开云体育

If anyone has rack handles that would fit a SAE 2600 that they are willing to sell please contact me. sjohnston1@... Thanks! Steve

You can find power strips with a remote cheap.? Here's one on Amazon for $14:

for an update on this. I figured out which IC is which as far as u1,u2,etc and have further dialed in the problem (I think) with no incoming signal starting with u6 (the first IC to receive a signal

The majority of the ICs are RC4136 opamps with a few LM339 comparators sprinkled in. I have 5000A myself but never had to work on it, yet. Obtaining those ICs is no problem if one is found to be bad,

I used just a normal $15.00 - $20.00 power strip on some of my seldom used systems. Then all you have to do is push on the red power switch on the power strip and away you go. I will also add that I

I currently have a sae 5000 and 2 sae 5000a's. one 5000a works properly one 5000a works properly on one channel but the other channel passes no sound when in the processing mode and the 5000 passes

I have found that today’s preamps do not have switched outlets, which poses problems as I contemplate a newer preamp. My SAE MARK IVC has no power switch and was designed to plug into a switched

It is the same person, his new company name is what I sent out. He does it right the first time and he does not cut corners like a lot of people out there. Armin

i have used mark at absolute sound for several of my sae and mcintosh stuff. he does really good work and is always available to talk to. if i recall was he not one of just a couple of dudes who mr

If you want it done right you can trust Mark at: website: WWW.AbSoundLabs.Com eMail:? ? AUDIOSONIC SERVICE ? ? ? ? ? ??Audiosonic@... Phone:(952) 894-5580 He restored my Mk31b to

Hello: I have had a Mark IVC for about 20 years. I inherited it from my dad, who bought it new. It still works nicely, but I suspect it could use some TLC if not more. The alternative is a new Yamaha

I have not looked but I recently learned SAE's new old stock of part like these and switches went to a surplus parts store. All Electronics Best Regards, Mark Gurries Electrical Engineer DCC Website &

https://groups.yahoo.com/neo/groups/SAE_Talk/photos/albums/465349168/lightbox/523703939?orderBy=ordinal&sortOrder=asc&photoFilter=ALL#zax/523703939

Opened my SAE Mark IVDM to take a look. Curious if these are original SAE Transistors? All the input and the other channel has the typical motorola SAE 103, SAE 204 etc etc numbers / transistors. I

HI Craig, Speaking of the MK VI, I have a MK VI that had a defective front end and 1st IF stage that I was able to repair. The unit had 2 defective FETs and a defective CA3053. I drew up the schematic

Luckily there not that many "special" parts in SAE, GAS, or SUMO preamps and amplifiers, the tuners are different story. I just finished a MKVI tuner a few weeks ago for the original owner, lots of

Kind of fun in some ways, but there was definitely some frustration involved!

Great detective work. Best Regards, Mark Gurr

Tom- Excellent detective work! You’ve also hit on one of the most frustrating things in the repair field: Parts that are technically still in production, but only available in large quantities and

I hope I’m not posting something everyone already knows, but I wanted to share my recent experience tracking down a balance slider for my 3022. After many google searches, I stumbled across a vendor