¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

any one have software on fopply for an/pcr-139 racal programming


repairmantoo
 

MA 6941 PC programming cable - allows a laptop to program the
frequencies and other variables such as Receive Frequency, Transmit
Frequency, CTCSS Squelch Tones, Data, was needing this software
cannt seem to find it at all. its about 1.5 mb in size


repairmantoo
 

sorry its AN/PRC-139


 

I have some PRC134 radios which are almost the same as the PRC139.
Unfortunately I have just the MX-1151u hand programmer. I am also
looking for the PC based software. However you should know that even
if you do find the software, you will need the special PC to radio
cable ( connects to the side of the radio).
I believe this cable has some active components in the db9 computer
connector, so is not just a simple lead between pc and radio.

It is very very difficult to find programming information for these
radios; let me know if you have any radios or PRC139 stuff for sale.

Vincent


ernestlabaco
 

Hello Vincent,

I just joined the group in hopes in finding info on Racal portables and your message cought my attention. I too have a PRC-134 but with an RF board problem. I was wondering if you have any resources on '134 spares? Do you repair boards?

Regards,

Ernest

--- In Racal-manpacks@..., "Vincent Borg" <schatzperson@...> wrote:

I have some PRC134 radios which are almost the same as the PRC139.
Unfortunately I have just the MX-1151u hand programmer. I am also
looking for the PC based software. However you should know that even
if you do find the software, you will need the special PC to radio
cable ( connects to the side of the radio).
I believe this cable has some active components in the db9 computer
connector, so is not just a simple lead between pc and radio.

It is very very difficult to find programming information for these
radios; let me know if you have any radios or PRC139 stuff for sale.

Vincent