|
I¡¯m looking for 36¡± & 48¡± cap top fans with good detail BTS has the brass 36¡± but you don¡¯t see the fan blades and he doesn¡¯t have the 48¡± ?? Steve Stephen J Kutash
203 906-5116 (Cell)
|
No fan caps, but I have a dozen of these. They measure 25"-26" dia. over the blades.
Want them? Tommy
I¡¯m looking for 36¡± & 48¡± cap top fans with good detail BTS has the brass 36¡± but you don¡¯t see the fan blades and he doesn¡¯t have the 48¡± ?? Steve Stephen J Kutash
203 906-5116 (Cell)
|
toggle quoted message
Show quoted text
No fan caps, but I have a dozen of these. They measure 25"-26" dia. over the blades.
Want them? Tommy
I¡¯m looking for 36¡± & 48¡± cap top fans with good detail BTS has the brass 36¡± but you don¡¯t see the fan blades and he doesn¡¯t have the 48¡± ?? Steve Stephen J Kutash
203 906-5116 (Cell)
|
Tom, I¡¯m starting on a EMD FL9. Pretty specific on the size. I¡¯m going to follow Dan Vandermause¡¯s guidelines in converting a couple of brown undecorated old American Models FP7 shells. I found I had two shells sitting on my shelf from two different friends the FP7 is about 5¡¯ too short so I need to add about 5¡¯. I appreciate it Tommy but the sizes are pretty specific. This is a project I¡¯ll work around as I build a layout. I don¡¯t have a huge space, but I just had someone come to work up an estimate on a drop ceiling. I just framed and primed the room. I¡¯ll be painting the walls pale blue and my friend is a professional artist and he¡¯ll spay some clouds for me.? Thanks again.? Stephen J Kutash
203 906-5116 (Cell)
No fan caps, but I have a dozen of these. They measure 25"-26" dia. over the blades.
Want them? Tommy
I¡¯m looking for 36¡± & 48¡± cap top fans with good detail BTS has the brass 36¡± but you don¡¯t see the fan blades and he doesn¡¯t have the 48¡± ?? Steve Stephen J Kutash
203 906-5116 (Cell)
|
Tom. I just saw the pictures. Yes I can use these.? Stephen J Kutash
203 906-5116 (Cell)
On Sat, Feb 8, 2025 at 5:37?PM Stephen Kutash < sjkutash@...> wrote: Tom, I¡¯m starting on a EMD FL9. Pretty specific on the size. I¡¯m going to follow Dan Vandermause¡¯s guidelines in converting a couple of brown undecorated old American Models FP7 shells. I found I had two shells sitting on my shelf from two different friends the FP7 is about 5¡¯ too short so I need to add about 5¡¯. I appreciate it Tommy but the sizes are pretty specific. This is a project I¡¯ll work around as I build a layout. I don¡¯t have a huge space, but I just had someone come to work up an estimate on a drop ceiling. I just framed and primed the room. I¡¯ll be painting the walls pale blue and my friend is a professional artist and he¡¯ll spay some clouds for me.? Thanks again.? Stephen J Kutash
203 906-5116 (Cell)
No fan caps, but I have a dozen of these. They measure 25"-26" dia. over the blades.
Want them? Tommy
I¡¯m looking for 36¡± & 48¡± cap top fans with good detail BTS has the brass 36¡± but you don¡¯t see the fan blades and he doesn¡¯t have the 48¡± ?? Steve Stephen J Kutash
203 906-5116 (Cell)
|
?"BTS has the brass 36¡± but ... he doesn¡¯t have the 48¡±?? A suitable O scale 36" fan will measure out to 48" in S scale. Stan Stokrocki
|
Thanks Stan! Stephen J Kutash
203 906-5116 (Cell)
On Sat, Feb 8, 2025 at 10:01?PM Stan Stokrocki via <sscalerr= [email protected]> wrote: ?"BTS has the brass 36¡± but ... he doesn¡¯t have the 48¡±?? A suitable O scale 36" fan will measure out to 48" in S scale. Stan Stokrocki
|
I designed these fans for the GP35 copied from a GP38-2. How many do you want? ? Thank You,
Bill Lane
Modeling the Mighty Pennsy, PRSL & Reading in 1957 in S Scale since 1987
See my finished models at:
Look at what has been made in PRR in S Scale! ? See my layout progress at:
Join the Pennsylvania Reading Seashore Lines Historical Society
It's FREE to join!??
Preserving The Memory Of The PRSL
?
|
On 2/8/2025 10:01 PM, Stan Stokrocki
via groups.io wrote:
?"BTS has the brass 36¡± but ... he doesn¡¯t have the
48¡±??
A suitable O scale 36" fan will measure out to 48" in S
scale.
(snip)
OR you can get the B.T.S.? 48" cap top fans.??? It has
always been listed as the DB fan since when it was created, all the
parts for the F-units and the 48" fan was only used for DB.?? It
wasn't until later that the GPs came out.??
