Re: Racal Cougar Battery Pinouts
Spence
Will call you
Stuart
-----Original Message-----
From: Spence M0STO via Groups.Io <unavailable.equal@...>
To: RacalRadio < [email protected]>
Sent: Wed, 18 Dec 2019 16:27
Subject: Re: [RacalRadio] Racal Cougar Battery Pinouts
Yes ordered but doubt they have been dispatched. Not cheap but not exactly expensive. ?33.69 + VAT each. Do you want one as I can just get Sam to order me some
More?
Spencer
have you ordered yet, I could do with a couple if you can help, no doubt will CU in Feb if not before?
Stuart
TBI
-----Original Message-----
From: Spence M0STO via Groups.Io < unavailable.equal@...>
To: RacalRadio < [email protected]>
Sent: Wed, 18 Dec 2019 13:10
Subject: Re: [RacalRadio] Racal Cougar Battery Pinouts
Not sure about those. Always run mine from a linear PSU
De Spence M0STO
On 18 Dec 2019, at 13:01, Robin Maddison < robin@...> wrote:
Well done. ? ?How about the bigger SMT batts?
?
Down to 20 now Robin. About to place an order.
On 18 Dec 2019, at 11:26, Robin Maddison < robin@...> wrote:
They had 80 in stock at the beginning of the year. They are good too!
?
Awesome Robin and thanks for the quick reply. I shall give them a try.
Kind regards de Spence M0STO
On 18 Dec 2019, at 07:38, Robin Maddison < robin@...> wrote:
4515 nimh batts are available?
From.?
?Dear fellow radio amateurs, I am the owner of about 6 x PRM4515L’s which have been refurbed and repaired. I’m also fortunate enough to own a handbag programmer, 3 battery conditioner chargers, ECUs and SMTs alike however the one thing I’m surprisingly short of is batteries. I have a few primary cells that are unissued and a handful of secondary Nicads. Problem is that of the 5 or so secondary cells that I’ve tried to disassemble to re’cell have always just crumbled. Most of the time they are also potted and a nightmare to break out. I know that the internals have a diode and a thermistor however the wiring is super complicated for something so very simple. Does anyone have a correct schematic and values of the diode and thermistor as good clean secondary cells are very, very hard to come by.
Many thanks, kind regards,
De Spence M0STO
|
Re: Racal Cougar Battery Pinouts
Stuart, send me a DM or text off the reflector and I will get this sorted for you.
toggle quoted message
Show quoted text
On 18 Dec 2019, at 16:27, Spence M0STO via Groups.Io < unavailable.equal@...> wrote: Yes ordered but doubt they have been dispatched. Not cheap but not exactly expensive. ?33.69 + VAT each. Do you want one as I can just get Sam to order me some More?
Spencer
have you ordered yet, I could do with a couple if you can help, no doubt will CU in Feb if not before?
Stuart
TBI
-----Original Message-----
From: Spence M0STO via Groups.Io < unavailable.equal@...>
To: RacalRadio < [email protected]>
Sent: Wed, 18 Dec 2019 13:10
Subject: Re: [RacalRadio] Racal Cougar Battery Pinouts
Not sure about those. Always run mine from a linear PSU
De Spence M0STO
On 18 Dec 2019, at 13:01, Robin Maddison < robin@...> wrote:
Well done. ? ?How about the bigger SMT batts?
?
Down to 20 now Robin. About to place an order.
On 18 Dec 2019, at 11:26, Robin Maddison < robin@...> wrote:
They had 80 in stock at the beginning of the year. They are good too!
?
Awesome Robin and thanks for the quick reply. I shall give them a try.
Kind regards de Spence M0STO
On 18 Dec 2019, at 07:38, Robin Maddison < robin@...> wrote:
4515 nimh batts are available?
From.?
?Dear fellow radio amateurs, I am the owner of about 6 x PRM4515L’s which have been refurbed and repaired. I’m also fortunate enough to own a handbag programmer, 3 battery conditioner chargers, ECUs and SMTs alike however the one thing I’m surprisingly short of is batteries. I have a few primary cells that are unissued and a handful of secondary Nicads. Problem is that of the 5 or so secondary cells that I’ve tried to disassemble to re’cell have always just crumbled. Most of the time they are also potted and a nightmare to break out. I know that the internals have a diode and a thermistor however the wiring is super complicated for something so very simple. Does anyone have a correct schematic and values of the diode and thermistor as good clean secondary cells are very, very hard to come by.
