If there is another forum more appropriate to WSPRRY, kindly point me there. I just installed WSPRRY on my Model B.? I hooked it through a commercially-made band-pass filter for 20m, and am transmitting on 14097000. I have not seen any reception reports even after running for about 5 hours.? I tuned my HF receiver to 14097000, and can hear whenever it transmits.? I am listening on USB. I would expect to hear some tone changes, maybe like what I hear on WSJT, but to my untrained ear, it just sounds like a constant-frequency carrier.? Does that mean something is wrong? I have tried 2 different packages.? The screen display is different, but the results seem the same. "git clone "
and
" git clone "
Suggestions appreciated.
73 de Jim, KD1YV
?
|
Re: Raspberry Pi (B) with TNC-Pi not working
You are getting further than I am. Still haven't gotten the pitnc_getparams to work right. I do have it setup in Xastir however, and it will let me start the interface, configured as serial device, as you have above.?
Did you see this, about later model boards, needing a 1 0 to get pitnc_getparams to work right?
I wish Xastir had better Digipeating capability, since that is what I really need. We do public service events in rural areas, and while I can setup an Igate for efficient traffic passing, I really need to be able to Digipeat those same packets back a fair distance to reach the Igate. There are not a lot of Igates in rural areas.
Hopefully I can find a Digipeater software that works well with TNC-Pi, as I would rather do it this way, as opposed to a USB audio soundcard.
?
Hopefully I can find a Digipeater software that works well with TNC-Pi, as I would rather do it this way, as opposed to a USB audio soundcard.
|
Re: Xastir no offline maps
1.) I got all lines from the TIGER census data for 2013. It has roads files for each county in each state. I do Features - All Lines then choose the State and County I want. Do this on a desktop computer, then transfer over the database files to the SD card to make this easy and quick. In Xastir, go to maps, and deselect the online maps. In Xastir on the Pi I created a directory named Offline, then subfolders for each state I wanted, and then put the county files in separate folders in the state folders. Name them as each county/state on download, since the TIGER description is a bunch of letters and numbers.
Here is the TIGER data:? | | | | Select the layer you are interested in from the dropdown menu and click 'submit' for a list of the available geographic areas. Select a layer type ? Source: US Census Bureau, Geography Division | | | | Preview by Yahoo | | | ? ?
|
Hello all
Check out the Dv-Mega Gone Portable video series.
Part 1?
Part 2
Best 73?
Pedro Costa CT2JTR
|
Yep I did join the group last night thanks ? 73’蝉 ? David? VK4UN ? ?
toggle quoted message
Show quoted text
From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...]
Sent: Sunday, 24 August 2014 4:48 AM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: RE: [Raspberry_Pi_4-Ham_RADIO] Need Help? ? Hello David,
Something like that is usually a port problem. The troubleshoot script is pretty good at finding things like that. Glad that helped you get it going. Still may want to join the PiRLP group.
Mick - W7CAT
Node 3464
----- Original Message -----
From: "'VK4UN' vk4un@... [Raspberry_Pi_4-Ham_RADIO]"
To: Raspberry_Pi_4-Ham_RADIO@...
Sent: Saturday, August 23, 2014 05:30:01 AM
Subject: RE: [Raspberry_Pi_4-Ham_RADIO] Need Help
> Found the script Mick ran it and it found the port fwd problem, all fixed
> no thanks
>
>
>
>
>
> 73's
>
>
>
>
>
> David VK4UN
>
>
>
>
>
>
>
>
> From: Raspberry_Pi_4-Ham_RADIO@...
> [mailto:Raspberry_Pi_4-Ham_RADIO@...]
> Sent: Saturday, 23 August 2014 8:41 AM
> To: Raspberry_Pi_4-Ham_RADIO@...
> Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Need Help
>
>
>
>
>
>
>
>
> The first and most common question is always going to be "Have you run the
> troubleshoot script yet"? Also there is a PiRLP group that you may want to
> join and have better luck there.
