Re: Info on how to assemble sjs sportscar new radiator and shroud
¿ªÔÆÌåÓýI looked through my pictures, but didn¡¯t see any great pictures showing the mounting tabs. I seem to remember that they were triangular at the top, and bolted to top of the radiator frame, and to the bottom of the frunk. The yellow thing is just a piece of padding that I was using to keep the radiator and condenser from backing together as I was installing them, as I lowered the car down onto the radiator. ?
? ? ? ? In the attached picture, you can see ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Here, you can see the studs on the A/C condenser that stick through the lower valance, and the holes for the holes that hold the radiator in place. ? ? I think I¡¯ll be putting my car up in the air tomorrow. I don¡¯t thin kI¡¯ll be able to get any better pictures because the lower pan is in the way, but I¡¯ll try. ? Bill ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? From: [email protected] <> On Behalf Of ZenHorizon via groups.io ? Hey all, my radiator, shroud and parts are finally here and im stumped. So i have here my old radiator and shroud. A complete prepared by claudious radiaor/fan/shroud setup ( that didnt fit after buying, so now its sueless as the radiator was too long to fit under the car. Due to this i orderted a new radiator, shroud, and upper and lower mounting brackets as well as foam from sjssportscars. Sadly it has no assembly insctructions. Im using the old one as a templater. The shroud has holes has dimples you can see where to drill the new mounting holes so that s no issue. The issue I am having is how do you attatch the bottom bracket to the radiator itself. Its the same size as the bracket on the bottom of the radiator. The bottom bracket has 2 bolt holes so you can mount the radiator to the shroud and besides the top that mounts it to the car, this is all that holds it on. I cannot see how the bracket goes on. I assumed it would slide in but it appears it does not. Has anyone bought and installed or done one of these? photos for reference |
Bill Galbraith
