I have loaded wsjtx_2.4.0...? It runs fine.?
I can't get Audio {C-Media does not show either wsjt-x or Pulse}
to work... {works fine 32 bit}
pi@rasp64:~ $
lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 067b:2303 Prolific Technology, Inc.
PL2303 Serial Port? <--- GPS
Bus 001 Device 007: ID 0d8c:0014 C-Media Electronics, Inc.
Audio Adapter (Unitek Y-247A)? <--- AUDIO
Bus 001 Device 006: ID 0403:6001 Future Technology Devices
International, Ltd FT232 Serial (UART) IC? <--- CAT
Bus 001 Device 005: ID 046d:c52b Logitech, Inc. Unifying
Receiver? <--- keyboard/mouse
Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
any ideas?? I
have tried with/without Pulse Audio...?
The only thing I have NOT tried is to swap the USB audio
module.? BUT, it shows (see above).
All I have changed is 32 bit to 64 bit...?? (all 64 bit
packages are up to date)
AND I thought I had audio working with Raspian.? I have also
tried ubuntu 64 bit...
BAP: BTW, conky
does not show temp.?? I have added temp to the status bar.
73, steve WB3LGC
On 5/22/21 2:50 PM, David Ranch wrote:
toggle quoted message
Show quoted text
Pre-built ARM64 packages of Raspberry Pi OS is
posted on the WSJT-X website:
??
??
An interesting write up on deep decode times on various
Raspberry Pi hardware versions can be seen here but all results
there are 32bit only:
??
--David
KI6ZHD
On 05/22/2021 10:37 AM, N5XMT wrote:
Be curious to see back to back tests of the 32
bit build and the 64 bit for any differences in speed on the
FT8.? The libraries you had to download to make the compile
scripts work were all 32 bit.
On May 22, 2021, at 00:33, "Kelly
Keeton via "
<
yahoo.com@groups.io
target=_blank>
[email protected]> wrote:
I downloaded
the latest May2021 raspberry64bOS (still in beta) and
ran the script things seem to work for the most part
?
FL-suite
needed a manual install of
> libfltk1.3-dev Libjpeg-dev libxcursor-dev
libfontconfig1-dev libxinerama-dev libxft-dev
libsamplerate-dev libsndfile1-dev libportaudio19-dev?
to run the
automated compile scripts, after added things seem ok!
qsstv has a hamlib-dev problem and JS8 package has issues it
appears.
anyway I went down the path for better performance with FT8
