On Apr 3, 2024, at 6:08 PM, Dave Slotter, W3DJS <slotter@...> wrote:

?

<HamPi Logo Transparent 256x256.bmp>

Hi friends, fellow hams, and HamPi / HamPC / HamIQ??users...

I am pleased to announce that after a long wait,??(32-bit), the comprehensive award-winning ham radio software distribution for the Raspberry Pi, is now available for public download! There have been over 100,000 downloads of HamPi to date across the world.

On March 1, 2022, SourceForge awarded HamPi the Community Choice and SourceForge Favorite awards. Additionally, in late August, 2022, SourceForge awarded HamPi the prestigious Community Leader award.

Direct Download Link:?

NOTE: This is the 32-bit version. The 64-bit version will be released in good time.

All things HamPi / HamPC related:?

If you run into issues, please post to the forum on?/g/Ham-Pi/?first. If you see a bug (defect), please report it on the GitHub issues page at:?

Did you know that HamPi has a wiki? Find it at?

UPGRADING: In order to transition smoothly from HamPi 3.X to HamPi 4.0a1 and preserve your configuration settings, please follow the instructions in the file found in the download area, "UPGRADING_FROM_PRIOR_VERSION.TXT" (This is still a work in progress.)


CHANGELOG:

Version 4.0a1 (March 2024) Release
===================================
- Updated copyright year to 2024
- Update for Raspberry Pi 5 Bookworm
- Broken packages (not installed this version)
? due to Bookworm package breakages:
? - All Soapy SDR drivers (Airspy, bladeRF, HackRF,
? ? Pluto, RTLSDR, SDRPlay3, etc.)
? - LeanSDR, Lysdr, GQRX, CubicSDR, SDR++
? - TrustedQSL
? - FreeDV
? - Dump1090
? - OpenDV
? - DroidStar
? - RpiTX
? - Trlog, Hlog
? - NOAA_APT
? - Callrec
- Packages missing from web (removed):
? - Twclock, TwHamQTH

It is my hope that future versions of Bookworm and updates to these packages will allow me to re-add them to the HamPi distribution. If you need one of these packages, please stay with a previous release of HamPi.

Good luck and 73!

--
-- Dave,?? ? ? ? ? ? ? ? ? ? ? ?Technical Specialist,??--
--?? Lifetime Member:?////?--
--??--

On Mar 20, 2024, at 7:30?PM, dtmenges@... via groups.io <dtmenges@...> wrote:

Update on my project. I have tried both of the following buck converters with good results. I’m only running a fan, USB-Serial, and a soundcard so I’m not loading it much.

The DROC meter should not be believed but its not far off. Both have operated on my bench from the same DC supply that is running my IC-7300 and I haven't noticed any noise.

I have also used them on a Pi 3 and the most significant factor is getting away from off-the-shelf micro USB cords and using cords intended for power.

?

So far no low voltage warnings on the Pi 3.

I have also added a Pi Power from Sunfounder and it seems to be working well. It has some suggested safe shutdown software so I am going to add that to the Pi.

?

Thanks for the suggestions.

--
73
Dave
WB9TEN

Yep, unfortunately, but the cable does use 17awg wires for power, so it definitely can handle the current.

Get

On Mar 7, 2024, at 20:50, "Max via " <yahoo.com@groups.io target=_blank>[email protected]> wrote:

I stand corrected. Open mouth and inset foot. Is it true that the official PS only has a four foot power cord? Sounds rather short.

Max KG4PID

On Thursday, March 7, 2024, 10:04:36 PM CST, N5XMT <dacooley@...> wrote:

You should do a little research on the Pi5. The official Pi5 power supply is PD and the pi does have the circuitry to request the higher power.? The previous versions of the Pi didn't have the circuitry and were unable to take advantage of the PD.

Get

On Mar 7, 2024, at 18:23, "Max via " <yahoo.com@groups.io target=_blank>kg4pid=@groups.io> wrote:

my research says that a QC and PD port has to negotiate to get higher power.? Can a Pi 5 do that???I don't think so.

"Quick Charge requires both the power supply and the device being charged to support it, otherwise charging falls back to the standard USB ten watts."

I'll let someone else decipher that page but my take on it is that it is 3A (15 watts) unless it able to?negotiate to get higher power.

So it would seem it would be better to use one of the PD ports and get?3A (15 watts)?versus the QC port and only get 10 watts.

Please correct me if I'm wrong.

Max KG4PID

On Thursday, March 7, 2024, 07:19:49 PM CST, Tom Hyde NK5H <nk5h.tx@...> wrote:

Ken,

Any USB-C standard power outlet will have the standard 5V, 9V, and 12V pins, you just need one rated at 28W or higher. Your 30W unit will work fine.?

Tom NK5H?

On Thu, Mar 7, 2024 at 12:18 Kenneth R. van Wyk <ken@...> wrote:

I’m running a Pi 5 here, with pretty good successes. It is my intention to build it into a portable PC for radio operations (e.g., POTA, vacations).

