Re: Syncal 30 , fails to return to RX
|
Racal Syncal 30's are notourious for sticking relays, try to get your relay cleaned with switch cleaner
Stuart
PA/G0TBI/P Den Haag
-----Original Message-----
From: Graham <g0nbd@...>
To: RacalRadio < [email protected]>
Sent: Wed, 5 Feb 2020 22:52
Subject: [RacalRadio] Syncal 30 , fails to return to RX
Syncal 30 , fails to? return to RX
Started as? intermittent fault and is now? permanent , a plus point? , I suppose?
Basically , TX and? Rx? are ok,? all? modes ,? the? problem is ,? once? TX has been? engaged ,??
on releasing the? PTT , the? set? returns to? RX , meter? shows the? battery? voltage? and there? is?
slight? ?noise from the? head set??
But , the? RX is? actually? NOT working ,?
Rx can be? recovered , by? powering? the? radio? OFF and? back ON ,? ?
where? there? is? a? couple? of? beeps? from the? synth? lock ind , then? it works?
normally ,?
Not taken the? covers of? yet,? looking? to see? if this? fault is? a ''known''? ?condition
and / or? any? pointers as? to? possible? cause ...?
Initially? double? clicking the? ptt could? remove the? fault ,??
Rx audio? , during tx is? ?switched ??
Tnx - Graham?
g0nbd
|
