|
I have a new RP400 I'm trying to use with Hampi v 1.0.? Running the software that came with the computer, I have time/date updates, wifi and software updates.? Running Hampi 1.0, I don't get any of that.
I've spent several days looking for a solution without success.? I've hooked the 400 up to ethernet and can get on the web, but no luck with updates, time, or wifi.
As if I didn't have enough working against me, I'm also brand new to Linux.
?
Can anyone help?? Thanks!
?
?
?
?
|
Bill, Assuming v1 has the drivers for the 400 Wi-Fi I expect its because V1.0 defaults to being an access point. You need to disable it. Instructions are here:- ? /g/RaspberryPi-4-HamRadio/message/9549 ? V2 solves this problem. Any reason you didn’t use this? ? Dave G4UGM ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Bill Harden
Sent: 02 January 2021 18:55
To: [email protected]
Subject: [RaspberryPi-4-HamRadio] Ham Pi on Raspberry Pi 400? I have a new RP400 I'm trying to use with Hampi v 1.0.? Running the software that came with the computer, I have time/date updates, wifi and software updates.? Running Hampi 1.0, I don't get any of that. I've spent several days looking for a solution without success.? I've hooked the 400 up to ethernet and can get on the web, but no luck with updates, time, or wifi.
As if I didn't have enough working against me, I'm also brand new to Linux. Can anyone help?? Thanks!
|
Correction.? I tried V1.2 not 2.0.? I can't seem to find 2.0 on Hampi, only on its predecessor.?
On Sat, Jan 2, 2021, 12:54 PM Bill Harden < hardenwl@...> wrote: Thank you Dave.??
I tried V2 several times with two different cards and it would crash during loading.? The image was about 1/2 the size of the V1 image which made me suspicious of the file.
Can you suggest a link to a known good V2 source and I'll give it another shot?
Bill K7HAR Bill, Assuming v1 has the drivers for the 400 Wi-Fi I expect its because V1.0 defaults to being an access point. You need to disable it. Instructions are here:- ? /g/RaspberryPi-4-HamRadio/message/9549 ? V2 solves this problem. Any reason you didn’t use this? ? Dave G4UGM ? ? I have a new RP400 I'm trying to use with Hampi v 1.0.? Running the software that came with the computer, I have time/date updates, wifi and software updates.? Running Hampi 1.0, I don't get any of that. I've spent several days looking for a solution without success.? I've hooked the 400 up to ethernet and can get on the web, but no luck with updates, time, or wifi.
As if I didn't have enough working against me, I'm also brand new to Linux. Can anyone help?? Thanks!
|
Thank you Dave.??
I tried V2 several times with two different cards and it would crash during loading.? The image was about 1/2 the size of the V1 image which made me suspicious of the file.
Can you suggest a link to a known good V2 source and I'll give it another shot?
Bill K7HAR
Bill, Assuming v1 has the drivers for the 400 Wi-Fi I expect its because V1.0 defaults to being an access point. You need to disable it. Instructions are here:- ? /g/RaspberryPi-4-HamRadio/message/9549 ? V2 solves this problem. Any reason you didn’t use this? ? Dave G4UGM ? ? I have a new RP400 I'm trying to use with Hampi v 1.0.? Running the software that came with the computer, I have time/date updates, wifi and software updates.? Running Hampi 1.0, I don't get any of that. I've spent several days looking for a solution without success.? I've hooked the 400 up to ethernet and can get on the web, but no luck with updates, time, or wifi.
As if I didn't have enough working against me, I'm also brand new to Linux. Can anyone help?? Thanks!
|
Hi
I think the Ham Pi is maybe up to V3 or 4 now, it might be wise
to try the latest issue.
I did try it out on V1 but found it was a little to much, way
more than I wanted to use.
Marty kd8bj
On 1/2/21 2:54 PM, Bill Harden wrote:
toggle quoted message
Show quoted text
Thank you Dave.??
I tried V2 several times with two different
cards and it would crash during loading.? The image was about
1/2 the size of the V1 image which made me suspicious of the
file.
Can you suggest a link to a known good V2 source
and I'll give it another shot?
Bill K7HAR
Bill,
Assuming v1
has the drivers for the 400 Wi-Fi I expect its
because V1.0 defaults to being an access point.
You need to disable it. Instructions are here:-
?
/g/RaspberryPi-4-HamRadio/message/9549
?
V2 solves this
problem. Any reason you didn’t use this?
?
Dave
G4UGM
?
?
I
have a new RP400 I'm trying to use
with Hampi v 1.0.? Running the
software that came with the computer,
I have time/date updates, wifi and
software updates.? Running Hampi 1.0,
I don't get any of that.
I've
spent several days looking for a
solution without success.? I've
hooked the 400 up to ethernet and
can get on the web, but no luck with
updates, time, or wifi.
As if I didn't have enough working
against me, I'm also brand new to
Linux.
