HamPi 1.3 (March 2021) Released
|
Fellow Hams, I am pleased to announce that??is now available for public download! Please use the attached BitTorrent file to make it easier for everyone to get the image.?And after you have completed downloading, please continue to seed for at least a week so other hams can benefit. If you cannot or will not use BitTorrent, you may download HamPi from SourceForge: Direct Download Link:? If you run into issues, please post to the forum on?/g/Ham-Pi/?first. If you see a bug (defect), please report it on the GitHub issues page at:? Did you know that HamPi has a wiki? Find it at? UPGRADING: In order to transition smoothly from HamPi 1.X to HamPi 1.3 and preserve your configuration settings, please follow the instructions in the attached file, "UPGRADING_FROM_PRIOR_VERSION.TXT" CHANGELOG: Version 1.3 (March 2021) Release ==================================== Base image: Raspbian OS Buster 2021-01-11 (Full release) Added Help Menus to Desktop GUI Added SKCCLogger Added Radio Explorer Added QrssPiG Added minimodem Added update_wsjtx_log.py Updated HamLib to 4.1 Updated SDRPlay API Updated JTDX Updated SDRAngel Updated WSJT-X Many other applications updated from Internet Added patches to multiple project sources' for HamLib 4.1 internal name change. Good luck and 73! -- - Dave ?? |
|
Bob
Tnx Dave!? Appreciate the SDRPlay work.? Will download/test soonest. 73 de Bob K4RCG On Tue, Mar 23, 2021 at 9:18 PM Dave Slotter, W3DJS <slotter@...> wrote:
|
|
Dave-
Hope you enjoyed my QSL card. I wanted to upgrade WSJT-X a week or so ago and was flustered over the procedure. I am running HamPi on a Raspberry PI 400 and really enjoying it. It will become my portable station with a FT-817 and LiFePO4 batteries. Just got my BMS Battery Management System.. Good for 100 amps. Will install it in my ammo can battery pack later today. Thanks again for the dedication to your project... |
|
Thank? you so much Dave. Dimas from C¨®rdoba Argentina. Call sign: LU5HXI Ing. Dimas A. Benasulin Laboratorio de Sensores UTN - Facultad Regional C¨®rdoba dimasbenasulin@... 0351-156330044 El mi¨¦, 24 mar 2021 a las 12:05, Larry Macionski via (<am_fm_radio=[email protected]>) escribi¨®: Dave- |
|
Well, per previous post...LiFePo4 battery pack is done, while I downloaded HamPI v1.3.
afterwards, I pulled out a 32GbSD card out of my SD card /thumb drive junk box... used SDFORMATTER and WIN32DISKIMAGER and could not? cut a bootable SD card...Tried 2 times. FAT and FAT32 formats... Humm.... Time to read the read.me's Dave documents using BalenaETCHER -Oh boy, yet another SD burner to learn how to use. Good thing I have 2Tb of RAID5 disk storage to store 1 time programs. For 5 years I've been cutting my RPI SD cards on WIN32DISKMANAGER. So--- downloaded and ran it. Got a bootable SD card 1st time...So who knows, you may be able to teach a old dog new tricks. Played with HamPI v1.3 on my RPI400 connected to a Yaesu FT991A. pending a "real antenna-" been raining over a week here. I have the FT-991A on a? 40 meter ham sticks dipole at 15ft. on a vent pipe. My Test antenna. I have other rigs on other antennas. But don't want to keep moving coax connectors.? So by midnight I had the thing working and FT-8 was displaying europeans and JA's. Running 10 watts? I made my 1st FT8 contact on the FT-991 worked VE6, a WL2, W9, W4.. I really wanted to work someone PSK31 and by 00:30 local only 1 CW signal and no PSK31 on 40M.. But plenty of FT8.. So--- Dave has done a great job of packaging this--- just read the instructions. WSJT-X version does have the new mode FST4 By the way. Regards to all, Larry W8LM.. |
Dave Slotter, W3DJS
Larry Macionski
Dimas Alberto Benasulin