开云体育

The call request is geting there.? IAX sends the call to context [radio secure] in your extensions.conf Look for that context and make sure you have an entry for your node.

52477@radio-secure' does not exist Check your extensions.conf [Radio secure] Make sure there is an entry there for your node. That extension has to be defined in that context. Use the example 1999 add

Hi, Chris, Thanks for the reply. Yes, 4569 is forwarded to the IP of my node.

Thanks, Steve. I'll ask over there. I've checked the bind address, and the port is forwarded, so I'm stumped. You know what? I was in Ypsi a couple of months ago. I think I missed a prime opportunity

You have port 4569 forwarded in your router? 73, Chris <https://www.qrz.com/db/ve3rwj> VE3RWJ on qrz.com <https://twitter.com/smartguitar1> Follow Me On Twitter Sent: December 22, 2022 4:16 PM To:

This can be caused by improper assignment of nodes to servers on Allstarlink.com.? For most of us, there should be a unique server with a unique binding address (4569, 4568, 4567, etc) for each

Hello everyone: I've been researching this for a couple of days and have also searched this group and not yet resolved this problem. My SHARI node will connect outbound to anything I ask it to. It

Gary, I agree, that's why I've bought over 6 kits from Steve. I'm sure he'd be selling more if there wasn't parts shortages. and Raspberry? PI's classified as UNOBTAINIUM. Last heard from Steve is

Some rather build than buy. Much like us car guys. To each their own.

Thanks Patrick, you actually did tell me exactly what I needed to know: telemetry isn't really configurable other than being on or off.? I think I was picturing it in a dial-plan somewhere.? I will

You can't do that through app.rpt. Telemetry isn't really configurable other than if it's on all the time, off, or on for a couple of minutes after each command. One could theoretically write a script

I guess I was imagining it.? Whether it says call signs or node numbers, it's just too long for me.? I know my node is connected or I wouldn't be hearing it so I don't need it to mention my node at

I do not think you can do that, but why don’t you change it to say call signs instead of no numbers makes it a lot less annoying ne5l

I swore I saw this when I first installed Allstar (HamVoip).? I want to disable the announcement of my local node number when a connection is established.? Currently the announcement states "node

Hum... Sounds like the extra 5 bucks I paid to have Steve do it was well worth the money!? Great job, Steve!

Thought I would put this out there....Ever since I put my PiHatU kit together, the Red and Yellow led's would not work.? Steve (N8AR) was kind enough to have a Zoom session, and we discovered that

Thank you for the update! It was a mystery for sure. 73 Fred McGuire, KD5FMU fred.mcguire.jr@...

Hi, thank you all for all the suggestions. After having a Zoom meeting with Steve N8AR, it was determined to be poor solder joints on pins 9, 10 and 11 on the SA818 radio module. The solder didn't

Be sure to use ferrite bead and several turns on the PI power cord ,. This helped me with him.. (TARRA) <tarra@...> wrote:

Keep in mind that just a change in the load of a switching power supply will change the frequencies in that supply. So it could still be something that you may have changed and never thought it would