Re: R1CBU and digital modes
|
Ok. Update.
It does work.
Flrig somehow won't talk to it. But if I use hamlib DIRECTLY, it all works.
$ rigctld -m 3087 -r /dev/ttyACM1 -s 19200 -C stopbits=1 &
and set all my digital modes to use hamlib
Jerry ---- Extra Ham Radio Operator: WF5W Registered Linu=x User: 275424 3D CAD designer
The most exciting phrase to hear in science - the one that heralds new discoveries - is not "Eureka" but "That's funny...". - Isaac. Asimov
On Fri, Dec 8, 2023 at 10:10?AM Jerry Davis < wf5w.ms@...> wrote: Ok. I have tried everything known to mankind, to get digital modes to work with R1CBU.
It was my understanding that R1CBU was just a different GUI, on top of the radio. It is NOT.
So at first I thought that flrig was at fault. So I booted up the default rig, and changed wsjtx to use IC-705 and set it up for CAT control. It worked flawlessly (via ttyACM1). So, I knew that everything was working.
I rebooted into R1CBU v19. And I didn't use flrig either. So all I was using was the hamlib part of wsjtx. Same IC-705, same CAT control parameters. Nothing. So, I can only come up with the conclusion, that R1CBU doesn't work with digital modes.
Too bad, I wanted it to, so bad. I like the interface.
Jerry ---- Extra Ham Radio Operator: WF5W Registered Linu=x User: 275424 3D CAD designer
The most exciting phrase to hear in science - the one that heralds new discoveries - is not "Eureka" but "That's funny...". - Isaac. Asimov
|
