Re: Help with TNC9k6 setup
|
Don:
Just covering the obvious here but the TNC-Pi is a completely different product than the TNC-Pi9k6 and the instructions for the TNC-Pi are not applicable to the -Pi9k6.?
Steve N8GNJ
On Thu, Jun 25, 2020 at 23:01 Don Munson < w4gfq@...> wrote: First I am an operator and not a technician.? I can follow directions and to some extent do enough to get myself in trouble.? Having said that I purchased a TNC9k6 and have it running wiht a Raspberry PI 3B+.? Followed directions at (downloaded the pitnc files, set them in the directory and set permission to execute by owner.? Verified with ls -l that all permissions and owner/group ids as well as my logge din user are all setup per the text.
when I run the ./pitnc_getparams /dev/serial0 0 - I get the notation that RPi is using Serial 0 then Com Open Failed: permission denied.
I'm at a loss.? Searching here provides a slew of comm errors dated years back that are not trying serial but? ./pitnc_getparams 0 0 - when I try that it defaults to a TTY device (AAM0?) and simply repeats "retrying" which purportedly means a configuration issue.? But what configuration it is straight out of the setup - I've tweaked nothing in the RPI configuration.
Help?
Don, W4GFQ
|