Many thanks, kind regards,
De Spence M0STO
|
Re: Racal Cougar Battery Pinouts
Yes ordered but doubt they have been dispatched. Not cheap but not exactly expensive. ?33.69 + VAT each. Do you want one as I can just get Sam to order me some
toggle quoted message
Show quoted text
On 18 Dec 2019, at 16:04, Stuart Mckinnon via Groups.Io < stuartjmckinnon@...> wrote:
Spencer
have you ordered yet, I could do with a couple if you can help, no doubt will CU in Feb if not before?
Stuart
TBI
-----Original Message-----
From: Spence M0STO via Groups.Io < unavailable.equal@...>
To: RacalRadio < [email protected]>
Sent: Wed, 18 Dec 2019 13:10
Subject: Re: [RacalRadio] Racal Cougar Battery Pinouts
Not sure about those. Always run mine from a linear PSU
De Spence M0STO
On 18 Dec 2019, at 13:01, Robin Maddison < robin@...> wrote:
Well done. ? ?How about the bigger SMT batts?
?
Down to 20 now Robin. About to place an order.
On 18 Dec 2019, at 11:26, Robin Maddison < robin@...> wrote:
They had 80 in stock at the beginning of the year. They are good too!
?
Awesome Robin and thanks for the quick reply. I shall give them a try.
Kind regards de Spence M0STO
On 18 Dec 2019, at 07:38, Robin Maddison < robin@...> wrote:
4515 nimh batts are available?
From.?
?Dear fellow radio amateurs, I am the owner of about 6 x PRM4515L’s which have been refurbed and repaired. I’m also fortunate enough to own a handbag programmer, 3 battery conditioner chargers, ECUs and SMTs alike however the one thing I’m surprisingly short of is batteries. I have a few primary cells that are unissued and a handful of secondary Nicads. Problem is that of the 5 or so secondary cells that I’ve tried to disassemble to re’cell have always just crumbled. Most of the time they are also potted and a nightmare to break out. I know that the internals have a diode and a thermistor however the wiring is super complicated for something so very simple. Does anyone have a correct schematic and values of the diode and thermistor as good clean secondary cells are very, very hard to come by.
Many thanks, kind regards,
De Spence M0STO
|
Re: Racal Cougar Battery Pinouts
Spencer
have you ordered yet, I could do with a couple if you can help, no doubt will CU in Feb if not before?
Stuart
TBI
-----Original Message-----
From: Spence M0STO via Groups.Io <unavailable.equal@...>
To: RacalRadio < [email protected]>
Sent: Wed, 18 Dec 2019 13:10
Subject: Re: [RacalRadio] Racal Cougar Battery Pinouts
Not sure about those. Always run mine from a linear PSU
De Spence M0STO
On 18 Dec 2019, at 13:01, Robin Maddison < robin@...> wrote:
Well done. ? ?How about the bigger SMT batts?
?
Down to 20 now Robin. About to place an order.
On 18 Dec 2019, at 11:26, Robin Maddison < robin@...> wrote:
They had 80 in stock at the beginning of the year. They are good too!
?
Awesome Robin and thanks for the quick reply. I shall give them a try.
Kind regards de Spence M0STO
On 18 Dec 2019, at 07:38, Robin Maddison < robin@...> wrote:
4515 nimh batts are available?
From.?
?Dear fellow radio amateurs, I am the owner of about 6 x PRM4515L’s which have been refurbed and repaired. I’m also fortunate enough to own a handbag programmer, 3 battery conditioner chargers, ECUs and SMTs alike however the one thing I’m surprisingly short of is batteries. I have a few primary cells that are unissued and a handful of secondary Nicads. Problem is that of the 5 or so secondary cells that I’ve tried to disassemble to re’cell have always just crumbled. Most of the time they are also potted and a nightmare to break out. I know that the internals have a diode and a thermistor however the wiring is super complicated for something so very simple. Does anyone have a correct schematic and values of the diode and thermistor as good clean secondary cells are very, very hard to come by.
Many thanks, kind regards,
De Spence M0STO
|
Re: Racal Cougar Battery Pinouts
Not sure about those. Always run mine from a linear PSU
toggle quoted message
Show quoted text
On 18 Dec 2019, at 13:01, Robin Maddison < robin@...> wrote: Well done. ? ?How about the bigger SMT batts? ? Down to 20 now Robin. About to place an order. On 18 Dec 2019, at 11:26, Robin Maddison < robin@...> wrote: They had 80 in stock at the beginning of the year. They are good too! ? Awesome Robin and thanks for the quick reply. I shall give them a try.
