Re: Any PI mag non-subscriber receive an 8gb Pi-5 yet?
Same for The PiShop.us - ordered placed on Sept 28, and still waiting. My order has listed as “sequenced for shipping” for the last two weeks. They are also “holding” a few other items I ordered at the same time, all were listed as in stock in September.?
Of course, they charged my credit card few days after the order was placed.
I won’t be ordering from them again.
toggle quoted message
Show quoted text
On Nov 9, 2023, at 12:15?PM, David Ranch <rpi4hamradio-groupsio@...> wrote:
?
I'm in agreement with John on this one.? I've always
liked Adafruit with their community, their documentation, and
accepted their higher prices.? That said, it seems Adafruit
doesn't really support any form of "pre-order" and instead, they
only seem to offer a "notify me when there is more stock"
solution.? I signed up for that the day the Rpi5 was released (I
think around September 28th, 2023) but I still haven't received
anything from Adafruit and now I read that Rob KK6JNI already
received an Rpi5 from them yet only ordered last week.? WTF??
That's even worse than my initial concern with their notification
system where once I get the email, other people could respond more
quickly than I and buy out all their stock.? Grrrrr....
I guess I need to switch gears, go to Sparkfun and do a real
pre-order and get into the back of the line.? :-(
--David
KI6ZHD
On 11/09/2023 04:27 AM, John wrote:
Congratulations on getting you Pi from Adafruit.? I ordered
from SparkFun Oct 28 because Adafruit was not taking advanced
orders.? It was my first and only order from SparkFun.
I have learned my lesson.
John,? WoGN
On 2023-11-06 18:03, Rob Johnson KK6JNI wrote:
I received my Pi 5 8GB today (11-06-2023)
from Adafruit, ordered last week.
|
Re: Any PI mag non-subscriber receive an 8gb Pi-5 yet?
I'm in agreement with John on this one.? I've always
liked Adafruit with their community, their documentation, and
accepted their higher prices.? That said, it seems Adafruit
doesn't really support any form of "pre-order" and instead, they
only seem to offer a "notify me when there is more stock"
solution.? I signed up for that the day the Rpi5 was released (I
think around September 28th, 2023) but I still haven't received
anything from Adafruit and now I read that Rob KK6JNI already
received an Rpi5 from them yet only ordered last week.? WTF??
That's even worse than my initial concern with their notification
system where once I get the email, other people could respond more
quickly than I and buy out all their stock.? Grrrrr....
I guess I need to switch gears, go to Sparkfun and do a real
pre-order and get into the back of the line.? :-(
--David
KI6ZHD
On 11/09/2023 04:27 AM, John wrote:
toggle quoted message
Show quoted text
Congratulations on getting you Pi from Adafruit.? I ordered
from SparkFun Oct 28 because Adafruit was not taking advanced
orders.? It was my first and only order from SparkFun.
I have learned my lesson.
John,? WoGN
On 2023-11-06 18:03, Rob Johnson KK6JNI wrote:
I received my Pi 5 8GB today (11-06-2023)
from Adafruit, ordered last week.
|
Re: Any PI mag non-subscriber receive an 8gb Pi-5 yet?
Congratulations on getting you Pi from Adafruit.? I ordered from SparkFun Oct 28 because Adafruit was not taking advanced orders.? It was my first and only order from SparkFun.
I have learned my lesson.
John,? WoGN
toggle quoted message
Show quoted text
On 2023-11-06 18:03, Rob Johnson KK6JNI wrote:
I received my Pi 5 8GB today (11-06-2023) from Adafruit, ordered last week.
|
Re: Any PI mag non-subscriber receive an 8gb Pi-5 yet?
I received my Pi 5 8GB today (11-06-2023) from Adafruit, ordered last week.
|
Re: Any PI mag non-subscriber receive an 8gb Pi-5 yet?
Dang adafruit sold out just order from pihut 8gig I saw raspi 5s on ebay too expensive they use program like used in scalping tickets to get those . I'll get it next year when pre-order ships !=8(
On Thu, Nov 2, 2023, 12:42 PM Kevin McCrory < kbmccrory@...> wrote: Newark Electronics has them listed but none in stock at this time. This is for the bare board.
73 Kevin
Pre-ordered mine from the Pi Hut on 28th September.
Not heard a word since.
Nope.? I received an email from SparkFun saying they received their first batch and sent all those out to the first pre-orders.? They said they expect mid-november to be their next incoming shipment. Mine was ordered October 3rd
Get
On Oct 31, 2023, at 10:11, John < radio@...> wrote:
Has anyone who pre-ordered an 8gb Pi-5 and is not a subscriber to one of the 'preferential order' magazines received their Pi-5 yet?
