开云体育

Tried it on pi4 . HamPi has most of the same software including Gpredict. I’ll stick with that

I don't recall, but I think I forgot to include the link to the V1.0: https://forums.qrz.com/index.php?threads/hampi-1-0-released.711515/ Dennis, K1YPP

I came to the HamPi game late. I saw a video a week or two ago that talked about it, don't recall the fellow's call, something with 'OG' in it.I didn't realize that I came in at the middle of

So far I've tried TX levels of 4, 255, and 128.? Still nothing.? Am I supposed to get something other than a blank window when I push "test" on the port tab?

A TX level of 255 will put 3 volts peak to peak on that line.? That is pretty high and that will probably overdrive his radio.? MarkKD0QYN

OK tried setting the TX to 255, still getting a blank window when I test the port.

Looking in your getparams output, your txlevel was only 4. I'd set it to 255

OK I tried that, Tx is set to 255 now, but I'm still seeing the same condition, blank screen on testing the port ttyS0.

Yes! I got it to work. It only took a new antenna and an amplifier ? I was able to send an email from my HT via APRSlink. I now wished I had a BT keyboard to type :) Carlos N3RDR

just set it with pitnc_setparams /dev/serial0 10 255

Hi there, thanks for the reply.? That gives me: lrwxrwxrwx? ?1 root root? ? ? ? ? 5 Jul 11 11:33 serial0 -> ttyS0 lrwxrwxrwx? ?1 root root? ? ? ? ? 5 Jul 11 11:33 serial0 -> ttyS0 So

what do you get with "sudo ls -al /dev | grep serial"

Hello! Trying to get YAAC up and running on a TNC-Pi: Hardware: * Raspberry Pi 4 8G * 7" Touchscreen screen * TNC-Pi9K6 (G8BPQ v2 board, Teensy 3.6) * IC-7100 (6 pin DIN cable) Software: *

Thanks for posting this link. 73 - Bill KA8VIT ________________________________ Sent: Friday, July 10, 2020 9:05 AM To: [email protected] <[email protected]> Subject:

Hi Dennis I may be wrong but there are two V1.0 products that Dave W3DJS produced the first one was several months ago, unfortunately I removed all references to it so I can't tell what it was

Now I'm really confused. V1.0 is the newest version. I still have the image for V1.0, before I get things really etched in stone, I should go to V1.0? V1.0 seemed to have far fewer apps in it. I

Running a Pi4/2Gb here and all is fine. Just ordered a last generation RTL-(SDR) to see if it will work. Next step is installing dll's for other SDR's like the Adalm Pluto, Elad FDM-S2 and SDRplay

Dennis, I was refering to seeing those <...> in my recieve window, not actually transmitting them. I mistook that you were seeing them in the receive window. My elder moment :) James W8ISS

I’ve installed the image on RPi 3b+ and RTL-SDR boots fine all looks good, does not list any of the programs in the menu , ran the scripts on the desktop . associated apps dont run. To test the Pi

I personally love the DELETE key.