Can
anyone help?? Thanks!
|
Sorry 1.2 appears to be the latest as you say. ? Dave ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Bill Harden
Sent: 02 January 2021 21:59
To: [email protected]
Subject: Re: [RaspberryPi-4-HamRadio] Ham Pi on Raspberry Pi 400? Correction.? I tried V1.2 not 2.0.? I can't seem to find 2.0 on Hampi, only on its predecessor.? ? On Sat, Jan 2, 2021, 12:54 PM Bill Harden <hardenwl@...> wrote: I tried V2 several times with two different cards and it would crash during loading.? The image was about 1/2 the size of the V1 image which made me suspicious of the file. Can you suggest a link to a known good V2 source and I'll give it another shot? Bill K7HAR Bill, Assuming v1 has the drivers for the 400 Wi-Fi I expect its because V1.0 defaults to being an access point. You need to disable it. Instructions are here:- ? /g/RaspberryPi-4-HamRadio/message/9549 ? V2 solves this problem. Any reason you didn’t use this? ? Dave G4UGM ? ? I have a new RP400 I'm trying to use with Hampi v 1.0.? Running the software that came with the computer, I have time/date updates, wifi and software updates.? Running Hampi 1.0, I don't get any of that. I've spent several days looking for a solution without success.? I've hooked the 400 up to ethernet and can get on the web, but no luck with updates, time, or wifi.
As if I didn't have enough working against me, I'm also brand new to Linux. Can anyone help?? Thanks!
|
V2 is not Ham-Pi. It is the predecessor and is old
Get
Thank you Dave.??
I tried V2 several times with two different cards and it would crash during loading.? The image was about 1/2 the size of the V1 image which made me suspicious of the file.
Can you suggest a link to a known good V2 source and I'll give it another shot?
Bill K7HAR Bill, Assuming v1 has the drivers for the 400 Wi-Fi I expect its because V1.0 defaults to being an access point. You need to disable it. Instructions are here:- ? /g/RaspberryPi-4-HamRadio/message/9549 ? V2 solves this problem. Any reason you didn’t use this? ? Dave G4UGM ? ? I have a new RP400 I'm trying to use with Hampi v 1.0.? Running the software that came with the computer, I have time/date updates, wifi and software updates.? Running Hampi 1.0, I don't get any of that. I've spent several days looking for a solution without success.? I've hooked the 400 up to ethernet and can get on the web, but no luck with updates, time, or wifi.
As if I didn't have enough working against me, I'm also brand new to Linux. Can anyone help?? Thanks!
|
It's at 1.2a was the last release a couple weeks ago
Get
On Jan 2, 2021, at 14:35, Marty Hartwell < mhartwe@...> wrote:
toggle quoted message
Show quoted text
Hi
I think the Ham Pi is maybe up to V3 or 4 now, it might be wise to try the latest issue.
I did try it out on V1 but found it was a little to much, way more than I wanted to use.
Marty kd8bj
On 1/2/21 2:54 PM, Bill Harden wrote:
Thank you Dave.??
I tried V2 several times with two different cards and it would crash during loading.? The image was about 1/2 the size of the V1 image which made me suspicious of the file.
Can you suggest a link to a known good V2 source and I'll give it another shot?
Bill K7HAR
Bill,
Assuming v1 has the drivers for the 400 Wi-Fi I expect its because V1.0 defaults to being an access point. You need to disable it. Instructions are here:-
?
/g/RaspberryPi-4-HamRadio/message/9549
?
V2 solves this problem. Any reason you didn’t use this?
?
Dave
G4UGM
?
?
I have a new RP400 I'm trying to use with Hampi v 1.0.? Running the software that came with the computer, I have time/date updates, wifi and software updates.? Running Hampi 1.0, I don't get any of that.
I've spent several days looking for a solution without success.? I've hooked the 400 up to ethernet and can get on the web, but no luck with updates, time, or wifi.
As if I didn't have enough working against me, I'm also brand new to Linux.
Can anyone help?? Thanks!
|
That must be what I was thinking of, time frame is right.
Marty kd8bj
On 1/2/21 4:53 PM, N5XMT wrote:
toggle quoted message
Show quoted text
It's at 1.2a was the last release a couple weeks
ago
Get
On Jan 2, 2021, at 14:35, Marty Hartwell
< mhartwe@...> wrote:
Hi
I think the Ham Pi is maybe up to V3 or 4 now, it might be
wise to try the latest issue.
I did try it out on V1 but found it was a little to much,
way more than I wanted to use.
Marty kd8bj
On 1/2/21 2:54 PM, Bill Harden
wrote:
Thank you Dave.??
I tried V2 several times with two
different cards and it would crash during loading.? The
image was about 1/2 the size of the V1 image which made
me suspicious of the file.
Can you suggest a link to a known good V2
source and I'll give it another shot?
Bill K7HAR
Bill,
Assuming
v1 has the drivers for the 400 Wi-Fi I
expect its because V1.0 defaults to being an
access point. You need to disable it.
Instructions are here:-
?
/g/RaspberryPi-4-HamRadio/message/9549
?
V2
solves this problem. Any reason you didn’t
use this?
?
Dave
G4UGM
?
?
I
have a new RP400 I'm trying to
use with Hampi v 1.0.? Running
the software that came with the
computer, I have time/date
updates, wifi and software
updates.? Running Hampi 1.0, I
don't get any of that.
I've
spent several days looking for
a solution without success.?
I've hooked the 400 up to
ethernet and can get on the
web, but no luck with updates,
time, or wifi.
As if I didn't have enough
working against me, I'm also
brand new to Linux.
Can
anyone help?? Thanks!
|
Looking at the Ham-Pi forum at on groups.io, it seems the current version is 1.2, which was released on December 7th.
HTH
|
