开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. RigExpert-Family
  2. Messages
Expanded Topics Messages Polls
Date
Re: Self test Error codes

 

I understand, could connecting it to a computer do the same thing?
I guess anything is possible.
N2OG Scott?

On Thu, Feb 25, 2021 at 3:25 PM Alex RigExpert via <support=[email protected]> wrote:
If the antenna is not a closed system (dipole, GP, Yagi, etc.), then a charge of static electricity may accumulate on the antenna. When the cable is connected to the analyzer, a high voltage current will flow through the analyzer's measuring bridge elements and cause damage.
The picture shows an example of burnt-out resistors.

?
Always short-circuit the connector pins on the cable before connecting to the analyzer for a few seconds.
This neutralizes static electricity and prevents damage to the analyzer.
Re: Self test Error codes

 

If the antenna is not a closed system (dipole, GP, Yagi, etc.), then a charge of static electricity may accumulate on the antenna. When the cable is connected to the analyzer, a high voltage current will flow through the analyzer's measuring bridge elements and cause damage.
The picture shows an example of burnt-out resistors.

?
Always short-circuit the connector pins on the cable before connecting to the analyzer for a few seconds.
This neutralizes static electricity and prevents damage to the analyzer.
Re: Self test Error codes

 

Ok, ?

Would that likely be caused by operator error! Or a procedure not followed??? I don’t want this to happen again.

N2OG Scott?


On Thu, Feb 25, 2021 at 2:36 PM Alex RigExpert via <support=[email protected]> wrote:
Scott,
?
In this case, there is a high probability of analyzer breakdown - damage by static discharge to the measuring bridge elements (SMD resistors and microchips).
?
You can contact one of the partner service centers:?
Or try to repair the analyzer yourself, the circuit is publicly available.
?
Alex
Re: Self test Error codes

 

Scott,
?
In this case, there is a high probability of analyzer breakdown - damage by static discharge to the measuring bridge elements (SMD resistors and microchips).
?
You can contact one of the partner service centers:?
Or try to repair the analyzer yourself, the circuit is publicly available.
?
Alex
Re: Self test Error codes

 


Hi Alex,

That is correct.? It does not want to measure SWR direct or via AntScope.?

Thanks for the reply?
N2OG Scott?

On Thu, Feb 25, 2021 at 1:25 PM Alex RigExpert via <support=[email protected]> wrote:
Hi Scott,
?
Did I understand you correctly that earlier everything was OK with the analyzer, but now the analyzer doesn't measure correctly?
?
Best regards, Alex
Re: Self test Error codes

 

Hi Scott,
?
Did I understand you correctly that earlier everything was OK with the analyzer, but now the analyzer doesn't measure correctly?
?
Best regards, Alex
Self test Error codes

 

Hi,

I am running portable now away from home. I am not getting useable reading from my AA-230 zoom.?

Self test shows error code 33 on the first test and error code 101 on the second and my 50 ohms resistor is at home.

can you help, I have my laptop with AntScope installed. Unit has worked well in the past.

thanks N2OG Scott?
For owners of AA-55 Zoom BC. Beta test. #AA-55-ZOOM #software

 

Dear friends!
?
Information for owners of analyzers AA-55 Zoom with Bluetooth Classic.
We invite you to become participants in beta testing of the new firmware as well as the new AntScope software.
It's no secret that the AA-55 Zoom BC has a much lower measurement speed through Bluetooth compared to the USB connection.
Our engineers have rethought the data transfer protocol and now the speeds are equal. The maximum range of the Bluetooth connection was also slightly increased.
?
To participate in testing you will need:
- FlashTool 15, you can download it here:?
?
Please write all your comments and suggestions here.
?
Best Regards, Alex
Re: unable to install drivers

Larry Stowell K1ZW
 

Thank you Alex
As always great job

73 Larry K1ZW
Re: unable to install drivers

 

To Larry.
?
Download and install the drivers from this link:?
I think everything will work well after that.
?
To Richard.
?
The Stick 230 analyzer does not need any drivers. This analyzer works as an HID device and does not create a serial port.
Re: unable to install drivers

Larry Stowell K1ZW
 

Alex
00458
Thanks for getting back to me
"Wonderful? Windows" yuck?
73 Larry K1ZW
Re: unable to install drivers

 

开云体育

I have a win 10? -64 and my 230 rig stick works with mine.? I updated it twice.

Kb3YRC

USA

?

From: [email protected] [mailto:[email protected]] On Behalf Of Larry Stowell K1ZW
Sent: Saturday, February 20, 2021 2:13 PM
To: [email protected]
Subject: [RigExpert Family] unable to install drivers

?

I have a new windows 10 home 64 bit. I plug in the usb cable and it installs under
other devices as 230zoom with an error triangle under properties its says drivers not installed code 28

any ideas?
73 Larry K1ZW?