02005 DYNAMIC BRAKE FAN, 48" EMD PKG (1) $ 3.75
Take care
Bill
--
== Author of Military Crime Fiction ==
Amazon Page -
Fair Winds of Death
Fair Winds of Deceit
Fair Winds of Doubt
== Scale Model Railroad Products ==
== Manufacturer - Retailer - Importer ==
Bill Wade
B.T.S.
1782 Trinity Rd
Belington, WV 26250-7621
Phone: 304-823-3729
Fair Winds Always!
|
Bill Wade let me know he has the 48¡± fan I¡¯m looking for but he no longer has the 36¡± cap top fans. Does anyone have (3) BTS 36¡± cap top fans they¡¯re willing to part with? Steve Stephen J Kutash
203 906-5116 (Cell)
On 2/8/2025 10:01 PM, Stan Stokrocki
via wrote:
?"BTS has the brass 36¡± but ... he doesn¡¯t have the
48¡±??
A suitable O scale 36" fan will measure out to 48" in S
scale.
(snip)
OR you can get the B.T.S.? 48" cap top fans.??? It has
always been listed as the DB fan since when it was created, all the
parts for the F-units and the 48" fan was only used for DB.?? It
wasn't until later that the GPs came out.??
02005 DYNAMIC BRAKE FAN, 48" EMD PKG (1) $ 3.75
Take care
Bill
--
== Author of Military Crime Fiction ==
Amazon Page -
Fair Winds of Death
Fair Winds of Deceit
Fair Winds of Doubt
== Scale Model Railroad Products ==
== Manufacturer - Retailer - Importer ==
Bill Wade
B.T.S.
Phone: 304-823-3729
Fair Winds Always!
|
Steve,
If you're looking for a 36" cap fan with a lot of detail consider a Cannon & Company DF-2864. It's a few thousand of an inch undersized but it shouldn't be observable and the detail is phenomenal. Mike, Ohio
Bill Wade let me know he has the 48¡± fan I¡¯m looking for but he no longer has the 36¡± cap top fans. Does anyone have (3) BTS 36¡± cap top fans they¡¯re willing to part with? Steve Stephen J Kutash
203 906-5116 (Cell)
On 2/8/2025 10:01 PM, Stan Stokrocki
via wrote:
?"BTS has the brass 36¡± but ... he doesn¡¯t have the
48¡±??
A suitable O scale 36" fan will measure out to 48" in S
scale.
(snip)
OR you can get the B.T.S.? 48" cap top fans.??? It has
always been listed as the DB fan since when it was created, all the
parts for the F-units and the 48" fan was only used for DB.?? It
wasn't until later that the GPs came out.??
02005 DYNAMIC BRAKE FAN, 48" EMD PKG (1) $ 3.75
Take care
Bill
--
== Author of Military Crime Fiction ==
Amazon Page -
Fair Winds of Death
Fair Winds of Deceit
Fair Winds of Doubt
== Scale Model Railroad Products ==
== Manufacturer - Retailer - Importer ==
Bill Wade
B.T.S.
Phone: 304-823-3729
Fair Winds Always!
|
Sorry the number I quoted in the text was wrong - use the number in the attached picture.
Steve,
If you're looking for a 36" cap fan with a lot of detail consider a Cannon & Company DF-2864. It's a few thousand of an inch undersized but it shouldn't be observable and the detail is phenomenal. Mike, Ohio
Bill Wade let me know he has the 48¡± fan I¡¯m looking for but he no longer has the 36¡± cap top fans. Does anyone have (3) BTS 36¡± cap top fans they¡¯re willing to part with? Steve Stephen J Kutash
203 906-5116 (Cell)
On 2/8/2025 10:01 PM, Stan Stokrocki
via wrote:
?"BTS has the brass 36¡± but ... he doesn¡¯t have the
48¡±??
A suitable O scale 36" fan will measure out to 48" in S
scale.
(snip)
OR you can get the B.T.S.? 48" cap top fans.??? It has
always been listed as the DB fan since when it was created, all the
parts for the F-units and the 48" fan was only used for DB.?? It
wasn't until later that the GPs came out.??
02005 DYNAMIC BRAKE FAN, 48" EMD PKG (1) $ 3.75
Take care
Bill
--
== Author of Military Crime Fiction ==
Amazon Page -
Fair Winds of Death
Fair Winds of Deceit
Fair Winds of Doubt
== Scale Model Railroad Products ==
== Manufacturer - Retailer - Importer ==
Bill Wade
B.T.S.
Phone: 304-823-3729
Fair Winds Always!
|
Thank you Stephen J Kutash
203 906-5116 (Cell)
On Sun, Feb 9, 2025 at 4:08?PM Michael Lytle via <bnomike280= [email protected]> wrote: Sorry the number I quoted in the text was wrong - use the number in the attached picture.
Steve,
If you're looking for a 36" cap fan with a lot of detail consider a Cannon & Company DF-2864. It's a few thousand of an inch undersized but it shouldn't be observable and the detail is phenomenal. Mike, Ohio
Bill Wade let me know he has the 48¡± fan I¡¯m looking for but he no longer has the 36¡± cap top fans. Does anyone have (3) BTS 36¡± cap top fans they¡¯re willing to part with? Steve Stephen J Kutash
203 906-5116 (Cell)
On 2/8/2025 10:01 PM, Stan Stokrocki
via wrote:
?"BTS has the brass 36¡± but ... he doesn¡¯t have the
48¡±??
