开云体育

Hi Rick, Thank you for the input. Note I am looking at a copy of your "Unofficial User Manual" and it has been very useful clarifying many questions. I unpaired the device per your suggestion. Still

Sorry, I meant “since you guys are no longer in the EU” - of course you are in the UK. (hi) ============================================================= Gordon, I had an issue with my AA-54 and

Gordon, I had an issue with my AA-54 and sent it to Slovania for repair. Very quick turn-around. Since you guys are no longer in the UK, contact Moonraker. They are the local service point for the

Hi Ken, My AA-230 ZOOM works fine with my Google Pixel 6A telephone running Android 12 and also Android 13. Hopefully it’s a setup issue with yours and not something broken. I assume you have turned

hello, i have noticed that the calibration does not seem to be "global" on the aa600. For instance, if I calibrate The #5 graph and use the F1 to read it , all is fine. However, if the "ALL" function"

Flashed my new AA-2000 from v1.9 to 2.2 on Win10: Had to try several times. The following order of steps seemed to work. 1) Run Flash Tool as Administrator. 2) Turn on RigExpert Analyzer. 3) Connect

Sorry for 2 previous incomplete messages. I think I found the enter key on the numeric keyboard actually sends the email when I wanted a carriage return. I will not press it again. I think I zapped my

Sorry, I mistakenly sent a previous message in error before I was finished. My trusty AA230 Zoom has become faulty likely due to strong RF. All 3 tests fail: Test 1:

My trusty AA230 Zoom has developed faults in the presence of RF I believe and is now giving incorrect results. It failed self test 1, 2 , and 3 although I think 3 always fails as I was using wrong

I can calibrate the analyzer on the #5 scan graph function and interrogate it with F1 and the data agrees with the scan. However, if I use the "ALL" function, I get an uncalibrated result. The SWR

I am unable to connect using Bluetooth with my Samsung Galaxy A52 Samsung: Android V12 App: AntScope from Google Play Store Latest Paired Device: AA-230 Zoom 04074 AA-230 Zoom BLE Firmware version

I just have enough coax to put a connector on ~5ft. I don't know what the "correction"factor is, I did put the velocity factor in as 82%

It all depends first on whether the correction factor is correct. I am confused over the 19 ft before the start. Are you running a 15 foot length into the spool? I have used the AA-600 and it reports

I have an unknown length of Davis Bury-Flex on a Spool and need about 100ft. I have the settings for the Vol factor (82%) and ran the TDR. It starts at 14.9ft at the center its 127ft and at the end

I have replaced all 7 bridge resistors as well as the ADG779 switch.? Unit still fails self tests and reports error 35,error 103 and error 255 respectively for the three self tests.? What do these

Alex, Flashtool works well! I downloaded it, ran it, and updated my AA-650 Zoom... Nicely done sir! 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist,

This is for the AA-230 ZOOM BLUE TOOTH , not for the AA-230 ZOOM. Best 73’s DE Nick SV1VS Sent: Wednesday, 16 November, 2022 05:47 To: [email protected] Subject: Re: [RigExpert Family] Just

Revision History ( https://rigexpert.com/files/firmware/aa230zoom/rev_2/latest/info.txt )

Mike, do you have an AA-230 or the newer AA-230 ZOOM. For the zoom, the revision history was in a text file at the same location where I downloaded the firmware. 73 - Rick, DJ0IP (Nr. Frankfurt,

What is the revision history between 1.119 and 1.120. Really like my AA-230 Mike W9RE