Re: unable to install drivers

 

Hi Larry,
?
Please tell me the serial number of your analyzer.
?
Regards, Alex
unable to install drivers

Larry Stowell K1ZW
 

I have a new windows 10 home 64 bit. I plug in the usb cable and it installs under
other devices as 230zoom with an error triangle under properties its says drivers not installed code 28

any ideas?
73 Larry K1ZW?
Re: For AA-600 owners #aa-600 #firmware

 

Update.
Now test firmware is also available for the and .
We also expanded the purely simultaneously displayed screenshots to 6.?Now, this process is handled by a special backend script in Python.
For AA-600 owners #aa-600 #firmware

 

Dear friends!
?
I invite the owners of the AA-600 analyzers to take part in the experiment.
We are testing a new function for creating, transferring, and storing screenshots of measurement results in Rig Expert analyzers.
The main idea is as follows:
- after measuring one of the modes (SWR, RL, RX, Smith chart), press the hot buttons to generate a special QR code on the analyzer screen.
- scan the code with your smartphone
- QR code contains a web link to the rigexpert.com website
- the measurement results are encrypted in the link
- having received the encrypted parameters, javascript converts the data into a graph and displays it on the smartphone screen.
?
Then you can save these charts.
In the future, we plan to expand the possibilities for saving charts (for example, share the results on Facebook or Telegram, save the results in the personal account of my.rigexpert).

You can download the test firmware from this link:?https://rigexpert.com/files/firmware/aa600qr_418.zip
Important! only English menu language will be available.
?
To go back, download the firmware here:
international:?https://rigexpert.com/files/firmware/aa600_416.zip
European:
American:?https://rigexpert.com/files/firmware/aa600us_416.zip
?
I would be grateful to everyone for your comments and suggestions.
?
Best Regards, Alex
Re: Love Mine

 

开云体育

Hi, Richard.

For Stick 230 latest firmware version - 1.8
There are no updates.

Best regards, Alex Antonov

11.02.2021 1:03, Richard Lenker KB3YRC пише:

I love my Rig stick 220? ??any updates after ver 1.8??

?

Richard? Lenker Pennsylvania ?USA

?
Love Mine

 

开云体育

I love my Rig stick 220? ??any updates after ver 1.8??

?

Richard? Lenker Pennsylvania ?USA

?
Re: AA-30.Zero and Arduino #antscope2 #software

Alain Reiner
 

开云体育

You can find the program in the file directory :

/g/RigExpert-Family/files/Other%20software

Alain, F4HFS

Le 10/02/2021 à 22:54, Alain Reiner a écrit?:

Hello,

1) you do not need an arduino to use your AA30 Zero. You can connect it to a PC using an FTDI232 USB interface.

2) I wrote a programm that you can use on a PC with your AA30 Zero. it's quite good and the cost is like the AA30 : zero :) ! let me know if you are interested.

I could help you to get it working.

By the way, who are you ?

Best 73's,
Alain Reiner, F4HFS


Le 09/02/2021 à 12:16, Alex RigExpert via groups.io a écrit?:

Hi!

There is no version of AntScope2 for Arduino. Since Arduino doesn't contain any operating system.

If you mean the possibility of joint operation of AA-30 zero + Arduino + color TFT display with touch control, then at the moment there are no ready-made solutions.

Best regards, Alex

08.02.2021 19:15, orkunsan@... пишет:
Hi, I have your lovely device AA-30.zero.
There are windows, macOS, ubuntu and raspberry pi4 versions.
Will be there Antscope2 version for Arduino work with nextion hmi, or another Mcufriend TFT??
I'm looking forward..
Thank you.


Re: AA-30.Zero and Arduino #antscope2 #software

Alain Reiner
 

开云体育

Hello,

1) you do not need an arduino to use your AA30 Zero. You can connect it to a PC using an FTDI232 USB interface.

2) I wrote a programm that you can use on a PC with your AA30 Zero. it's quite good and the cost is like the AA30 : zero :) ! let me know if you are interested.

I could help you to get it working.

By the way, who are you ?

Best 73's,
Alain Reiner, F4HFS


Le 09/02/2021 à 12:16, Alex RigExpert via groups.io a écrit?:

Hi!

There is no version of AntScope2 for Arduino. Since Arduino doesn't contain any operating system.

If you mean the possibility of joint operation of AA-30 zero + Arduino + color TFT display with touch control, then at the moment there are no ready-made solutions.

Best regards, Alex

08.02.2021 19:15, orkunsan@... пишет:
Hi, I have your lovely device AA-30.zero.
There are windows, macOS, ubuntu and raspberry pi4 versions.
Will be there Antscope2 version for Arduino work with nextion hmi, or another Mcufriend TFT??
I'm looking forward..
Thank you.

601 - 620 of 1140