One concern I had was regarding power when I’m away from 120V AC. I know it’s been discussed here a lot that we have to use the official Pi 28 Watt charger and such.

HOWEVER, I have a LiFePo4 + solar battery system I built. I included in it a socket with 2 USB-C PD ports rated at 30 Watts each. (I use it to charge my MacBook Pro often.)

I just booted up my Pi 5 on that port and got no warnings about low voltages at all. It just runs. I see no difference between this and the factory power adapter.

I’m not running anything on the USB ports, so the power draw isn’t that much anyway. My configuration is Pi 5 with 8 Gb, Pi OS, Pimoroni NVMe Base board with an NVMe (Sabrent) 1 TB boot drive.

I’ll report back if I encounter any problems, but so far so good.

The socket I put in my LiFePo4 box is this one from Amazon ($20.99):




73 de K0RvW

On Mar 11, 2024, at 6:04 PM, Jack Smith <cyclingsoldier@...> wrote:

?

David,

?

I know he no longer had the ability to link the files due to health issues and wasn’t selling them anymore. But no, I didn’t know that he wasn’t supporting it anymore. Called myself searching the mails!

?

Jack KE4LWT

?

From: [email protected] <[email protected]> On Behalf Of David Lane
Sent: Monday, March 11, 2024 8:53 PM
To: [email protected]
Subject: Re: [RaspberryPi-4-HamRadio] Link to PiGate and PiGate RMS

?

You know Mark stopped supporting PiGate right??

--
David A. Lane, KG4GIY
EC/RO Prince William County?ARES?/RACES
+1.703.628.3868

IM: kg4giy

?

On Mar 11, 2024, at 20:19, Jack Smith <cyclingsoldier@...> wrote:

?Myself and a few others are in the process of "refreshing" our installs of PiGate and PiGate RMS before hurricane season. I can find the new link to the RMS files, but not to the "regular" PiGate files or the supporting documents. Does anyone have those handy?

73,
Jack KE4LWT

?

There was a message a couple of months ago when someone was looking for the code and manuals. Someone may have picked up the hosting, but I don’t think so. I will have to search my archives for the note. It came out on the PiGate list I think??

?

David,

?

I know he no longer had the ability to link the files due to health issues and wasn’t selling them anymore. But no, I didn’t know that he wasn’t supporting it anymore. Called myself searching the mails!

?

Jack KE4LWT

?

From: [email protected] <[email protected]> On Behalf Of David Lane
Sent: Monday, March 11, 2024 8:53 PM
To: [email protected]
Subject: Re: [RaspberryPi-4-HamRadio] Link to PiGate and PiGate RMS

?

You know Mark stopped supporting PiGate right??

--
David A. Lane, KG4GIY
EC/RO Prince William County?ARES?/RACES
+1.703.628.3868

IM: kg4giy

?

On Mar 11, 2024, at 20:19, Jack Smith <cyclingsoldier@...> wrote:

?Myself and a few others are in the process of "refreshing" our installs of PiGate and PiGate RMS before hurricane season. I can find the new link to the RMS files, but not to the "regular" PiGate files or the supporting documents. Does anyone have those handy?

73,
Jack KE4LWT

On Mar 11, 2024, at 21:04, Jack Smith <cyclingsoldier@...> wrote:

?

David,

?

I know he no longer had the ability to link the files due to health issues and wasn’t selling them anymore. But no, I didn’t know that he wasn’t supporting it anymore. Called myself searching the mails!

?

Jack KE4LWT

?

From: [email protected] <[email protected]> On Behalf Of David Lane
Sent: Monday, March 11, 2024 8:53 PM
To: [email protected]
Subject: Re: [RaspberryPi-4-HamRadio] Link to PiGate and PiGate RMS

?

You know Mark stopped supporting PiGate right??

--
David A. Lane, KG4GIY
EC/RO Prince William County?ARES?/RACES
+1.703.628.3868

IM: kg4giy

?

On Mar 11, 2024, at 20:19, Jack Smith <cyclingsoldier@...> wrote:

?Myself and a few others are in the process of "refreshing" our installs of PiGate and PiGate RMS before hurricane season. I can find the new link to the RMS files, but not to the "regular" PiGate files or the supporting documents. Does anyone have those handy?

73,
Jack KE4LWT

?

You know Mark stopped supporting PiGate right??

?Myself and a few others are in the process of "refreshing" our installs of PiGate and PiGate RMS before hurricane season. I can find the new link to the RMS files, but not to the "regular" PiGate files or the supporting documents. Does anyone have those handy?

73,
Jack KE4LWT

On Mar 11, 2024, at 20:19, Jack Smith <cyclingsoldier@...> wrote:

?Myself and a few others are in the process of "refreshing" our installs of PiGate and PiGate RMS before hurricane season. I can find the new link to the RMS files, but not to the "regular" PiGate files or the supporting documents. Does anyone have those handy?

73,
Jack KE4LWT