Going by my Esprit S3 lower arms (actually modified Elite), the bush
housing was 1.625" nominal OD, but the wall thickness is slightly
inconsistent. I suspect that it may have been bored in situ after
welding.
On Tue, 23 Apr 2024 at 02:02, palmer.jeff@... via groups.io
<palmer.jeff@...> wrote:
Thanks Paul. The video was very helpful.
I'm not familiar with DOM sizes, but the outside diameter of the bushing is 35mm at the ends and 34.94mm in the middle. Do you think reaming the ID of the tube will be required for a press fit or is there a stock DOM size that will not require reaming?
--
Paul Compton
www.paulcompton.co.uk (YouTube channel)
Paul Compton