开云体育

Does it fit the Syncal 30 / TRA 931 ? Do you still have the plugs?

Dear all, I recently acquired a Syncal 30 / TRA931 and am in the process of restoring the radio cosmetically. As a newby, I am in seach of the following: 1. 2 frequency selection knobs 2. 3 pieces

Stuart, All zeros is the reset state of the cpu. It is hard to guess exactly what is wrong but I would guess a tantalum somewhere is pulling down one of the supply rails. Sta

Hi Stuart, Did you check the battery? There is an active discussion on the RA6790/GM list now about the 1792. Perhaps you should join that list. Lots of help

Hi Group I have an Ex Telford Electronics 1792, which I have had for approx 4 yrs now, purchased off the Bay, it has a mod on back for two terminals which take the input voltage currently

Hi Group Slightly off topic, On the subject of my driver GK 203 A for Alpha version driver for the GA 485 1 KW station, it is missing it's handles that you use to draw the unit in and out

Hi Group Looking for a couple of 25 way Unitor Plugs for my Redifon GA 485, also anyone have Knowledge of the ACU 9??? Stuart G0TBI QTHR

... for the large number of notifications of new files on the site. These were sent even though the box to notify members of new files had NOT been ticked. regards, Bob

Thanks to Julian, the 17-page Operators Manual for this equipment is now in the "Files" section. regards, Bob

Hello, I joined your group to find out more about a RACAL receiver type A317, which I inhereted from my family. Does anyone has specs eand/or history of this type? I do have pictures, but do not know

Item No: 270618135198,270618205793 and 270618204117. Thanks

Hi there - I have an operator's manual for this kit which we used to put on our Embassies. I will scan it and email it to you. Best regards, Julian.

Hello I'm looking for any paperwork on this radio. Regards Gerald G7HNM

Hi, I am looking for any information on the Racal Kaynard portable data transceiver which seems to be an earlier version or prototype for the FRM 4750. The Kaynard (like the 4750) consists of three

I left off his contact details: Vic Tuff G7PYR Tel: +44 (0) 7802 449658

Vic just posted this in another group. If anyone takes him up on his offer I would be interested in any accessories for the PTR4400/RT-F200 that they don't want. Howard VK4BS Guys, I have around 30

Vic just posted this in another group. If anyone takes him up on his offer I would be interested in any accessories for the PTR4400/RT-F200 that they don't want. Howard VK4BS Guys, I have around 30

We have 4 unit full ser Racal PRM-4021, but we have problem with TX. Please find the attachement. ? ? Aris YC1RSC

Patricio Diez Butty wrote: 3 cells Patricio, so 3.6 Volts nominally. I made replacements from 3 x 100 mAH NiMH button cells potted in epoxy similar to the originals. I even copied the original

Thank you Dan for the battery cell info. I take it away from the unit. Wich voltage does it have? Best regards, Patricio Lic. Patricio Diez Butty --- El lun 2-ago-10, Dan Rae <danrae@...>