If so, when was it ordered, and when was it received?
|
Re: RPI5 / Bookworm / WSJTX / Icom IC705
For follow-up, RPI5 with Bookworm OS and X11 desktop works with WSJTX and JTDX flawlessly with the IC705 when ECHO is turned off.
Edd - KD5M
|
RPI5 / Bookworm / WSJTX / Icom IC705
I have WSJTX 2.6.1 and JTDX 2.2.159 installed (via sudo apt install ...) and working on my RPI5 with an IC7300.
I am unable to get either to connect to an Icom IC705 via USB (115200, N 8 2). The RPI5 sees the IC705 ports (ttyACM0 and ttyACM1) and the TI Burr-Brown audio codec - I get communications errors or protocol errors. The error messages displayed by WSJTX show that the RPI5 / software is reading some of the called values (VFO frequency) but not completing the connection. I also see the IC705 change frequency as it is polled by the software.
Has anyone been successful in connecting to an IC705?
Or is there an error in libhamlib for the armhf / linux package for the IC705?
The IC705 works without difficulty with the same software settings when connected to my Win10 desktop.
Any help will be appreciated.
Edd - KD5M
|
Ha ha, one is designed as a fail over (and water cooled) and the other used to reside in my work bag. Naturally the work bag device is around 80mm cubed and very portable and weighs around 750 grammes.?
De Spence M0STO
??
Sent while portable! please excuse typos.
toggle quoted message
Show quoted text
On 4 Nov 2023, at 19:00, N5XMT <dacooley@...> wrote:
? that isn't very portable though... I use a cyberpower 1000 ups. The pi can monitor the usb power alerts and do a smart shitdown.
This Waveshare full size HAT supports 5v @ 5A via
pogo pins going to the GPIO pins.? It should be compatible but it
doesn't specifically say it:
??
--David
KI6ZHD
On 11/03/2023 10:28 AM, Robert galambos
wrote:
Anyone know of a ups for the new pi 5. The one I found
sunfounder is not compatible (hat and amperage)?
Va3bxg?
|
that isn't very portable though...
I use a cyberpower 1000 ups. The pi can monitor the usb power alerts and do a smart shitdown.
This Waveshare full size HAT supports 5v @ 5A via
pogo pins going to the GPIO pins.? It should be compatible but it
doesn't specifically say it:
??
--David
KI6ZHD
On 11/03/2023 10:28 AM, Robert galambos
wrote:
Anyone know of a ups for the new pi 5. The one I found
sunfounder is not compatible (hat and amperage)?
Va3bxg?
|
I use a cyberpower 1000 ups. The pi can monitor the usb power alerts and do a smart shitdown.
This Waveshare full size HAT supports 5v @ 5A via
pogo pins going to the GPIO pins.? It should be compatible but it
doesn't specifically say it:
??
--David
KI6ZHD
On 11/03/2023 10:28 AM, Robert galambos
wrote:
Anyone know of a ups for the new pi 5. The one I found
sunfounder is not compatible (hat and amperage)?
Va3bxg?
|
My suspicion is that it will work just fine.? I have a motor control
hat on my Pi 4B, one which takes +12v in for the motor and then
feeds +5 down to the Pi for its power too.? Very handy.? I asked one
of the early Pi-5 reviewers if it would work with the 5 - i.e. could
you feed power down to the Pi via the GPIO pins just like the
earlier models - and the answer was yes.
Greg? KO6TH
Spence M0STO via groups.io wrote:
toggle quoted message
Show quoted text
If you see the top line of my screen shot, it says it’s backwards
compatible with nearly all previous Pi models with a 40 pin
header.
? This doesn’t use pogo pins but a jumper cable for various
GPIO assignments and 3.3v, 5v and Gnd. I can’t say if it’s
compatible with a Rpi 5 as it wasn’t even invented when this
spec sheet was published but if the Pi5 uses the same pin
assignment as the Pi4, I can’t see any reason why it won’t
work.?
? I personally use two different versions. 1 has 8 batteries
and the other 12 and will happily run at full tilt for 16
hours.?
I also have a much more power hungry Nvidia Jetson Nano
(several actually) in my workshop and they last days in 5w mode
when power is lost. Obviously the Nano and Pi aren’t compatible
but what I believe is possible is stacking even more batteries
perhaps 24 or more, however, the circuit simply isn’t beefed up
enough to charge such high capacity and the limit for the X750
is 12 x 18650 and around 38.4amp total capacity via the XH2.54
connector.
? ? Geekworm claim there is no limit to stacking X750-A2
battery boards but the overall charge current will only be
2.5amp. So recharging 12 batteries from a presumed flat (only a
fool would run their 18650’s that’s low) but for the sake of
argument it would take a little over 16 hours to recharge. I use
genuine Panasonic 18650’s and they seem to last ages and take
around 11 hours (basically over night) to recharge 12 from 25%
capacity.
