开云体育

is the Apt like thing something like apt install xxx?

Just bought a Samsung M50C Smart Monitor, but I'm having trouble getting it to work on my RPi-4b w/Bookworm. The set up screen does not show a Linux option, only Windows PC and Apple and some other

I have not found *any* browser that works on a pi zero that isn't slow, and doesn't crash the pi ?Get BlueMail for Android ?

Hi! Somebody can recommend a light browser for the Pi Zero? Thanks in advance, Jorge VE3EAD

----- Forwarded Message ----- From: Pineberry Pi <mgapinski@...>To: "ldighera@..." <ldighera@...>Sent: Friday, December 8, 2023 at 05:33:35 PM PSTSubject: A shipment from

Ah, Leland and I took a lot of discussion direct, not on the forum. As he had not posted before, he was "New Member Moderated" which delayed his post, so he contacted me directly. That's why my

Here is your info and a reply from Leland explaining the issue... This is from yesterday afternoon: ? $ ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen

Maybe I am not receiving all the messages for some reason. I just reread every message I have received on the subject. I have not found any message that shows anything different than what I sent

When you sent this information the other day, the default 192.168.2.1 line had something else in front of it.? 2 different people stated that it meant that the default gateway wasn't set properly, so

Please forgive my ignorance. Here is my gateway info: $ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.2.1

Hi Michael, I used to have a supervisor named Michael in my Guard unit where we maintained a TSC-60. Check out https://w7tsc.org Thank you for the recap. I’ll try to unpack this best I can, no

Not sure why you aren't taking the advice that has been given, and only repeating yourself over and over.? Your default gateway is NOT set properly on the hamclock pi.? That is why you can only ping

TSC-60 Man Washington: Issue Recap: On the local network are two RPis, hamclock-pi (192.168.2.150) and trailer-pi(192.168.2.163) (along with many other things on the network). Both RPis pretty much

Please define “it can ssh to itself.” That statement makes no sense to me. From where, to where, via what route? Please be painfully specific. Can you successfully ping the HamClock Pi from

Yes, it is enabled. It can ssh to itself, just nowhere else. It was working fine six months or so ago and hasn't been touched since until now. Michael WA7SKG Patrick Ouellette wrote on 12/5/23 3:55

I'd ssh enabled in rpi config? The pi has to be listening for connections from the network.

if you issue this command: *sudo route add default gw 192.168.2.1 wlan0* do things start working? if so, *this *is probably your issue. noprefixroute means that a default gateway is not being added

if you issue the below command: sudo route add default gw 192.168.2.1 wlan0 do things start working? if so, *this* (inline in your copy pasted output below) is probably your issue. noprefixroute

if you issue the below command: sudo route add default gw 192.168.2.1 wlan0 do things start working? if so, this ***noprefixroute (inline in your copy pasted output below) is probably your issue.

Could have reflashed it by now hihi I like the puzzle, what about disable ssh service reboot and re-enable it via rasp-conf k