>
>
>
> Mick - W7CAT
>
>
> ----- Original Message -----
> From: "'VK4UN' vk4un@... [Raspberry_Pi_4-Ham_RADIO]"
> To:
> Sent: Friday, August 22, 2014 03:54:54 PM
> Subject: [Raspberry_Pi_4-Ham_RADIO] Need Help
>
>
> > I have got my IRLP up and running on test node 6744
> >
> >
> >
> > Using a raspberry pi but the problem I have is when I do a connect via an
> > handheld
> >
> > To reflector 9990 to test the audio I get connected all ok and get the
> > connected message back
> >
> > BUT don't receive any audio back when I talk
> >
> >
> >
> > Does anyone have any idea why please
> >
> >
> >
> > I also connect to the 9100 and can hear them talking without any problems
> >
> >
> >
> > Regards
> >
> >
> >
> > David VK4UN
> >
> >
> >
> >
>
>
>
>
>
>
> --
>
>
> Be sure to check out all the latest at our web site
> and look at our repeater sites
> !
>
>
>
>
>
>
>
>
>
>
>
>
-- Be sure to check out all the latest at and look at our !
|
Hello David,
Something like that is usually a port problem. The troubleshoot
script is pretty good at finding things like that. Glad that helped
you get it going. Still may want to join the PiRLP group.
Mick - W7CAT
Node 3464
toggle quoted message
Show quoted text
----- Original Message -----
From: "'VK4UN' vk4un@... [Raspberry_Pi_4-Ham_RADIO]"
To: Raspberry_Pi_4-Ham_RADIO@...
Sent: Saturday, August 23, 2014 05:30:01 AM
Subject: RE: [Raspberry_Pi_4-Ham_RADIO] Need Help
> Found the script Mick ran it and it found the port fwd
problem, all fixed
> no thanks
>
>
>
>
>
> 73's
>
>
>
>
>
> David VK4UN
>
>
>
>
>
>
>
>
> From: Raspberry_Pi_4-Ham_RADIO@...
> [ mailto:Raspberry_Pi_4-Ham_RADIO@...]
> Sent: Saturday, 23 August 2014 8:41 AM
> To: Raspberry_Pi_4-Ham_RADIO@...
> Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Need Help
>
>
>
>
>
>
>
>
> The first and most common question is always going to be
"Have you run the
> troubleshoot script yet"? Also there is a PiRLP group that
you may want to
> join and have better luck there.
>
>
>
> Mick - W7CAT
>
>
> ----- Original Message -----
> From: "'VK4UN' vk4un@... [Raspberry_Pi_4-Ham_RADIO]"
> To:
> Sent: Friday, August 22, 2014 03:54:54 PM
> Subject: [Raspberry_Pi_4-Ham_RADIO] Need Help
>
>
> > I have got my IRLP up and running on test node 6744
> >
> >
> >
> > Using a raspberry pi but the problem I have is when I do
a connect via an
> > handheld
> >
> > To reflector 9990 to test the audio I get connected all
ok and get the
> > connected message back
> >
> > BUT don't receive any audio back when I talk
> >
> >
> >
> > Does anyone have any idea why please
> >
> >
> >
> > I also connect to the 9100 and can hear them talking
without any problems
> >
> >
> >
> > Regards
> >
> >
> >
> > David VK4UN
> >
> >
> >
> >
>
>
>
>
>
>
> --
>
>
> Be sure to check out all the latest at our web site
> and look at our repeater
sites
> !
>
>
>
>
>
>
>
>
>
>
>
>
--
Be sure to check out all the latest at
and look at our !
|
Found the script Mick?? ran it and it found the port fwd problem, all fixed no thanks ? 73’蝉 ? David? VK4UN ? ?
toggle quoted message
Show quoted text
From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...]
Sent: Saturday, 23 August 2014 8:41 AM
To: Raspberry_Pi_4-Ham_RADIO@...
Subject: Re: [Raspberry_Pi_4-Ham_RADIO] Need Help? ? The first and most common question is always going to be "Have you run the troubleshoot script yet"? Also there is a PiRLP group that you may want to join and have better luck there.
Mick - W7CAT
----- Original Message -----
From: "'VK4UN' vk4un@... [Raspberry_Pi_4-Ham_RADIO]"
To:
Sent: Friday, August 22, 2014 03:54:54 PM
Subject: [Raspberry_Pi_4-Ham_RADIO] Need Help
> I have got my IRLP up and running on test node 6744
>
>
>
> Using a raspberry pi but the problem I have is when I do a connect via an
> handheld
>
> To reflector 9990 to test the audio I get connected all ok and get the
> connected message back
>
> BUT don't receive any audio back when I talk
>
>
>
> Does anyone have any idea why please
>
>
>
> I also connect to the 9100 and can hear them talking without any problems
>
>
>
> Regards
>
>
>
> David VK4UN
>
>
>
>
-- Be sure to check out all the latest at and look at our !
|
The first and most common question is always going to be "Have you
run the troubleshoot script yet"? Also there is a PiRLP group that
you may want to join and have better luck there.
