Frank,
Now everything is clear to me.
You just didn't save anything in the analyzer's memory.
When an attempt is made to load "nothing" from the analyzer's
memory, the program simply "goes crazy".
Save the measurement result to the analyzer's memory and try
again.
Regards, Alex
26.11.2020 20:06, Frank Howell §á§Ú§ê§Ö:
toggle quoted message
Show quoted text
Alex,
I¡¯ve installed version 1.1.4 and it does identify the 230
Stick and Version 1.1.4, does a sweep as expected. It will
retrieve a screenshot from the AA as per the menu and will
Export as CSV the Freq, R and L as a test case to verify that
it¡¯s getting data from the 230 Stick. I checked the contents and
the CSV file has full integrity.?
However, when I execute the tab to extract the data from the
AA, it opens a dialog box (shown attached) and appears to not
have any retrieved data elements. Should it? I wait for 30 or so
seconds without any listing. There¡¯s an ok box which just closes
this dialog. The ReadandSaveAll button will bring up another
dialog box, ¡°Reading data¡±. It will appear to be reading data
from the device but suddenly crash AS2.
Frank
Alex RigExpert