,115200 to the end of cmdline.txt Verified bt was disabled in config.txt

I used the repeaterbook app and checked the frequency I wanted to use and 5 MHz up and down within 25 miles of my site. All good here.

As a new ham, myself.... other than listening to your ALSN frequency with no PL tone and checking repeaterbook in your area, is there any other thing we should do to stay out of the "hardway" column ?

It's worth mentioning that 446.1 mHz is indeed an active repeater input in some places. Someone in Brooklyn who had a SHARI and didn't change it's frequency found that out the hard way once.

Well, that did the trick Thanks for troubleshooting, greatly appreciated! 73 [email protected]> wrote:

My Yaesu DR-1X automatically shifts the TX frequency by 600 kHz at 446.100 MHz until I change it.? Check and make sure yours is set to simplex.? ?CONFIG>RPT SHIFT>SIMPLEX

No change (photo) before/during PPT Thanks [email protected]> wrote:

In simpleusb menu Item V do COS and PTT change when you key your HT?