GM Larry and all.
I used the Geekworm P394 9 layer acrylic case that I found when searching on Amazon. I removed an acrylic finger from one of the layers that interfered with one of the support standoffs behind the USB ports for the SSD HAT. The Pineberry Pi HAT fits well over the active RPI cooler. You will need some extra M3 standoffs to put the top plate of the case on.
I don't recall seeing the P573 aluminum case - after looking at the pictures that case is not compatible with the RPI active cooler or the SSD HATs - those cooling pods that stick into the interior of the case are the problem.
I just wanted something to keep the bottom / top of the board protected.
The Geekworm NVME SSD HATs are certainly cheaper than the Pineberry Pi boards.
I have not yet mounted the bottom 80 mm Pinebery Pi HAT to an RPI5.
Merry Christmas all.
Edd - KD5M
