开云体育

Hi Dinoburb, Just to clarify, you should add a CAT cable and then you will see the USB inputs you are looking for in FLRIG. 73 David AJ6RE

Hi Dinoburb, I had the same experience, with the exact same configuration: G90, MiniProSC, Rpi mobile. I did the same thing, trying to emulate Julian's setup. In the end it turned out the addition of

Consider using two TNCs? One for 1200 and one for 9600? NinoTNC does both speeds and is only $30, build it yourself.

The TNC-Pi9k6 is dual mode, and can switch modes with a few simple commands.? However, the radio is another problem, switching from 1200 to 9600 baud. The latest PiGate software switches the TNC

Hello Don, There used to be a write up on NW Digital's website of how to do this but it seems to be withdrawn. That said, there are some pros/cons to trying to do this and they can be found in the

I'm not even sure that this is the correct group to ask this. we are looking for a tnc that can "switch" itself from 1200 to 9600 baud. we know that the Kantronics 9612 ex can, but I don't really

Anyone experiment around with the?iqaudio dac pro hat? ?I am looking at rebuilding my iq64 and started hooking it up. ?Looking for any lessons learned. thanks Tom AE5NF

I don’t know Python but aren’t microPython and ciruitPython basically the same thing? https://learn.adafruit.com/adafruit-max98357-i2s-class-d-mono-amp/circuitpython-wiring-test

At this point, I really just want to make sounds. Eventually, I want to try playing .mp3s.

Well, this is a Pico, the new, little RPi microcontroller.

Hui Dan, I'm curious... why use Micropython on a Raspberry Pi when you can use full blown Python ? 73 - Bill KA8VIT/W8COD ________________________________ Sent: Tuesday, August 17, 2021 8:39

I finally got hamclock to work, but i cant get a full screen on my ebay 7;inch touchscreen I tried all the 4 resolutions with the make - j command and screen stays the same when i hit the up v

Hi Dan, Are you looking for something like midi or a music synthesizer? I am interested in that, too. 73, Bill KU8H bark less - wag more

https://www.g4zlp.co.uk/Instructions/MiniProSC/MiniProSC.pdf 73

I'm working on a project (well, that's not strictly trure; I'm just playing around with it :) ) that's not strictly ham-radio related.It uses a Raspberry Pi Pico and a MAX98357 D-A/amp board (

Most of the BAP users running the G90 hang out in this forum /g/KM4ACK-Pi/topics I don't own the MiniProSC but I believe it is similar to the Signalink. Look for the sound card that

I would suggest getting a terminal window up, and typing aplay -l and seeing what you get, and then arecord -l and looking at the output from that. The output can still take a bit of deciphering,

I have been attempting to set-up a G90, MiniProSC, Raspberry Pi remote set-up and I am flummoxed (technical term) on what the MiniPro returns as the sound card. ?When attempting to set-up WSJX I use

Good luck and try not to jump to conclusions about the feasibility of an OS too soon... in many cases, the problem is the user. 73 de heinz, VK2STM

Mark, David: Thanks for your help. I found something on the web last night about 2.4g wifi issues maybe being caused by HDMI cables. In the living room to TV, I am running HDMI this is where I did the