开云体育

HI Is there a reason to not use the built in SD backup tool? This works well for me. Marty kd8bj

I am not using Hampi but I recently made a backup of my image on my PiZ-W. I think I used instruction I found on Raspberry forum. I backed up to an USB drive then restored to a new uSD. I am

Hello Dave, Yes, you're right.. you can install third party utilities or install the optional WSL sub-system on Windows10 to read/write Linux filesystems but my point is still valid for STOCK

Hi Having used the Raspberry Pi? (3, 4 and Zero) for Amateur TV projects (in particular the Portsdown Digital Amateur TV Transceiver GitHub Link (

David, There are tools that allow a an EXT4 file system to be viewed on a Windows PC for example https://www.diskinternals.com/linux-reader/ but there are other tools…. Dave G4UGM

Hello Carlos, You need to give us more details. Where is your VNC client computer? Is it on the internet somewhere and your Raspberry Pi is behind your home router with a port forward? If so, it

Hey David, A micro SD card with a working copy of Raspberry Pi OS has two partitions on the card: - Partition 1 - FAT32 file system - holds /boot : A windows or Mac computer can read / write

uh NO! The files are not being erased and the SD card is NOT blank! The "few" files that you can see are in the BOOT partition and it is formatted as FAT which windoz can see. The main partition is

SD card

Turn off the pi power supply, unplug it if necessary to make sure the pi is off before pulling as card

Just out of curiosity, what OS are you using when attempting to read the SD card (when it showed "blank")? -Sam KO4KBY

Actually...they are not any more "sensitive" to being removed than other solid-state-devices...which is to say they are NOT as sensitive as you suggest. Wait 30 secs or so.....THEN remove it....(just

Apologies for the potential double-post.? I waited an hour since my last attempt to send: Just out of curiosity, what OS are you using when attempting to read the SD card (when it showed

Did you try putting the card back in the Raspberry Pi before formatting it? Linux, which HamPi runs on usually uses a filesystem that windows does not know how to read... It would be the same if you

I can't seem to be able to maintain a VNC connection for more that a few minutes. Does not matter if the connection is cloud or IP, I am lucky if I can maintain a connection for 10mts. I have the

The RPi uses a different file system that a PC, which is why we use an “Etcher” program to make a few FS… you’d also need to use that Etcher to make a backup Image of the file system (with

After successfully using my Rpi 4 B+ for a few months as part of my homebrew mobile manpack rig I decided to back up the SD card prior to installing a GPS dongle. I did a sudo shutdown -h now and

Hi Everyone, I just came across this Hackaday.com article about a user-modifiable HF SDR that should cost less than $100 USD for the Raspberry Pi

Thanks Steve, will keep an eye on that other group. So many groups, so little time? 73’s Dave WA5TET

Hi Dave, I reported this problem to Dave Freese, W1HKJ, right after 4.1.19 was released. He promptly fixed it and the fix is in the development release, currently at