A suitable O scale 36" fan will measure out to 48" in S
scale.
(snip)
OR you can get the B.T.S.? 48" cap top fans.??? It has
always been listed as the DB fan since when it was created, all the
parts for the F-units and the 48" fan was only used for DB.?? It
wasn't until later that the GPs came out.??
02005 DYNAMIC BRAKE FAN, 48" EMD PKG (1) $ 3.75
Take care
Bill
--
== Author of Military Crime Fiction ==
Amazon Page -
Fair Winds of Death
Fair Winds of Deceit
Fair Winds of Doubt
== Scale Model Railroad Products ==
== Manufacturer - Retailer - Importer ==
Bill Wade
B.T.S.
Phone: 304-823-3729
Fair Winds Always!
|
Another option is the American Models E8/9 36 inch fans. ?If you can find them they are nice.
toggle quoted message
Show quoted text
On Feb 9, 2025, at 4:14 PM, Stephen Kutash via groups.io <sjkutash@...> wrote:
? Thank you Stephen J Kutash
203 906-5116 (Cell)
On Sun, Feb 9, 2025 at 4:08?PM Michael Lytle via <bnomike280= [email protected]> wrote: Sorry the number I quoted in the text was wrong - use the number in the attached picture.
Steve,
If you're looking for a 36" cap fan with a lot of detail consider a Cannon & Company DF-2864. It's a few thousand of an inch undersized but it shouldn't be observable and the detail is phenomenal. Mike, Ohio
Bill Wade let me know he has the 48¡± fan I¡¯m looking for but he no longer has the 36¡± cap top fans. Does anyone have (3) BTS 36¡± cap top fans they¡¯re willing to part with? Steve Stephen J Kutash
203 906-5116 (Cell)
On 2/8/2025 10:01 PM, Stan Stokrocki
via wrote:
?"BTS has the brass 36¡± but ... he doesn¡¯t have the
48¡±??
A suitable O scale 36" fan will measure out to 48" in S
scale.
(snip)
OR you can get the B.T.S.? 48" cap top fans.??? It has
always been listed as the DB fan since when it was created, all the
parts for the F-units and the 48" fan was only used for DB.?? It
wasn't until later that the GPs came out.??
02005 DYNAMIC BRAKE FAN, 48" EMD PKG (1) $ 3.75
Take care
Bill
--
== Author of Military Crime Fiction ==
Amazon Page -
Fair Winds of Death
Fair Winds of Deceit
Fair Winds of Doubt
== Scale Model Railroad Products ==
== Manufacturer - Retailer - Importer ==
Bill Wade
B.T.S.
Phone: 304-823-3729
Fair Winds Always!
|
Stephen
?
I hope you'll consider taking notes, pictures, etc. of this project and share 'em here.
?
This kind of "How I Did It" type stuff is always a good read and inspirational, too!
?
Mark in Oregon
|
Steve: after you've completed the FL9... Stan Stokrocki
|
Gosh. Just when you thought those things couldn't get any uglier... Jamie Bothwell Who is generally ok with the New Haven in Bethlehem, PA
On Fri, Feb 21, 2025 at 3:10?PM Stan Stokrocki via <sscalerr= [email protected]> wrote: Steve: after you've completed the FL9... Stan Stokrocki
|
Hey, the green with gold is classic! At least it isn't McGinnis.
Pieter Roos
On Friday, February 21, 2025 at 03:36:01 PM EST, Jamie Bothwell via groups.io <jamie.bothwell610@...> wrote:
Gosh. Just when you thought those things couldn't get any uglier... Jamie Bothwell Who is generally ok with the New Haven in Bethlehem, PA
On Fri, Feb 21, 2025 at 3:10?PM Stan Stokrocki via <sscalerr= [email protected]> wrote: Steve: after you've completed the FL9... Stan Stokrocki
|
I know Jamie doesn¡¯t like it but I do like the nod to the green and gold! Stephen J Kutash
203 906-5116 (Cell)
On Fri, Feb 21, 2025 at 3:10?PM Stan Stokrocki via <sscalerr= [email protected]> wrote: Steve: after you've completed the FL9... Stan Stokrocki
|
Put a couple of pods below the footpath and it's a ringer for a Star Trek shuttle Jamie!?! Tommy
On Fri, Feb 21, 2025, 2:36?PM Jamie Bothwell via <jamie.bothwell610= [email protected]> wrote: Gosh. Just when you thought those things couldn't get any uglier... Jamie Bothwell Who is generally ok with the New Haven in Bethlehem, PA
On Fri, Feb 21, 2025 at 3:10?PM Stan Stokrocki via <sscalerr= [email protected]> wrote: Steve: after you've completed the FL9... Stan Stokrocki
|
Tom Lennon
Bill Lane
Mark Mugnai
