开云体育

Manuals, Part Cross References & Schematics...ect: http://groups.yahoo.com/group/SAE_Talk/links http://groups.yahoo.com/group/SAE_Talk/files Repair/restore/rebuild

{\rtf1\mac\ansicpg10000\cocoartf824\cocoasubrtf410 {\fonttbl\f0\fswiss\fcharset77

Manuals, Part Cross References & Schematics..ect: http://groups.yahoo.com/group/SAE_Talk/links http://groups.yahoo.com/group/SAE_Talk/files Repair/restore/rebuild

This is an automated message sent upon subscription and as a Monthly reminder. Revised 6/17/04 Mark Gurries ======== LIST RULES ========== This list has a set of rules governing the discussion

UNSUBSCRIBE INSTRUCTIONS You have two ways to unsubscribe from this list. FIRST: 1) Sign in to http://groups.yahoo.com/mygroups. 2) Select Edit My Groups. 3) Look for the Group you wish to

File : Searching the archives.doc Description : A how to...plus some gotchas you need to know.

I have taken stuff to 20th century tv and stereo on montrose

Re: Electronic Engineers on Belmont Ave in Chicago. I took a Marantz 1060 in a few years ago; maybe beyond your criterion of recently. Good work, fair price, also explained options. Somewhat scary

I am considering taking my SAE 2200 power amp in for repairs and noticed the following on the groups list of vendors: Illinois Chicago Electronic Engineers, inc Roman Sokolov 1-773-202-0909 Does

I would recommend Mike Zuccaro. http://www.audiocraftsman.com <http://www.audiocraftsman.com/> Thanks, Scott

Good afternoon all.. My first choice, Mike Bettinger is no longer rebuilding GAS gear. I have a Godzilla GAS amp I am needing rebuilt. Does anybody have any recommendations on who has the expertise

Hi. Next month I am going to start looking for a SAE D 102 rack mount CD player to go in my rack with two 502 amps, P 102, T 102, C102. Any ideas let me know! Thanks, David in TX.

Check both channels bias and if they are similar,you can assume bias is set OK.Jon

The P10 has 2 pots per channel; There are L/R Pots for DC Adjust and L/R Pots for BIAS Adjust. The DC Adjust pots, to my understanding dial in the DC offset at the Speaker output. With no

There are 2 trimmer pots per channel. L and R Bias adjust and L and R DC adjust. I monitored the DC levels from the speaker out with no input or output loads and adjusted the L/R DC pots to give as

I've worked on a few of those and it's relatives, IIRC the DC offset is pretty much controlled by the STK module. I gave up on the last TWO receiver because of that STK module. As for the bias/ idle

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the SAE_Talk group. File : /p500_250_b MOD.jpg Uploaded by :

The same here: grabbed all the available documentation on ServiceManuals, recapped the PA10-P10 combo with Nichicon KA, KZ and Muse BP... But I'm still looking for the way to proper set internal

Does anyone here have the procedure to perform the voltage offset and bias adjustments for this amp? I've replaced all the caps in the unit and want to confirm bias and voltage offsets are properly

I'm looking for any service information on how to properly set the bias and offsets for this amp. I've got schematics for it, but alas, I can't find any other service information on the web.