Try resetting your home router so it has the opportunity to rebuild its routing table.?
You may, just as a good practice, restart all your other home or LAN devices at the same time if possible.?
Such problems often happen because one device gets turned off and later back on, or stays on while another device gets reset.?
Essentially, device1 may have no knowledge that device2 has a different or changed IP (or other networking config parameter such as an authentication token) which expired.?
This may or may not be what happened in this case, but surely it was working before, so starting with a clean state will allow all devices to have a new discovery of all other devices.?
Good luck. And if this doesn¡¯t fix it, write back because the results are another clue which will prompt other questions.?
»å²¹±¹±ð¡
I have never run into this situation whereby I can only communicate with my Flex 6500 via my Raspberry Pi 4B on my Wi-Fi connection using tailscale.? I am unable to reach the radio using my wired network.
I have tried several pc¡¯s connected to my wired network running both windows 10 and 11 with no success.? All of my Wi-Fi devices (iPhone, iPad, Wi-Fi connected laptop) ?communicate with the radio with no problem.
I would appreciate any advice.
Thanks,
Bob, KN4HH?
--
dave...
David B. Donaldson
dave@...443-618-2454
Speak as if you understand from the beginning, you can't take it back. dbd