Kind regards de Spence M0STO On 18 Dec 2019, at 07:38, Robin Maddison < robin@...> wrote: 4515 nimh batts are available? From.?
?Dear fellow radio amateurs, I am the owner of about 6 x PRM4515L’s which have been refurbed and repaired. I’m also fortunate enough to own a handbag programmer, 3 battery conditioner chargers, ECUs and SMTs alike however the one thing I’m surprisingly short of is batteries. I have a few primary cells that are unissued and a handful of secondary Nicads. Problem is that of the 5 or so secondary cells that I’ve tried to disassemble to re’cell have always just crumbled. Most of the time they are also potted and a nightmare to break out. I know that the internals have a diode and a thermistor however the wiring is super complicated for something so very simple. Does anyone have a correct schematic and values of the diode and thermistor as good clean secondary cells are very, very hard to come by.
Many thanks, kind regards,
De Spence M0STO
|
Re: Racal Cougar Battery Pinouts
Well done. ? ?How about the bigger SMT batts?
toggle quoted message
Show quoted text
On 18 Dec 2019, at 12:27, Spence M0STO via Groups.Io <unavailable.equal@...> wrote:
? Down to 20 now Robin. About to place an order. On 18 Dec 2019, at 11:26, Robin Maddison < robin@...> wrote: They had 80 in stock at the beginning of the year. They are good too! ? Awesome Robin and thanks for the quick reply. I shall give them a try.
Kind regards de Spence M0STO On 18 Dec 2019, at 07:38, Robin Maddison < robin@...> wrote: 4515 nimh batts are available? From.?
?Dear fellow radio amateurs, I am the owner of about 6 x PRM4515L’s which have been refurbed and repaired. I’m also fortunate enough to own a handbag programmer, 3 battery conditioner chargers, ECUs and SMTs alike however the one thing I’m surprisingly short of is batteries. I have a few primary cells that are unissued and a handful of secondary Nicads. Problem is that of the 5 or so secondary cells that I’ve tried to disassemble to re’cell have always just crumbled. Most of the time they are also potted and a nightmare to break out. I know that the internals have a diode and a thermistor however the wiring is super complicated for something so very simple. Does anyone have a correct schematic and values of the diode and thermistor as good clean secondary cells are very, very hard to come by.
Many thanks, kind regards,
De Spence M0STO
|
Re: Racal Cougar Battery Pinouts
Down to 20 now Robin. About to place an order.
toggle quoted message
Show quoted text
On 18 Dec 2019, at 11:26, Robin Maddison < robin@...> wrote: They had 80 in stock at the beginning of the year. They are good too! ? Awesome Robin and thanks for the quick reply. I shall give them a try.
Kind regards de Spence M0STO On 18 Dec 2019, at 07:38, Robin Maddison < robin@...> wrote: 4515 nimh batts are available? From.?
?Dear fellow radio amateurs, I am the owner of about 6 x PRM4515L’s which have been refurbed and repaired. I’m also fortunate enough to own a handbag programmer, 3 battery conditioner chargers, ECUs and SMTs alike however the one thing I’m surprisingly short of is batteries. I have a few primary cells that are unissued and a handful of secondary Nicads. Problem is that of the 5 or so secondary cells that I’ve tried to disassemble to re’cell have always just crumbled. Most of the time they are also potted and a nightmare to break out. I know that the internals have a diode and a thermistor however the wiring is super complicated for something so very simple. Does anyone have a correct schematic and values of the diode and thermistor as good clean secondary cells are very, very hard to come by.
Many thanks, kind regards,
De Spence M0STO
|
Re: Racal Cougar Battery Pinouts
They had 80 in stock at the beginning of the year. They are good too!
toggle quoted message
Show quoted text
On 18 Dec 2019, at 10:51, Spence M0STO via Groups.Io <unavailable.equal@...> wrote:
? Awesome Robin and thanks for the quick reply. I shall give them a try.
Kind regards de Spence M0STO On 18 Dec 2019, at 07:38, Robin Maddison < robin@...> wrote: 4515 nimh batts are available? From.?
