Re: Newbie Tech looking for some help setting u
|
Joe, and everyone else to gave me help on the Baofeng, I got it working with the help of KI7QZP (credit where credit is due). Turns out that the CHIRP software sais it's setting certain setting which actually it doesn't set in the radio and thus they have to be added manually after programming. We did get it working now with manual programming of the offset. Thanks again to everyone and im looking forward to meeting some of you at a club meeting soon. Ron
Just a note: I am continuing this thread on the Group just for edification on diagnosing issues.
They seem ok but you are probably not going to fire up those two repeaters in Phoenix.
Lets work one issue at a time.
You don't see the contents of your memory location menus on the radio, you can only see VFO setting for the menus of the band you are on.
In VFO mode (440 Mhz band), program in the frequency I said before - 449.325 and enter the following in the Menus...
Number 1 -5k
Number 7 -OFF
Number 10 -OFF
Number 11 -OFF
Number 12 -OFF
Number 13 -100.0 Hz
Number 25 - (-)
Number 26 -005.000
Now, when you transmit the display will change from 449.325 to 444.325.
I'll be listening
Joe, N2QOJ
On Thu, Mar 5, 2020 at 2:13 PM Ron Watkins < rwatki@...> wrote: Joe, in an effort to be clearer about this, im including a screen shot of the CHIRP window showing the 2 repeaters I have tried. According to this screenshot, both the PL tone and frequency offset are programmed already. Not sure what else needs to be done.
-- Ron Watkins
602.743.5272
|
