开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

PiGate RMS Documentation ?


 

Hello Everyone,

The??page has a link to a file named PiGate_RMS_2.0.docx? ().? When I click the link I get a "can't reach this page" response.

Can anyone tell me how to access this file, or point me to an alternate source?

Bob, KO2F


 

Morning,


Punching the document into google gave me a live link of?



De k7mhi, check out my Qrz page for more pi-Linux tools :)?

kelly


 

I've attached the docs here (if attachments are possible).


 

Thank you Michael!

Bob, KO2F


Mark Griffith
 

All,

I apologize for the inconvenience.

I was diagnosed with kidney cancer a few weeks ago, and had surgery to remove the offending kidney and cancer growth last Tuesday.? Unfortunately for me, my contract with the file download site I was using for the PiGate project expired during the week I was in the hospital so all the links went inactive.

I had been experimenting with different file storage sites, but had not found one that could perform the same way the last one did before my surgery was scheduled.? I was hoping to take care of it after I was released from the hospital, but my recovery is slow.? I'm still looking for a site, but my search is slowed by my slow recovery.? This was the first time I've been able to get on the computer.? I am hoping over the next few days I will be able to make this transition, as long as I am physically able.? Eventually, it will get done.

If anyone has some suggestions on a new site to store download files, I would be eager to hear.? The only requirements are:

1. Have to be able to upload fairly large files slightly more than 2Gb
2. Each file be accessible by clicking a web link
3. No passwords or special permissions needed to grab a file
4. Not cost too much.? My last site went from a couple hundred bucks a year to over $1,200.

The total file capacity is less then 100MB.

Any help would be appreciated.

Oh, and a side note I found out today, my tumor was not cancerous, just a benign cyst.? Isn't that a kick on the head.

Mark
KD0QYN


On Sunday, April 23, 2023 at 08:26:00 AM CDT, Bob Segrest <bobs@...> wrote:


Hello Everyone,

The??page has a link to a file named PiGate_RMS_2.0.docx? ().? When I click the link I get a "can't reach this page" response.

Can anyone tell me how to access this file, or point me to an alternate source?

Bob, KO2F


 

开云体育

Myself, I use another hard drive, either in the computer case or one of those made for usb external storage. Available up to 24 terabytes storage, walmart or best buy, thus permanent storage that does not cost an arm and leg to use.

On 4/24/2023 5:23 PM, Mark Griffith via groups.io wrote:

All,

I apologize for the inconvenience.

I was diagnosed with kidney cancer a few weeks ago, and had surgery to remove the offending kidney and cancer growth last Tuesday.? Unfortunately for me, my contract with the file download site I was using for the PiGate project expired during the week I was in the hospital so all the links went inactive.

I had been experimenting with different file storage sites, but had not found one that could perform the same way the last one did before my surgery was scheduled.? I was hoping to take care of it after I was released from the hospital, but my recovery is slow.? I'm still looking for a site, but my search is slowed by my slow recovery.? This was the first time I've been able to get on the computer.? I am hoping over the next few days I will be able to make this transition, as long as I am physically able.? Eventually, it will get done.

If anyone has some suggestions on a new site to store download files, I would be eager to hear.? The only requirements are:

1. Have to be able to upload fairly large files slightly more than 2Gb
2. Each file be accessible by clicking a web link
3. No passwords or special permissions needed to grab a file
4. Not cost too much.? My last site went from a couple hundred bucks a year to over $1,200.

The total file capacity is less then 100MB.

Any help would be appreciated.

Oh, and a side note I found out today, my tumor was not cancerous, just a benign cyst.? Isn't that a kick on the head.

Mark
KD0QYN


On Sunday, April 23, 2023 at 08:26:00 AM CDT, Bob Segrest <bobs@...> wrote:


Hello Everyone,

The??page has a link to a file named PiGate_RMS_2.0.docx? ().? When I click the link I get a "can't reach this page" response.

Can anyone tell me how to access this file, or point me to an alternate source?

Bob, KO2F


 

In my experience, if it's on-site backup, it isn't backup.
--?
=Gary?AK2QJ


On Tue, Apr 25, 2023 at 12:34?AM john rader <jara8462@...> wrote:

Myself, I use another hard drive, either in the computer case or one of those made for usb external storage. Available up to 24 terabytes storage, walmart or best buy, thus permanent storage that does not cost an arm and leg to use.

On 4/24/2023 5:23 PM, Mark Griffith via wrote:
All,

I apologize for the inconvenience.