? I will buy a Raspberry pi5 in the coming week and try out
my X750 on it but confident it will work but I would suggest
wait until you hear from SupTronics as they may have modified
version in the pipeline.?
? Kind regards,
De Spence M0STO?
Sent while portable! please excuse typos.
?
This Waveshare full size HAT supports 5v @
5A via pogo pins going to the GPIO pins.? It should be
compatible but it doesn't specifically say it:
??
--David
KI6ZHD
On 11/03/2023 10:28 AM, Robert
galambos wrote:
Anyone know of a ups for the new pi 5. The one
I found sunfounder is not compatible (hat and amperage)?
Va3bxg?
|
If you see the top line of my screen shot, it says it’s backwards compatible with nearly all previous Pi models with a 40 pin header.
? This doesn’t use pogo pins but a jumper cable for various GPIO assignments and 3.3v, 5v and Gnd. I can’t say if it’s compatible with a Rpi 5 as it wasn’t even invented when this spec sheet was published but if the Pi5 uses the same pin assignment as the Pi4, I can’t see any reason why it won’t work.?
? I personally use two different versions. 1 has 8 batteries and the other 12 and will happily run at full tilt for 16 hours.?
I also have a much more power hungry Nvidia Jetson Nano (several actually) in my workshop and they last days in 5w mode when power is lost. Obviously the Nano and Pi aren’t compatible but what I believe is possible is stacking even more batteries perhaps 24 or more, however, the circuit simply isn’t beefed up enough to charge such high capacity and the limit for the X750 is 12 x 18650 and around 38.4amp total capacity via the XH2.54 connector.
? ? Geekworm claim there is no limit to stacking X750-A2 battery boards but the overall charge current will only be 2.5amp. So recharging 12 batteries from a presumed flat (only a fool would run their 18650’s that’s low) but for the sake of argument it would take a little over 16 hours to recharge. I use genuine Panasonic 18650’s and they seem to last ages and take around 11 hours (basically over night) to recharge 12 from 25% capacity.
? I will buy a Raspberry pi5 in the coming week and try out my X750 on it but confident it will work but I would suggest wait until you hear from SupTronics as they may have modified version in the pipeline.?
? Kind regards,
De Spence M0STO?
Sent while portable! please excuse typos.
toggle quoted message
Show quoted text
On 4 Nov 2023, at 01:34, David Ranch <rpi4hamradio-groupsio@...> wrote:
?
This Waveshare full size HAT supports 5v @ 5A via
pogo pins going to the GPIO pins.? It should be compatible but it
doesn't specifically say it:
??
--David
KI6ZHD
On 11/03/2023 10:28 AM, Robert galambos
wrote:
Anyone know of a ups for the new pi 5. The one I found
sunfounder is not compatible (hat and amperage)?
Va3bxg?
|
This Waveshare full size HAT supports 5v @ 5A via
pogo pins going to the GPIO pins.? It should be compatible but it
doesn't specifically say it:
??
--David
KI6ZHD
On 11/03/2023 10:28 AM, Robert galambos
wrote:
toggle quoted message
Show quoted text
Anyone know of a ups for the new pi 5. The one I found
sunfounder is not compatible (hat and amperage)?
Va3bxg?
|
I took a quick look and what I found, was a line saying it's ONLY for rpi4. I sent a message and will see how they respond.
Thanks for the info
Robert Galambos VA3BXG/CIW630
DEC for YORK & DURHAM Region ARES.
ASEC GTA ARES section
M: +1-416-876-2979
E:?? va3bxg@...
WL: va3bxg@...
toggle quoted message
Show quoted text
Sent while portable! please excuse typos.
On 3 Nov 2023, at 20:07, Spencer Tomlinson <unavailable.equal@...> wrote:
?
The Suptronics X750 and X750-A2 can supply 5.1v @ 8amp. I also use the T208 for my Nvidia Jetson Nanos.
Hope that helps,
Spence
Sent while portable! please excuse typos.
On 3 Nov 2023, at 19:38, N5XMT <dacooley@...> wrote:
?
They need to advertise better. 5.1v at 6 amos is better than their new power supply for the 5
Get BlueMail for Android
On Nov 3, 2023, at 11:55, "Spence M0STO via " <@groups.io target=_blank>[email protected]> wrote:
Have you looked up the Spec for the Suptronics (AKA Geekworm) UPS?
I have several hooked up to my Rpi4 4gbs and they perform flawlessly.
Spence
Sent while portable! please excuse typos.
On 3 Nov 2023, at 18:33, N5XMT <dacooley@...> wrote:
?