?Dear fellow radio amateurs, I am the owner of about 6 x PRM4515L’s which have been refurbed and repaired. I’m also fortunate enough to own a handbag programmer, 3 battery conditioner chargers, ECUs and SMTs alike however the one thing I’m surprisingly short of is batteries. I have a few primary cells that are unissued and a handful of secondary Nicads. Problem is that of the 5 or so secondary cells that I’ve tried to disassemble to re’cell have always just crumbled. Most of the time they are also potted and a nightmare to break out. I know that the internals have a diode and a thermistor however the wiring is super complicated for something so very simple. Does anyone have a correct schematic and values of the diode and thermistor as good clean secondary cells are very, very hard to come by.
Many thanks, kind regards,
De Spence M0STO
|
Re: Racal Cougar Battery Pinouts
Awesome Robin and thanks for the quick reply. I shall give them a try.
Kind regards de Spence M0STO
toggle quoted message
Show quoted text
On 18 Dec 2019, at 07:38, Robin Maddison < robin@...> wrote: 4515 nimh batts are available? From.?
?Dear fellow radio amateurs, I am the owner of about 6 x PRM4515L’s which have been refurbed and repaired. I’m also fortunate enough to own a handbag programmer, 3 battery conditioner chargers, ECUs and SMTs alike however the one thing I’m surprisingly short of is batteries. I have a few primary cells that are unissued and a handful of secondary Nicads. Problem is that of the 5 or so secondary cells that I’ve tried to disassemble to re’cell have always just crumbled. Most of the time they are also potted and a nightmare to break out. I know that the internals have a diode and a thermistor however the wiring is super complicated for something so very simple. Does anyone have a correct schematic and values of the diode and thermistor as good clean secondary cells are very, very hard to come by.
Many thanks, kind regards,
De Spence M0STO
|
For sale MARCONI SCIMITAR H hopper
? Hi to All my friends, I apologize for the mistake done yesterday, now my mail has the proper object. I have for sell a MARCONI SCIMITAR H, with hopping capacity which can be activated directly from the keyboard without the need for fill-gun. The radio work OK an it is quite rare. ?Here you find two photos that I made in 2009 when I bought the radio, if somebody is interested I can do a video with camera and post the video on YouTube. 73 de Federico IZ1FID ?
|
Re: FS: PRC-319 with working emu
Nothing stranger than some is all I can say. I hope you sell your PRC 319 Mark, they are unique and different, I have owned mine for more than a year now and had great fun out portable with many contacts, which is where it should be used and not sat in a shack gathering dust. Out of interest do you have spare control cables for turf to main unit connection I am using a standard 7 pin clansman and it does not fit right so will need to file locking tabs down.
|
Re: Racal Cougar Battery Pinouts
4515 nimh batts are available? From.?
toggle quoted message
Show quoted text
On 17 Dec 2019, at 23:55, Spence M0STO via Groups.Io <unavailable.equal@...> wrote:
?Dear fellow radio amateurs, I am the owner of about 6 x PRM4515L’s which have been refurbed and repaired. I’m also fortunate enough to own a handbag programmer, 3 battery conditioner chargers, ECUs and SMTs alike however the one thing I’m surprisingly short of is batteries. I have a few primary cells that are unissued and a handful of secondary Nicads. Problem is that of the 5 or so secondary cells that I’ve tried to disassemble to re’cell have always just crumbled. Most of the time they are also potted and a nightmare to break out. I know that the internals have a diode and a thermistor however the wiring is super complicated for something so very simple. Does anyone have a correct schematic and values of the diode and thermistor as good clean secondary cells are very, very hard to come by.
Many thanks, kind regards,
De Spence M0STO
|
Racal Cougar Battery Pinouts
Dear fellow radio amateurs, I am the owner of about 6 x PRM4515L’s which have been refurbed and repaired. I’m also fortunate enough to own a handbag programmer, 3 battery conditioner chargers, ECUs and SMTs alike however the one thing I’m surprisingly short of is batteries. I have a few primary cells that are unissued and a handful of secondary Nicads. Problem is that of the 5 or so secondary cells that I’ve tried to disassemble to re’cell have always just crumbled. Most of the time they are also potted and a nightmare to break out. I know that the internals have a diode and a thermistor however the wiring is super complicated for something so very simple. Does anyone have a correct schematic and values of the diode and thermistor as good clean secondary cells are very, very hard to come by.
Many thanks, kind regards,
De Spence M0STO
|
Re: FS: PRC-319 with working emu, group edicate.
ALWAYS edit the subject line to reflect the content of the message!? When an item is offered for sale, always include a price and location. Conduct all negotiations off-list.
