开云体育

I redid the sudo raspi-config > serial Etc.

pi@raspberrypi:~/pitnc $ sudo ./pitnc_getparams /dev/serial0 0

Using Serial port /dev/serial0
retrying...

? ?TNC Software Version ? ? ? ? ? 8
01 TXDelay - Zero means use ADC ?50
02 Persistance ? ? ? ? ? ? ? ? ?255
03 Slottime (in 10 mS) ? ? ? ? ?255
04 TXTail ? ? ? ? ? ? ? ? ? ? ? 255
05 Full Duplex - Not used ? ? ? 255
06 Our Channel (Hex) ? ? ? ? ? ? ff
07 I2C Address (0 = async) Hex ? ff
08 Mode Speed ? ? ? ? ? ? ? ? ?25500
09 RX Level (Config) ? ? ? ? ? ?255
10 TX Level ? ? ? ? ? ? ? ? ? ? 255
11 RX Level (Actual) ? ? ? ? ? ?255
13 Centre Freq ? ? ? ? ? ? ? ? 2550
8 8 32 ff ff ff ff ff ff ff ff ff ff ff cd c0 sum 0
pi@raspberrypi:~/pitnc $

Not all I need is to get APRS and Figure out Pat Configure,?

73

Don va7dgp/va7qu

Don Poaps

New Westminster, BC

VA7DGP DATA

VA7QU ? VOICE

Winlink: va7qu@...

Subject://wl2k ? ? ? ? ??

? ? ? ? ? ? ? ? ? ??

??

?

On Wed, Jun 24, 2020 at 12:32 AM John Wiseman <john.wiseman@...> wrote:

Unfortunately that instruction is also now out of date.

The correct way is now to use raspi-config Interfacing Options/Serial to disable login on the serial port and enable the port.

73,
John G8BBPQ

On 24/06/2020 05:55, Don Poaps wrote:

Tim I finally see what you meant by Note

? Note added 12/4/2018: Some individuals have reported that there is a problem with the November, 2018 revision of Raspbian that results in the serial port not being accessible. You would notice this, for example, if you run pitnc_getparams and you keep getting “retrying…” instead of the menu. In this case you need to edit the config.txt file in the /boot/ directory. You can do this by running the following from the command line: sudo leafpad /boot/config.txt Add the following line at the bottom of this file: dtoverlay=pi3-miniuart-bt This problem seems to be fixed with more recent versions of the Stretch version of Raspian.? ?

Thank You.

I thought Buster would have fixed that issue.?

73

Don va7dgp/va7qu

Don Poaps

New Westminster, BC

VA7DGP DATA

VA7QU ? VOICE

Winlink: va7qu@...

Subject://wl2k ? ? ? ? ??

? ? ? ? ? ? ? ? ? ??

??

?

On Tue, Jun 23, 2020 at 1:47 PM Tim via <the_fro_god=[email protected]> wrote:

Did you try the Note added 12/4/2018 stuff?