-----Original Message-----
From:
[email protected] <
[email protected]> On Behalf Of John Sunderson
Sent: Monday, January 29, 2024 20:29
To:
[email protected]Subject: Re: [RaspberryPi-4-HamRadio] Pi5 12v supply
There seems to be confusion about PD for the Pi 5.
Here are a couple of references - make sure you are talking about PD or not!
" "
" "
John Sunderson, Jr.
Cell 626-399-6359
drbatch@...
-----Original Message-----
From:
[email protected] <
[email protected]> On Behalf Of Michael WA7SKG
Sent: Saturday, January 27, 2024 8:50 PM
To:
[email protected]Subject: Re: [RaspberryPi-4-HamRadio] Pi5 12v supply
Gotta say, this thread has been entertaining. From what I can tell, the
RPi5 wants USB-C PD power. The "Official RPi5 Power Supply" provides PD (27W), but is a wall-wart only. The OP I believe wanted something to run from 12V. So...
This takes 9-24VDC in and gives USB-A and USB-C/PD outputs. It is hardwired in to whatever power source you have.
Chargeit! Mini 75W Dual Port USB-A & USB-C PD Charger w/ PPS & QC4.0 Support
This is a cigarette lighter/power point plug in that gives basically the same thing, a USB-A(QC 3.0) and a USB-C(PD) outputs.
USB C Car Charger 5 Pack,
I believe either one of these should power your RPi5. Personally, I think I would go with the CoolGear item as it supports a higher output (75W combined) than the Bangfun (20W) device.
Michael WA7SKG
Kelly K7MHI via groups.io wrote on 1/27/24 2:31 PM:
Sheesh haha this group …
David have you found a 5a PD USB C yet
I have not found one yet - thanks for the tip on the POE hat it’s not
13v but interesting - I could link you to the details I was
referencing but - I’m gonna walk on this thread
if I find something I will make sure to post it here we will likely
all watch some YouTuber post it at the same time hihi
happy field day all Kelly saying 73
--
KG6TPA - drbatch@...