Thanks
Dennis Starks
Military-Radio-Guy
KB?SFP
HFpack/Milpack/MMRCG
Monitor all:
3996usb, 5357usb, 7296usb,
14342.5usb, 18157.5usb, 29.4fm, 51.0fm
MMRCG.org
On Tuesday, December 17, 2019, 05:17:19 PM CST, Mark Mellinger <mmellinger100@...> wrote:
That is because , for some reason, he (Fredrico) replied to my original post , inserting his for sale items into my post. ?Not sure why he did this but I would like a correction posted.
If any one is interested in my prc-319 I can provide pictures and answer any questions.
Thanks
Mark
KE5QEO?
Get
From: [email protected] on behalf of Andy_G8JAC via Groups.Io <g8jac@...>
Sent: Tuesday, December 17, 2019 17:05
To: [email protected]
Subject: Re: [RacalRadio] FS: PRC-319 with working emu
?
The photos are not a PRC-319.? That’s a Marconi Scimitar H.
?
Andy? G8JAC
?
?
Subject: Re: [RacalRadio] FS: PRC-319 with working emu
?
Here you find two photos that I made in 2009 when I bought the radio, if you are interested I can do a video with camera and post the
video on YouTube
?
?
?
Da:
[email protected] <[email protected]>
Per conto di kim campbell
Inviato: martedì, 17. dicembre 2019 13:37
A: [email protected]
Oggetto: Re: [RacalRadio] FS: PRC-319 with working emu
?
Fedrico what is your asking price?
|
Re: FS: PRC-319 with working emu
That is because , for some reason, he (Fredrico) replied to my original post , inserting his for sale items into my post. ?Not sure why he did this but I would like a correction posted.
If any one is interested in my prc-319 I can provide pictures and answer any questions.
Thanks
Mark
KE5QEO?
Get
toggle quoted message
Show quoted text
From: [email protected] on behalf of Andy_G8JAC via Groups.Io <g8jac@...>
Sent: Tuesday, December 17, 2019 17:05
To: [email protected]
Subject: Re: [RacalRadio] FS: PRC-319 with working emu
?
The photos are not a PRC-319.? That’s a Marconi Scimitar H.
?
Andy? G8JAC
?
?
Subject: Re: [RacalRadio] FS: PRC-319 with working emu
?
Here you find two photos that I made in 2009 when I bought the radio, if you are interested I can do a video with camera and post the
video on YouTube
?
?
?
Da:
[email protected] <[email protected]>
Per conto di kim campbell
Inviato: martedì, 17. dicembre 2019 13:37
A: [email protected]
Oggetto: Re: [RacalRadio] FS: PRC-319 with working emu
?
Fedrico what is your asking price?
|
Re: FS: PRC-319 with working emu
The photos are not a PRC-319.? That’s a Marconi Scimitar H. ? Andy? G8JAC ? ? Subject: Re: [RacalRadio] FS: PRC-319 with working emu ? Here you find two photos that I made in 2009 when I bought the radio, if you are interested I can do a video with camera and post the video on YouTube ? ? ? Da: [email protected] <[email protected]> Per conto di kim campbell
Inviato: martedì, 17. dicembre 2019 13:37
A: [email protected]
Oggetto: Re: [RacalRadio] FS: PRC-319 with working emu ? Fedrico what is your asking price?
|
Re: FS: PRC-319 with working emu
Here you find two photos that I made in 2009 when I bought the radio, if you are interested I can do a video with camera and post the video on YouTube ? ? ? Da: [email protected] <[email protected]> Per conto di kim campbell
Inviato: martedì, 17. dicembre 2019 13:37
A: [email protected]
Oggetto: Re: [RacalRadio] FS: PRC-319 with working emu ? Fedrico what is your asking price?
|
Re: FS: PRC-319 with working emu
Hi my Friend I ask 2500 Euro including shipment. 73 de Federico IZ1FID ? Da: [email protected] <[email protected]> Per conto di kim campbell
Inviato: martedì, 17. dicembre 2019 13:37
A: [email protected]
Oggetto: Re: [RacalRadio] FS: PRC-319 with working emu ? Fedrico what is your asking price?
|
Re: FS: PRC-319 with working emu
Fedrico what is your asking price?
|
Re: FS: PRC-319 with working emu
For sale MARCONI SCIMITAR H in good working order with hopping? and ?battery pack (empty). Fotos or video upon request. 73 de Federico IZ1FID ?
|
Spence G5STO
Robin Maddison