开云体育

I stand corrected. Open mouth and inset foot. Is it true that the official PS only has a four foot power cord? Sounds rather short. Max KG4PID

You should do a little research on the Pi5. The official Pi5 power supply is PD and the pi does have the circuitry to request the higher power.? The previous versions of the Pi didn't have the

Thanks for sharing your find Ken

my research says that a QC and PD port has to negotiate to get higher power.? Can a Pi 5 do that???I don't think so. https://en.wikipedia.org/wiki/Quick_Charge "Quick Charge requires both the

Ken, Any USB-C standard power outlet will have the standard 5V, 9V, and 12V pins, you just need one rated at 28W or higher. Your 30W unit will work fine. Tom NK5H

I’m running a Pi 5 here, with pretty good successes. It is my intention to build it into a portable PC for radio operations (e.g., POTA, vacations). One concern I had was regarding power when I’m

Thanks for your comments. I hadn't realised how many UDP ports SDR Console uses to talk to radios. I used wire shark to monitor traffic to the radio on my LAN and forwarded all the ports I could see

David, I can edit the config.txt file. It is here: /boot/firmware/config.txt

And I'm running the latest firmware as well with sudo rpi-eeprom-update -d -a ?Get BlueMail for Android ?

If you can't even edit the config.txt file, then the file system on the drive has issues. As long as you are using sudo, you have permissions to write the system files. ?Get BlueMail for Android

Thanks for your reply. Originally I did those things, but set up for only gen=2 and it worked, but didn't seem to boot any faster than my USB SSD on the Pi-4b. I don't know what I've done now, but I

Do a sudo apt install hdparm -y Then do sudo hdparm -Y /dev/nvme0n1 Post the numbers here Also, did you enable PCI-E 3 lines in config.txt needs to say dtparam=pciex1 dtparam=pciex1_gen=3 in that

A Fikwot FN501 PRO NVMe was installed on my Pi-5 following a Utube video by Jeff Gerling. It boots without the SD card, but seems slow and the test method used by Jeff doesn't work with my setup. I

The UDP packets need to be delivered with low latency. Not something the internet will help fix. You could try a VPN but I don’t think the IQ data will be useful with delays and drops from the

Hi I have an HF transceiver based on a Pi4 and radio berry. It works fine on my LAN with SDRConsole but I am unable to connect to it from the internet. On my LAN I have fixed the IP address in my

The pimoroni and pineberry pi bottom hats both fit in a case I found on thingiverse and 3d printed. It also fits with the Pi5 active cooler as well. They also have about 5 more for the Pi5 with the

I saw one official on the rasperry.com site, under products. It was from California store.

Larry, I'm using the Geekworm P579 with top hat SSD. The SSD sits on top of the Active cooler. It didn't seem like it would go together, but when mounted, fit together just fine. I went with top

I ordered both the Geekworm P579 case (Top NVMe Hat) and the Geekworm P580 case (Bottom NVMe Hat) from Amazon (same price as Geekworm site). The RPi5 with the active cooler and the Pineberry Pi Top

I had an interesting result, basically trying this same test. ?I modified ax25d.conf and replaced rmsgw with /usr/games/fortune on my test Pi pair. ?The idea was to use a non-ax.25 app to produce