开云体育

Don,

If your RED LED power light is flashing, your power supply is very weak.? It needs to be steady on all the time.? If adding an external USB device like a TNC-X causes it to start flashing, then again, the power supply is too weak.

Mark

KD0QYN

On Tuesday, June 23, 2020, 5:21:32 PM CDT, Don Poaps <va7dgp@...> wrote:

Tad?

that's one of the first syntaxes I used. The yellow light is flashing on the Pi Hat. All of the lights blink when power is applied.

Putting it to bed for a while. If I plugged my USB tnc-x I get it to start in not type.

later

Don va7dgp/va7qu

On Tue., Jun. 23, 2020, 1:00 p.m. Tadd KA2DEW in NC via <tadd=[email protected]> wrote:

Try doing sudo before the command. ??

On Jun 23, 2020, at 3:58 PM, Don Poaps <va7dgp@...> wrote:

I've been reading the setup from tncpi pdf from off the tnc-x website.

I've downloaded the zipped files,? there are now in the folder pitnc.

Both files permission are for Owner?

I keep getting retrying.

If I do ls /dev/serial*

It shows /dev/serial0 and /dev/serial1

So sort of lost as to where to go next

73?

Don