|
Don Munson
¿ªÔÆÌåÓýEXCELLENT!!? ? So after six tries because it is early and I simply can¡¯t type (and I have learned Linux is very unforgiving on typing!) I got the following: ? Using Serial Port /dev/serial0? retrying ? and a presentation of the parameters.?? ? Now at least I know they are talking to each other ? ? I am not sure why it worked but it did.? I am going to presume that somehow the putty connection to the pi was using the serial port?? Although how it still connects (as does VNC) confuses me ¨C but no matter. ? The obvious next question is where do I go from here for reading about how to configure and use this board? ? Don, W4GFQ ? From: [email protected] <[email protected]> On Behalf Of Mark Griffith via groups.io
Sent: Friday, June 26, 2020 7:10 AM To: [email protected] Subject: Re: [RaspberryPi-4-HamRadio] Help with TNC9k6 setup ? Don, ? First, you'll also need to use the raspi-config utility to enable the console serial port, but disable console login. ? Run "sudo raspi-config" ? Then go to menu 5, Interfacing Options, then menu P6, and disable the login shell over the serial port. ? On the next screen, keep the serial port enabled. ? Save these and finish. ? Now try "sudo pitnc-getparams /dev/serial0 0" ? This works the same with the TNC-Pi2 or the TNC-Pi9k6 and will be the same with the TNC-Pi3 once MFJ starts selling them. ? Mark KD0QYN ? ? On Friday, June 26, 2020, 1:01:22 AM CDT, Don Munson <w4gfq@...> wrote: ? ? First I am an operator and not a technician.? I can follow directions and to some extent do enough to get myself in trouble.? Having said that I purchased a TNC9k6 and have it running wiht a Raspberry PI 3B+.? Followed directions at (downloaded the pitnc files, set them in the directory and set permission to execute by owner.? Verified with ls -l that all permissions and owner/group ids as well as my logge din user are all setup per the text. |
