开云体育

Good suggestions David. Thanks for the help. Scott/KK6DZ

Hello Scott, We all started from zero so if you stick to it, I'm sure you'll get it. I guess the best place I can recommend to get started is here: https://hamvoip.org/ You'll need to do a lot

Thanks Mick. I'm starting to think you're right about HamVoIP. Scott

Depending on what you are trying to do. HamVoIP may be easier to deal with. I looked at ASL (Allstar Link) a while back and if I remember correctly, it won't run on the 64-bit OS. Then again, I could

David - Thanks - I think the fob is working reliably now. Now, as to ASL software... I have no idea where to go next. I am truly a newbie when it comes to RPi, linux, Allstar - all new to me. My

I agree about the Syba and here is the part number:? SD-CM-UAUD I hope that helps. Mick - W7CAT

Hello Scott, How old is this FOB? If it's pretty new, you might have a problem. There are a lot of these units that are very poorly made and if your USB contacts are getting a lot of oxidation now,

David - Thank you for the quick response and info about dmesg. I know almost nothing about Linux commands so every little bit helps. I ended up simply cleaning the usb fob contacts with a pencil

Solved my problem. I guess I just didn't have a good connection between the fob USB contacts and the Pi. Cleaned them up and now see both mic & speaker channels.

Hello Scott, If you open up a terminal window your Raspberry Pi and run the "dmesg" command, you'll see all kinds of kernel logging stuff. Now connect your CM108 sound device and run "dmesg" again.

I am new to the RPi world and have what's probably a "dumb" question. I am not a software guy so please go easy on me. My ultimate goal is to build an Allstar link using a BF-888S and CM108 audio

Asa, Yeah, having two TNCs will be problematic. Docs are attached.? I don't recall you mentioning not having current docs. MarkKD0QYN

Please also recall I do not have the v2.2 doc, I’m working with the v2.1 doc. If the v2.2 doc talks specifically about the SignaLink, I would appreciate having access to a copy. Thank you, Asa

I started with an unaltered image and SignaLink did not work. Not entirely true because I did have to make a mod for gps. But that was it. SignaLink did not work for me out of the box. I had to

Asa, Not sure why you are making so many changes on the PiGate.? It worked with a SignaLink and Direwolf in the standard form.? You're now getting into the area where I can't help because I don't

Update. Today I hooked up the SignaLink to my Winlink station and it worked fine. I then reattached it to the PiGate. It seemed to work fine but had an error. Of note, which seems weird; the ax25

A little progress. Using arecord -l <— that’s an ell I was able to see the Signalink was detected. I made sure the settings in /root/direwolf.config agreed, and changed MYCALL to my own call

I have successfully used PiGate v2.2 to run with a TNC-Pi hat and attached through my FT-897. I am now moving on to testing with a SignaLink. ?Simply plugging it in and rebooting does not make it

David, Yeah, I guess I'll wait. MarkKD0QYN

Hey Mark, It should be worth noting that Debian 12 (Bookworm) was released on June 10, 2023 and it's only a matter of a few months of when a new version of Raspberry Pi OS will be released taking on