开云体育

I have the AA-520 and it was working great with antscope (not antscope2) on my Win 10 until Sep 3 when an update was pushed down. Now when I connect the 520 to the pc, antscope finds the 520 on com

Thanks much, Alex and Mike. Very helpful.

Bill, there are are some major differences. 1 - The AA-230 zoom has a smaller hand held format while retaining a visually equal size screen. This makes it even better for go-box and portable

Dear Bill, Indeed, the AA-230 Zoom analyzer was released earlier than the AA-35 and 55 analyzers. In fact, the difference between these analyzers is not big and only concerns the size of analyzer, the

At one time, perhaps even now, the TDR function (fault detection) was better with the AA-230 Zoom. That may have improved with firmware updates but the 55 MHz maximum output frequency is a limiting

I am wondering if there is any significant difference between the 55 and the 230 apart from the frequency range? The 230 manual was first copyrighted in 2015 and the 55 in 2016, so I assume the 55 is

I can't seem to get the app to work on Windows 7 or 10.

Paul, thanks. I am subscribed to David's channel but have not had time to watch his new video yet. As I said, RigExpert analyzers do not have a built-in frequency counter function. Personally, I can

Alex - here's the link https://www.youtube.com/watch?v=j5sbY6JKU2w&list=PL0R9jy9LZw_3CHCH-5A8faeIA-H3e4ZNC&index=70 It's at the 15 minute mark in the video 73 Paul

Hello Paul, Can you give me a link to the video? In general, the analyzer is not designed to work as a frequency meter. An RF signal of more than +25 dBm cannot be applied to the analyzer input for a

I saw a video last night where the basic MFJ ant analyzer was being used to measure frequency. I have a rig Expert AA-55 Zoom and was wondering whether it could be used to measure frequency. Poor

I just put my 80mtr dipole up and ran some swr curves. I used both 1.0 and 2.0 1.0 min swr 3.757 1.12 2.0 min swr 3.825 4.0 !!! Whats up no changes just shut one down and brought the other up?? 73

Hello all, Been using the Rig Expert Plus for a couple years on different rigs for CW. Currently using it with an FTDX-9000D on CW and trying to set it up for digital with N1MM+ and MMTTY. Have it

Dear Dino! You made me blush :) To all: at the moment the calibration function doesn't work for nanoVNA analyzer in AntScope2. But we are working on it. We are also working on adding versions of H4

We had a very nice NanoVNA presentation at our Zoom club meeting recently and one of the issues the presenter made was that the Antscope2 calibration function didn’t appear to work correctly in his

AA-600 purchased from SolidSignal on Amazon back in Feb. 2020. Very little use until recently. Was working fine and without issue (NO stray RF of any sorts) when the unit died. Replaced with fresh

Dear friends! Today I received the following news from our friend William KT5TE. Perhaps for some of you it will be useful. Best Regards, Alex AntScope2 is available for Linux openSUSE platform.

Yuri, Where would I send it? Larry, KN8N

Hello Larry, Seems like your USB Hub chip AT43301 gone south because of static discharge. We may repair it for you. Regards, Yuri Onipko N2WCQ / VE3DZ RigExpert USA and Canada, Inc.

My computer can no longer see my RigExpert TI-5. The other evening, my computer was powered up as I had forgotten to shut it down. We had a lightning storm come through and now the Rig-Expert can no