Trying to get gpredict and wsjtx to work together. Using the rigctl command above (with a different port # and baud rate) seems to work fine in gpredict. I had read that for rigctl to be used by WSJTX you have to select that as the ¡°rig¡± in the radio config tab. However, it¡¯s a Hamlib/rigctl line and now I¡¯m getting a hamlib protocol error (even though gpredict is working fine, and also choosing FT817 in WSJTX seems to work ¡ but by itself¡gpredict and WSJTX seem to fight with each other if both are running while ¡°FT817¡± is selected in WSJTX).
Any thoughts appreciated.
Rob KA2CZU
Rob