There aren't any yet.
Get BlueMail for Android
On Nov 3, 2023, at 10:28, Robert galambos <va3bxg@...> wrote:
Anyone know of a ups for the new pi 5. The one I found sunfounder is not compatible (hat and amperage)
Va3bxg
|
 Sent while portable! please excuse typos.
toggle quoted message
Show quoted text
On 3 Nov 2023, at 20:07, Spencer Tomlinson <unavailable.equal@...> wrote:
? The Suptronics X750 and X750-A2 can supply 5.1v @ 8amp. I also use the T208 for my Nvidia Jetson Nanos.?
Hope that helps,
Spence?
Sent while portable! please excuse typos. On 3 Nov 2023, at 19:38, N5XMT <dacooley@...> wrote:
? They need to advertise better.? 5.1v at 6 amos is better than their new power supply for the 5
Get
On Nov 3, 2023, at 11:55, "Spence M0STO via " < googlemail.com@groups.io target=_blank> [email protected]> wrote:
Have you looked up the Spec for the Suptronics (AKA Geekworm) UPS?
I have several hooked up to my Rpi4 4gbs and they perform flawlessly.
Spence?
Sent while portable! please excuse typos.
On 3 Nov 2023, at 18:33, N5XMT <dacooley@...> wrote:
?
There aren't any yet.
Get
On Nov 3, 2023, at 10:28, Robert galambos < va3bxg@...> wrote:
Anyone know of a ups for the new pi 5. The one I found sunfounder is not compatible (hat and amperage)?
Va3bxg?
|
The Suptronics X750 and X750-A2 can supply 5.1v @ 8amp. I also use the T208 for my Nvidia Jetson Nanos.?
Hope that helps,
Spence?
Sent while portable! please excuse typos.
toggle quoted message
Show quoted text
On 3 Nov 2023, at 19:38, N5XMT <dacooley@...> wrote:
? They need to advertise better.? 5.1v at 6 amos is better than their new power supply for the 5
Get
On Nov 3, 2023, at 11:55, "Spence M0STO via " < googlemail.com@groups.io target=_blank> [email protected]> wrote:
Have you looked up the Spec for the Suptronics (AKA Geekworm) UPS?
I have several hooked up to my Rpi4 4gbs and they perform flawlessly.
Spence?
Sent while portable! please excuse typos.
On 3 Nov 2023, at 18:33, N5XMT <dacooley@...> wrote:
?
There aren't any yet.
Get
On Nov 3, 2023, at 10:28, Robert galambos < va3bxg@...> wrote:
Anyone know of a ups for the new pi 5. The one I found sunfounder is not compatible (hat and amperage)?
Va3bxg?
|
They need to advertise better.? 5.1v at 6 amos is better than their new power supply for the 5
Get
Have you looked up the Spec for the Suptronics (AKA Geekworm) UPS?
I have several hooked up to my Rpi4 4gbs and they perform flawlessly.
Spence?
Sent while portable! please excuse typos.
On 3 Nov 2023, at 18:33, N5XMT <dacooley@...> wrote:
?
There aren't any yet.
Get
On Nov 3, 2023, at 10:28, Robert galambos < va3bxg@...> wrote:
Anyone know of a ups for the new pi 5. The one I found sunfounder is not compatible (hat and amperage)?
Va3bxg?
|
Sent while portable! please excuse typos.
toggle quoted message
Show quoted text
On 3 Nov 2023, at 18:55, Spencer Tomlinson <unavailable.equal@...> wrote:
? Have you looked up the Spec for the Suptronics (AKA Geekworm) UPS?
I have several hooked up to my Rpi4 4gbs and they perform flawlessly.
Spence? Sent while portable! please excuse typos. On 3 Nov 2023, at 18:33, N5XMT <dacooley@...> wrote:
? There aren't any yet.
Get
On Nov 3, 2023, at 10:28, Robert galambos < va3bxg@...> wrote:
Anyone know of a ups for the new pi 5. The one I found sunfounder is not compatible (hat and amperage)?
Va3bxg?
|
Have you looked up the Spec for the Suptronics (AKA Geekworm) UPS?
I have several hooked up to my Rpi4 4gbs and they perform flawlessly.
Spence? Sent while portable! please excuse typos.
toggle quoted message
Show quoted text
On 3 Nov 2023, at 18:33, N5XMT <dacooley@...> wrote:
? There aren't any yet.
Get
On Nov 3, 2023, at 10:28, Robert galambos < va3bxg@...> wrote:
Anyone know of a ups for the new pi 5. The one I found sunfounder is not compatible (hat and amperage)?
Va3bxg?
|
|
|
Rob Johnson KK6JNI
Spence G5STO
Steve Spence