开云体育

Good evening all. I just received my AA55 Zoom and I'm getting the hang of it. My issue is I have one coax and two dipoles a 30m and 40m on it. on my external radio meter and on my radio with no tuner

Done Sent: Tuesday, April 20, 2021 4:24 PM To: [email protected] Subject: Re: [RigExpert Family] 1.9 on my stick New firmware 1.10 was released yesterday Relevant for residents of ITU3

New firmware 1.10 was released yesterday Relevant for residents of ITU3 region. 20.04.2021 23:08, Richard Lenker KB3YRC пишет:

TKS Sent: Sunday, April 18, 2021 5:45 PM To: [email protected] Cc: Sergei Litvinov; Ashot Andreev Subject: Re: [RigExpert Family] 1.9 on my stick Hi, Richard, You can find out what's new in

Hi, Richard, You can find out what's new in the firmware by clicking on the "*More info*" link: /Best Regards, Alex/ 18.04.2021 03:17, Richard Lenker KB3YRC пишет:

Just updated my Rig Stick 230 to 1.9 Freeware what were the changes ? Richard

Alex, I tried this with three loads, one of which was connected direct to the analyser as well as with a patch lead.? The other two using a patch lead.? Here are photos of the loads used. I'm not

Chris, thanks for the photo. All these loads are not suitable. It is necessary to use a low-power load (no more than 1 watt) connected directly to the analyzer without cables and adapters. In fact,

Dear Chris, Most likely you are using a load that is not suitable for the test. Can you make and show me a photo of the load? Regards, Alex

I have a new AA-230 Zoom - two days out of the box. When I run the Self Test from the Tools menu the analyser passes test one and test two but on test 3, with a 50 ohm load, the self test fails with

When I click on "print" the app locks up until I delete the icon from the command line. I used to be able to print from the "zero," but no longer can.

Ok, thanks, that seems pretty obvious and thought I tried that. Will give it another shot.

Use the *Left Arrow* and *Right Arrow* buttons to move the cursor. /Regards, Alex/ 31.03.2021 17:17, S S пишет:

How does one get control and ability to move the upper triangle on the AA-35 Zoom so that the readings along the curve can be read? The image is from the manual on pg. 7.

Hi, after my tests the added library overhead is negligible. Infact it does the same serial commnuication as suggested... Furthermore the ZERO is really too slow for this application. I think my only

Good morning, dear friends. Please see our time-plan: A. All bugs described below will be fixed until April, 7: ( negative range ( /g/RigExpert-Family/message/551 ) )

Changing the reference impedance on the instrument or in PC client software is a mathematical transformation. It does not change the physical directional coupler circuit or the AD conversion process.

Hi Ken, Alex got in touch with me and we cleared up the issue with video and I was able to view it. I did not set a frequency range because I thought Antscope did that automatically based on the data

Hi guys. This week we will announce time-plan for fixing the Bluetooth connectivity bugs. And also for bugs mentioned here in this topic. Please be patient.

FWIW, I can view the video no problem. Evan, have you set an appropriate frequency range in the upper right corner?