开云体育

I understand, could connecting it to a computer do the same thing? I guess anything is possible. N2OG Scott [email protected]> wrote:

If the antenna is not a closed system (dipole, GP, Yagi, etc.), then a charge of static electricity may accumulate on the antenna. When the cable is connected to the analyzer, a high voltage current

Ok, Would that likely be caused by operator error! Or a procedure not followed?? I don’t want this to happen again. N2OG Scott [email protected]> wrote:

Scott, In this case, there is a high probability of analyzer breakdown - damage by static discharge to the measuring bridge elements (SMD resistors and microchips). You can contact one of the partner

Hi Alex, That is correct. It does not want to measure SWR direct or via AntScope. Thanks for the reply N2OG Scott [email protected]> wrote:

Hi Scott, Did I understand you correctly that earlier everything was OK with the analyzer, but now the analyzer doesn't measure correctly? Best regards, Alex

Hi, I am running portable now away from home. I am not getting useable reading from my AA-230 zoom. Self test shows error code 33 on the first test and error code 101 on the second and my 50 ohms

Dear friends! Information for owners of analyzers AA-55 Zoom with Bluetooth Classic. We invite you to become participants in beta testing of the new firmware as well as the new AntScope software. It's

Thank you Alex As always great job 73 Larry K1ZW

*To Larry.* Download and install the drivers from this link: https://www.ftdichip.com/Drivers/CDM/CDM21228_Setup.zip I think everything will work well after that. *To Richard.* The Stick 230 analyzer

Alex 00458 Thanks for getting back to me "Wonderful? Windows" yuck 73 Larry K1ZW

I have a win 10 -64 and my 230 rig stick works with mine. I updated it twice. Kb3YRC USA Sent: Saturday, February 20, 2021 2:13 PM To: [email protected] Subject: [RigExpert Family] unable to

Hi Larry, Please tell me the serial number of your analyzer. Regards, Alex

I have a new windows 10 home 64 bit. I plug in the usb cable and it installs under other devices as 230zoom with an error triangle under properties its says drivers not installed code 28 any ideas? 73

Update. Now test firmware is also available for the AA-1000 ( https://rigexpert.com/files/firmware/aa1000qr_418.zip ) and AA-1400 ( https://rigexpert.com/files/firmware/aa1400qr_418.zip ). We also

Dear friends! I invite the owners of the AA-600 analyzers to take part in the experiment. We are testing a new function for creating, transferring, and storing screenshots of measurement results in

Hi, Richard. For Stick 230 latest firmware version - 1.8 There are no updates. /Best regards, Alex Antonov/ 11.02.2021 1:03, Richard Lenker KB3YRC пише:

I love my Rig stick 220 any updates after ver 1.8? Richard Lenker Pennsylvania USA

You can find the program in the file directory : /g/RigExpert-Family/files/Other%20software Alain, F4HFS

Hello, 1) you do not need an arduino to use your AA30 Zero. You can connect it to a PC using an FTDI232 USB interface. 2) I wrote a programm that you can use on a PC with your AA30 Zero. it's quite