Mick - W7CAT
toggle quoted message
Show quoted text
----- Original Message -----
From: "'VK4UN' vk4un@... [Raspberry_Pi_4-Ham_RADIO]"
To:
Sent: Friday, August 22, 2014 03:54:54 PM
Subject: [Raspberry_Pi_4-Ham_RADIO] Need Help
> I have got my IRLP up and running on test node 6744
>
>
>
> Using a raspberry pi but the problem I have is when I do a
connect via an
> handheld
>
> To reflector 9990 to test the audio I get connected all ok
and get the
> connected message back
>
> BUT don't receive any audio back when I talk
>
>
>
> Does anyone have any idea why please
>
>
>
> I also connect to the 9100 and can hear them talking
without any problems
>
>
>
> Regards
>
>
>
> David VK4UN
>
>
>
>
--
Be sure to check out all the latest at
and look at our !
|
I have got my IRLP up and running on test node 6744 ? Using a raspberry pi but the problem I have is when I do a connect via an handheld To reflector 9990 to test the audio I get connected all ok ?and get the connected message back BUT don’t receive any audio back when I talk ? Does anyone have any idea why please ? I also connect to the 9100 and can hear them talking without any problems ? Regards ? David? VK4UN ?
|
Raspberry Pi (B) with TNC-Pi not working
I assembled the TNC-PI Kit and mounted it on the RPi. It passed the 3.3 volt test. The yellow DCD LED lights when there is APRS traffic on the radio, but there is no traffic on the screen, or, new stations. The command ls -l shows -rwxr-xr-x 1
pi pi??? 0 Aug 16 02:14 pitnc_getparams. The command ./pitnc_getparams 0 0 does not show anything, it just brings up the prompt. Xastir is running and tnc port = /dev/ttyAMA0(that is a zero at the end). It doesn't look to me like Xastir is talking to the TNC. I have no software going other than Xastir. Any help appreciated. Thanks. Jerry
|
Re: Bernards new FBB image
Hi Bernard
It would appear that I am miss understanding something in your documentation?? However I have no idea what? Are you able to point me to the appropriate paragraph ?
Regards Kerry
?
Hello Kerry,
I strongly suggest you read the documentation file at? while downloading the image of RPi AX.25 SD disk.
73 de Bernard f6bvp
?
this is the site where you can download the new image or run the
script bottom of page to update your current fbb install
?
ok were did you get the image new here
On 8/10/2014 11:17 AM, Kerry
McKenzie kermck@...
[Raspberry_Pi_4-Ham_RADIO] wrote:
?
On 8/11/2014 1:45 AM, Bill-K6ACJ k6acj@...
[Raspberry_Pi_4-Ham_RADIO] wrote:
?
After loading Bernard's new image do we still run
apt-get to maintain the system or does apt-get
somehow deteriorate the image ?
I've run Xastir aprs in the past 18 months and
would appreciate faster graphics on my model B.
Thanks, Bill K6ACJ
Hi Bill
if you go into Bernards site there are scripts for
updating the packages and he does mention updating and
upgrading linux
check this out
--
Kind Regards
Kerry McKenzie
Kind Regards
Kerry McKenzie
|
What to do when unemployed
What to do ?while unemployed ? Answer, ?Program? and app to decode ham radio APRS packet (Automatic Packet Reporting System) in C++ ?. ?
| | | | | | Ham Radio Fun Update APRS Decoder C++ Posted on August 17, 2014 by Scatcatpdx What to do ?while unemployed ? | | | | Preview by Yahoo | | |
|
|
|
My Raspberry arrived yesterday morning.I didn't get around to smoke testing it til later in the afternoon. I had a hell of a time with that ^&%$%$ little chip!It is so small that it is easy to missplace and if you are not carefulwhen you install it it will miss the socket and drop into the case under the board. Then you have to disconnect everything and shakethe silly bugger out the little hole.?After about four hours of operation it appears to run
almost 10 degrees cooler....see the attached screen shot for a Graph of the CPU temp.?I like the connecion arrangment. It allows for a neater cable arrangment. ?The Composite Video now is combined with the audio in one jack. I have an adaptor, but it is wired differently. Adafruit has a A/V cable that should work - ,?but is currently out of stock.The New RPi is now running my RMS Gate and Secondary FPAC node.<<Charley>>??? k4gbb
|
Re: Bernards new FBB image
Hello Kerry,
I strongly suggest you read the documentation file at? while downloading the image of RPi AX.25 SD disk. 73 de Bernard f6bvp
toggle quoted message
Show quoted text
?
