开云体育

Thanks Walker, appreciate the tip. Didn’t want to waste the UltraHD MB ink I have. So any tips like that are very helpful!

Thanks Blayne, that’s literally what I was thinking too. Just try it. It’s all about trying and learning anyways.

80% carbon is going to be very very close to 100%. You have a lot of dots printing in the shadows so you can afford to go to 70% on shade 2 and then bring the others closer especially in the middle

If I were you I’d use whatever I wanted to. Doing my own linearization it should all work out. If it were me, I would want one toner position that I could use depending on what I was trying to do so

I just bought an? I1 pro 1 on Ebay to replace one I'd been using for years. The X-rite label identifies it as a? REV D, but its stamped EFI-ES1000, and comes with EFI software. Windows 11 detects

I've got my Epson 7800 running matte black ink in refillable carts. I've experimented with a couple different ink sets, with and without LC/LM toner carts to neutralize the warmth of the carbon

Hi Roy I am attaching a screen shot that shows what controls are available with the Layout pull down. There is nothing there at all ?similar to Layout with Epson printers. Will follow ?your

Hi Sandy I'm not familiar with the Canon printers and driver but I'd expect it's similar enough to Epson. I see you've gotten down to the Layout pull down. I'd be curious to see what you get under

Here is a screenshot showing where the Epson Advanced Color Settings should be found. I'm pretty sure that Print-Tool is compatible with most if not all printers, though mine are all Epsons except for

My print tool is not showing that layout drop down menu. It used to. Any thoughts or recommendations would be greatly appreciated. Thanks Jeff wrote:

Hi Sandy, In Print-Tool go to the drop-down menu that shows Layout in your screenshot and select Printer Settings, then choose Advanced Color Settings (may have different name on a Canon). That gets

Sandy King ( /g/QuadToneRIP/message/18705 ) 12:34pm #18705 ( /g/QuadToneRIP/message/18705 ) I am trying to print with Print Tool 2.3.8 and a Canon Pro 1000 printer.

I get the same thing on a P7000. At a workshop I held in Stockholm in DTP before Christmas it turned out like this in various pictures of my students. Tried with different resolution and switched to 3

I responded privately but including some of what I wrote for the general public. I've been testing different transparency materials over the past few weeks to see if there is a suitable alternative

The drop down menu that defaulted to Layout?

correction: I'm running Sonoma 14.3 not monterey

I am also having a problem with print tool and it's happening with versions 2.3.2 and 2.3.4 I'm on Monterey 12.5.1. When I select Printer:Epson Stylus Pro 3880, Page Setup: Paper & Print Settings does

Hello, I’m struggling to print negatives for alt. processes. the negatives printed with QTR and the prints shows grain or what I assume is a dither pattern. Pleas see the image attached. The

Hi, I am a printmaker in Amsterdam (the Netherlands) Recently I purchased an Epson P6000 for DTP. I use PrintTool, QTR 2.7.9 and Mac OS Mojave 10.14.6 At first I got small horizontal lines on the

Pinging Brad on this. Warmest regards all, -Walker