The spanner as you call it is a peg puller/remover from the GMM antenna kit, it is used to withdraw the four pegs holding it down and is housed with the pegs in the carry case.
Doug
TA sema4radios
toggle quoted message
Show quoted text
On 20 July 2020 at 20:41 x_racal <groups@...> wrote:
Not ferrite beads, but plastic cup-shaped insulators.
The photo shows some of these insulators plus the special spanner for the centre 'nut' on the underside of the HF base that clamps the P11 cable in place. I don't have a HF base so can't show the completed assembly.
73,
Peter
G4DJB
?