I was diagnosed with kidney cancer a few weeks ago, and had surgery to remove the offending kidney and cancer growth last Tuesday.? Unfortunately for me, my contract with the file download site I was using for the PiGate project expired during the week I was in the hospital so all the links went inactive.

I had been experimenting with different file storage sites, but had not found one that could perform the same way the last one did before my surgery was scheduled.? I was hoping to take care of it after I was released from the hospital, but my recovery is slow.? I'm still looking for a site, but my search is slowed by my slow recovery.? This was the first time I've been able to get on the computer.? I am hoping over the next few days I will be able to make this transition, as long as I am physically able.? Eventually, it will get done.

If anyone has some suggestions on a new site to store download files, I would be eager to hear.? The only requirements are:

1. Have to be able to upload fairly large files slightly more than 2Gb
2. Each file be accessible by clicking a web link
3. No passwords or special permissions needed to grab a file
4. Not cost too much.? My last site went from a couple hundred bucks a year to over $1,200.

The total file capacity is less then 100MB.

Any help would be appreciated.

Oh, and a side note I found out today, my tumor was not cancerous, just a benign cyst.? Isn't that a kick on the head.

Mark
KD0QYN


On Sunday, April 23, 2023 at 08:26:00 AM CDT, Bob Segrest <bobs@...> wrote:


Hello Everyone,

The??page has a link to a file named PiGate_RMS_2.0.docx? ().? When I click the link I get a "can't reach this page" response.

Can anyone tell me how to access this file, or point me to an alternate source?

Bob, KO2F


 

开云体育

I use a usb key that I store in my safety deposit box at the local bank…. $55 a year is cheap insurance for a backup of tax returns, original software, licensed software, documents etc.
Rich

rich clausi RC Software and Data

On Apr 28, 2023, at 11:00 AM, Gary <gary@...> wrote:

?
In my experience, if it's on-site backup, it isn't backup.
--?
=Gary?AK2QJ


On Tue, Apr 25, 2023 at 12:34?AM john rader <jara8462@...> wrote:

Myself, I use another hard drive, either in the computer case or one of those made for usb external storage. Available up to 24 terabytes storage, walmart or best buy, thus permanent storage that does not cost an arm and leg to use.

On 4/24/2023 5:23 PM, Mark Griffith via wrote:
All,

I apologize for the inconvenience.

I was diagnosed with kidney cancer a few weeks ago, and had surgery to remove the offending kidney and cancer growth last Tuesday.? Unfortunately for me, my contract with the file download site I was using for the PiGate project expired during the week I was in the hospital so all the links went inactive.

I had been experimenting with different file storage sites, but had not found one that could perform the same way the last one did before my surgery was scheduled.? I was hoping to take care of it after I was released from the hospital, but my recovery is slow.? I'm still looking for a site, but my search is slowed by my slow recovery.? This was the first time I've been able to get on the computer.? I am hoping over the next few days I will be able to make this transition, as long as I am physically able.? Eventually, it will get done.

If anyone has some suggestions on a new site to store download files, I would be eager to hear.? The only requirements are:

1. Have to be able to upload fairly large files slightly more than 2Gb
2. Each file be accessible by clicking a web link
3. No passwords or special permissions needed to grab a file
4. Not cost too much.? My last site went from a couple hundred bucks a year to over $1,200.

The total file capacity is less then 100MB.

Any help would be appreciated.

Oh, and a side note I found out today, my tumor was not cancerous, just a benign cyst.? Isn't that a kick on the head.

Mark
KD0QYN


On Sunday, April 23, 2023 at 08:26:00 AM CDT, Bob Segrest <bobs@...> wrote:


Hello Everyone,

The??page has a link to a file named PiGate_RMS_2.0.docx? ().? When I click the link I get a "can't reach this page" response.

Can anyone tell me how to access this file, or point me to an alternate source?

Bob, KO2F


 

On 2023-04-28 10:25, Gary wrote:
In my experience, if it's *on*-site backup, it isn't backup.
-- /
/=Gary AK2QJ
depends on your disaster. if the "on site" site is damaged, then it won't be a backup.


--
Charles MacDonald VA3CPY Stittsville Ontario
cmacd@... Just Beyond the Fringe
No Microsoft Products were used in sending this e-mail.


 

I was able to download the image and documentation for DRAWS Hat from the website where Mark posted it. ?
I'm always struck by the Ham Communities selfless expenditure of time, talent and treasure to make us better. The efforts of operators like Mark allow us to better serve our community.
Mark great work on an ingenious device that can help us serve our neighbors and community when disaster strikes.
Hope you fully recover quickly.
Thanks
Larry
KD2LBV
73's?


