开云体育

The pimoroni and pineberry pi bottom hats both fit in a case I found on thingiverse and 3d printed. It also fits with the Pi5 active cooler as well. They also have about 5 more for the Pi5 with the

I saw one official on the rasperry.com site, under products. It was from California store.

Larry, I'm using the Geekworm P579 with top hat SSD. The SSD sits on top of the Active cooler. It didn't seem like it would go together, but when mounted, fit together just fine. I went with top

I ordered both the Geekworm P579 case (Top NVMe Hat) and the Geekworm P580 case (Bottom NVMe Hat) from Amazon (same price as Geekworm site). The RPi5 with the active cooler and the Pineberry Pi Top

I had an interesting result, basically trying this same test. ?I modified ax25d.conf and replaced rmsgw with /usr/games/fortune on my test Pi pair. ?The idea was to use a non-ax.25 app to produce

Hi David, No entries in the log files on disk; syslog simply can't get them written with the kernel panicked. However, I do get an Oops with every crash. ?Certainly on the serial console, but I

So, I tried testing this way, but I messed up the test; I haven't fixed persistent device names for my usb audio, so the AX.25 stack was down for a couple of days before I noticed. Instead of

Hello Michael, Did you find anything in the OS system logs related to this issue? Maybe a kernel oops, etc? --David KI6ZHD

Hello Greg, Geekworm makes several cases for the RPi-5: https://geekworm.com/search?type=product&q=raspberry+%22Pi+5%22+case Is this the one you're using? https://geekworm.com/products/p580 or

Hi Jon, I think you make a very good point here; ax25d is a wrapper to rmsgw, much like inetd was a wrapper to telnet way back in the day. ?If I recall, the wrapper handles binding to the interface

Mike,? excellent observation. I will try this scenario on my Pi with bookworm, and replace the /usr/local/bin/rmsgw with a shell script that writes to a log file. Disconnect the vhf radio, disable

Thank you all. The issue was with sdrtrunk. The current stable version did not work. The latest overnight release did. -- Jay WB2QQJ

Just a quick update on this, I checked on the Pis I had left in this state (with rmsgw disabled) and found that both were healthy after 8 days. ?To close the loop on this and demonstrate that rmsgw

More good tips, thanks. I’m inching my way closer to victory today. I hadn’t seen the step about the VB OCX, so I’ve done that now and things seem more stable. Also, I noticed the UI in VarAC

I do believe so, as it has all the basic drivers and libraries ?Get BlueMail for Android ?

Is the rtladr package required for an sdrplay rsp1a ? -- Jay WB2QQJ

There was a new beta released 8.6 which I loaded successfully on a pi5 latest yesterday after the wine environment is setup with all the VB OCX just install varAC with the installer. I just loaded a

Thanks for that tip. I’m back from travel now and gave it a try. Sadly, same problem. I tried also turning off advanced mode in the INI file. Same thing. Attached is a screenshot of what my VarAC

Did you install the rtladr package?? That has the drivers in it ?Get BlueMail for Android ?

Look at the dates of the 2 image files.? Are they the same or different?? I noticed the image I downloaded dated October or November 2023 had the symlinks.? The latest image has the /boot/*.txt