|
There seems to be confusion about PD for the Pi 5.
toggle quoted message
Show quoted text
Here are a couple of references - make sure you are talking about PD or not! " " " " John Sunderson, Jr. Cell 626-399-6359 drbatch@... -----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Michael WA7SKG Sent: Saturday, January 27, 2024 8:50 PM To: [email protected] Subject: Re: [RaspberryPi-4-HamRadio] Pi5 12v supply Gotta say, this thread has been entertaining. From what I can tell, the RPi5 wants USB-C PD power. The "Official RPi5 Power Supply" provides PD (27W), but is a wall-wart only. The OP I believe wanted something to run from 12V. So... This takes 9-24VDC in and gives USB-A and USB-C/PD outputs. It is hardwired in to whatever power source you have. Chargeit! Mini 75W Dual Port USB-A & USB-C PD Charger w/ PPS & QC4.0 Support This is a cigarette lighter/power point plug in that gives basically the same thing, a USB-A(QC 3.0) and a USB-C(PD) outputs. USB C Car Charger 5 Pack, I believe either one of these should power your RPi5. Personally, I think I would go with the CoolGear item as it supports a higher output (75W combined) than the Bangfun (20W) device. Michael WA7SKG Kelly K7MHI via groups.io wrote on 1/27/24 2:31 PM: Sheesh haha this group … -- KG6TPA - drbatch@... |