 

It's great to have the documentation but where to find TNC-Pi or something similar. It's very dissapointing to see all units have been discontinued. What are the alternatives to sending email via HF or VHF?
?
Dean/ N2TNN


 

开云体育

"What are the alternatives to sending email via HF or VHF?" ? Windows software Vara ??

On 3/2/2025 12:08 PM, Dean, N2TNN via groups.io wrote:
It's great to have the documentation but where to find TNC-Pi or something similar. It's very dissapointing to see all units have been discontinued. What are the alternatives to sending email via HF or VHF?
?
Dean/ N2TNN
-- 
Dave WB5NHL
8 band DXCC, 320 countries confirmed (Mixed , current)
Hamshack Hotline 5555


 

Kantronics still makes a traditional USB in TNC, available from RandL.com

On 02/03/2025 12:08 EST Dean, N2TNN via groups.io <n2tnn@...> wrote:


It's great to have the documentation but where to find TNC-Pi or something similar. It's very dissapointing to see all units have been discontinued. What are the alternatives to sending email via HF or VHF?

Dean/ N2TNN


 

开云体育

Hi Folks!
The Kantronics KPC-3PLUS is a solid TNC.? My only gripe with Kantronics is that they used the same radio connector as the universally available TNC-2 platform which made cabling a PIA.? Well it doesn't matter as much today, as they are the only major TNC vendor left standing.?

FYI: The TAPR-designed TNC-2 was licensed by MFJ, AEA, GLB, PAC-COMM and others.? When the initial kits were made available by TAPR, we set up a production line in my living room and dining room for eight of us to build, test and operate on a Saturday.? My wife Nancy (N2FWI)'s TNC-2 was the only one that worked the first time without debugging because she solders well and follows direction.? In all honesty the rest of us had the "disability" of having a "Y" chromosome!

;-)

73,
J. Gordon "Gordie" Beattie, Jr., W2TTT?


Get On The Air!?


From: [email protected] <[email protected]> on behalf of Nigel Gunn, G8IFF/W8IFF via groups.io <nigel@...>
Sent: Sunday, March 2, 2025 12:23:06 PM
To: [email protected] <[email protected]>; Dean, N2TNN via groups.io <N2tnn@...>
Subject: Re: [RaspberryPi-4-HamRadio] PiGate RMS Documentation ?
?
Kantronics still makes a traditional USB in TNC, available from RandL.com


> On 02/03/2025 12:08 EST Dean, N2TNN via groups.io <n2tnn@...> wrote:
>
>
> It's great to have the documentation but where to find TNC-Pi or something similar. It's very dissapointing to see all units have been discontinued. What are the alternatives to sending email via HF or VHF?
>
> Dean/ N2TNN
>






 

Does it sit on top of a Raspberry Pi 4? Like a TNC-Pi

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Nigel Gunn, G8IFF/W8IFF
Sent: Sunday, March 2, 2025 12:23 PM
To: [email protected]; Dean, N2TNN via groups.io <N2tnn@...>
Subject: Re: [RaspberryPi-4-HamRadio] PiGate RMS Documentation ?

Kantronics still makes a traditional USB in TNC, available from RandL.com


On 02/03/2025 12:08 EST Dean, N2TNN via groups.io <n2tnn@...> wrote:


It's great to have the documentation but where to find TNC-Pi or something similar. It's very dissapointing to see all units have been discontinued. What are the alternatives to sending email via HF or VHF?

Dean/ N2TNN


 

No. It's on a USB cable.

On 02/03/2025 18:09 EST Dean, N2TNN via groups.io <n2tnn@...> wrote:


Does it sit on top of a Raspberry Pi 4? Like a TNC-Pi



-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Nigel Gunn, G8IFF/W8IFF
Sent: Sunday, March 2, 2025 12:23 PM
To: [email protected]; Dean, N2TNN via groups.io <N2tnn@...>
Subject: Re: [RaspberryPi-4-HamRadio] PiGate RMS Documentation ?

Kantronics still makes a traditional USB in TNC, available from RandL.com


On 02/03/2025 12:08 EST Dean, N2TNN via groups.io <n2tnn@...> wrote:


It's great to have the documentation but where to find TNC-Pi or something similar. It's very dissapointing to see all units have been discontinued. What are the alternatives to sending email via HF or VHF?

Dean/ N2TNN







 

PiGateRMS does not depend on a specific TNC or even a TNC.? It could be an audio interface like a DRA-30.? Under the covers, PiGateRMS uses G8BPQ so you could change its config file to use a different TNC or audio device.
--
Bill AA6BD