this is the site where you can download the new image or run the
script bottom of page to update your current fbb install
?
ok were did you get the image new here
On 8/10/2014 11:17 AM, Kerry
McKenzie kermck@...
[Raspberry_Pi_4-Ham_RADIO] wrote:
?
On 8/11/2014 1:45 AM, Bill-K6ACJ k6acj@...
[Raspberry_Pi_4-Ham_RADIO] wrote:
?
After loading Bernard's new image do we still run
apt-get to maintain the system or does apt-get
somehow deteriorate the image ?
I've run Xastir aprs in the past 18 months and
would appreciate faster graphics on my model B.
Thanks, Bill K6ACJ
Hi Bill
if you go into Bernards site there are scripts for
updating the packages and he does mention updating and
upgrading linux
check this out
--
Kind Regards
Kerry McKenzie
Kind Regards
Kerry McKenzie
|
Re: Bernards new FBB image
this is the site where you can download the new image or run the
script bottom of page to update your current fbb install
?
ok were did you get the image new here
On 8/10/2014 11:17 AM, Kerry
McKenzie kermck@...
[Raspberry_Pi_4-Ham_RADIO] wrote:
?
On 8/11/2014 1:45 AM, Bill-K6ACJ k6acj@...
[Raspberry_Pi_4-Ham_RADIO] wrote:
?
After loading Bernard's new image do we still run
apt-get to maintain the system or does apt-get
somehow deteriorate the image ?
I've run Xastir aprs in the past 18 months and
would appreciate faster graphics on my model B.
Thanks, Bill K6ACJ
Hi Bill
if you go into Bernards site there are scripts for
updating the packages and he does mention updating and
upgrading linux
check this out
--
Kind Regards
Kerry McKenzie
--
Kind Regards
Kerry McKenzie
|
Re: Bernards new FBB image
ok were did you get the image new here
On 8/10/2014 11:17 AM, Kerry McKenzie
kermck@... [Raspberry_Pi_4-Ham_RADIO] wrote:
toggle quoted message
Show quoted text
?
On 8/11/2014 1:45 AM, Bill-K6ACJ k6acj@...
[Raspberry_Pi_4-Ham_RADIO] wrote:
?
After loading Bernard's new image do we still run
apt-get to maintain the system or does apt-get somehow
deteriorate the image ?
I've run Xastir aprs in the past 18 months and would
appreciate faster graphics on my model B. Thanks, Bill
K6ACJ
Hi Bill
if you go into Bernards site there are scripts for updating
the packages and he does mention updating and upgrading
linux
check this out
--
Kind Regards
Kerry McKenzie
|
Re: Bernards new FBB image
On 8/11/2014 1:45 AM, Bill-K6ACJ k6acj@...
[Raspberry_Pi_4-Ham_RADIO] wrote:
?
After loading Bernard's new image do we still run apt-get
to maintain the system or does apt-get somehow deteriorate
the image ?
I've run Xastir aprs in the past 18 months and would
appreciate faster graphics on my model B. Thanks, Bill
K6ACJ
Hi Bill
if you go into Bernards site there are scripts for updating the
packages and he does mention updating and upgrading linux
check this out
--
Kind Regards
Kerry McKenzie
|
Re: Bernards new FBB image
After loading Bernard's new image do we still run apt-get to maintain the system or does apt-get somehow deteriorate the image ?
I've run Xastir aprs in the past 18 months and would appreciate faster graphics on my model B. Thanks, Bill K6ACJ
|
Greetings all
I would just like to publicly thank Bernard for his efforts with the FBB
Raspberry PI images that he has gone to great lengths to produce.
I have just loaded the new image on a PI Model B+ and it is working a treat!
It would have to be one of the easiest distros to setup yet for a Linux
beginner like myself.
Well done and thankyou!
--
Kind Regards
Kerry McKenzie
|
Bernard f6bvp / ai7bg